Home
>
Addonics Technologies
>
HDD Duplicator
>
Addonics Technologies Mixed Media Duplicator MDCCM11 User Manual
Addonics Technologies Mixed Media Duplicator MDCCM11 User Manual
Here you can view all the pages of manual Addonics Technologies Mixed Media Duplicator MDCCM11 User Manual. The Addonics Technologies manuals for HDD Duplicator are available online for free. You can easily download all the documents as PDF.
Page 1
Technical Support If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at: Hours: 8:30 am - 6:00 pm PST Phone: 408-453-6212 Email: http://www.addonics.com/support/query/ v3.1.11 www.addonics.com T E C H N O L O G I E S User Guide 1:11 Mixed Media Duplicator (MDCCM11)
Page 2
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ Connecting th e Power Cable a nd Powering On a .Connect the power cord provided f rom the wall outlet to the back of the t ower. b .P ush t he power button t o turn on the HDD duplicat or. The D uplicato r P an elT here are four buttons and an LCD on the panel of HDD Duplic ato r. 1 – LCD s hows a funct ion or a mess age. 2 – it is used t o s c roll up f...
Page 3
![Page 3
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Quick Start
By default, the duplicator will initialize, scan for drives and offer the copy function.
Insert the source and target drives, power up the unit, wait for the co\
py function to
appear, then press ENT.
Canceling Functions
When selection menu options, canceling is done by pressing ESC. When the\
unit is
busy performing an operation such as copy, verify, or overwrite,...](http://img.usermanuals.tech/thumb/181/2470/w300_mixed-media-duplicator-mdccm11-1478567341_d-2.png "Page 3
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Quick Start
By default, the duplicator will initialize, scan for drives and offer the copy function.
Insert the source and target drives, power up the unit, wait for the co\
py function to
appear, then press ENT.
Canceling Functions
When selection menu options, canceling is done by pressing ESC. When the\
unit is
busy performing an operation such as copy, verify, or overwrite,...")
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ Quick Start By default, the duplicator will initialize, scan for drives and offer the copy function. Insert the source and target drives, power up the unit, wait for the co\ py function to appear, then press ENT. Canceling Functions When selection menu options, canceling is done by pressing ESC. When the\ unit is busy performing an operation such as copy, verify, or overwrite,...
Page 4
![Page 4
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
NOTE: some drives will remain in a locked state when the process is complete.\
Drives
that are locked may not appear to an operating system and will cause an \
I/O error if
used as a target in the duplicator. If this happens, start secure erase again and hold
ESC to cancel the operation a few moments after it begins.
9. Overwrite
Overwrite is used to write data onto the entire...](http://img.usermanuals.tech/thumb/181/2470/w300_mixed-media-duplicator-mdccm11-1478567341_d-3.png "Page 4
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
NOTE: some drives will remain in a locked state when the process is complete.\
Drives
that are locked may not appear to an operating system and will cause an \
I/O error if
used as a target in the duplicator. If this happens, start secure erase again and hold
ESC to cancel the operation a few moments after it begins.
9. Overwrite
Overwrite is used to write data onto the entire...")
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ NOTE: some drives will remain in a locked state when the process is complete.\ Drives that are locked may not appear to an operating system and will cause an \ I/O error if used as a target in the duplicator. If this happens, start secure erase again and hold ESC to cancel the operation a few moments after it begins. 9. Overwrite Overwrite is used to write data onto the entire...
Page 5
![Page 5
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
NOTE: Target drive size is still required to be equal to or greater than source\
. Only
works with source drives formatted using Master Boot Record. If the sour\
ce drive has a
boot record other than MBR, the entire disk will be copied as if Fast Co\
py were OFF. If
the source drive is formatted with a Master Boot Record and contains onl\
y FAT32 or
NTFS partitions, identical...](http://img.usermanuals.tech/thumb/181/2470/w300_mixed-media-duplicator-mdccm11-1478567341_d-4.png "Page 5
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
NOTE: Target drive size is still required to be equal to or greater than source\
. Only
works with source drives formatted using Master Boot Record. If the sour\
ce drive has a
boot record other than MBR, the entire disk will be copied as if Fast Co\
py were OFF. If
the source drive is formatted with a Master Boot Record and contains onl\
y FAT32 or
NTFS partitions, identical...")
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ NOTE: Target drive size is still required to be equal to or greater than source\ . Only works with source drives formatted using Master Boot Record. If the sour\ ce drive has a boot record other than MBR, the entire disk will be copied as if Fast Co\ py were OFF. If the source drive is formatted with a Master Boot Record and contains onl\ y FAT32 or NTFS partitions, identical...
Page 6
![Page 6
11-03. Compare Firmware
Used to confirm correct firmware. Connect a drive formatted as FAT containing
one partition with the firmware file in the root directory.
NOTE: This function scans the entire disk before proceeding. Providing a drive\
that is as small as possible is strongly recommended.
11-04. Quick Erase HDD
Scans the ports, then quickly erases all sectors on all connected drives\
.
11-05. Full Erase HDD
Scans the ports, then completely erases all sectors on all connected dri\
ves.
11-06. H/W...](http://img.usermanuals.tech/thumb/181/2470/w300_mixed-media-duplicator-mdccm11-1478567341_d-5.png "Page 6
11-03. Compare Firmware
Used to confirm correct firmware. Connect a drive formatted as FAT containing
one partition with the firmware file in the root directory.
NOTE: This function scans the entire disk before proceeding. Providing a drive\
that is as small as possible is strongly recommended.
11-04. Quick Erase HDD
Scans the ports, then quickly erases all sectors on all connected drives\
.
11-05. Full Erase HDD
Scans the ports, then completely erases all sectors on all connected dri\
ves.
11-06. H/W...")
11-03. Compare Firmware Used to confirm correct firmware. Connect a drive formatted as FAT containing one partition with the firmware file in the root directory. NOTE: This function scans the entire disk before proceeding. Providing a drive\ that is as small as possible is strongly recommended. 11-04. Quick Erase HDD Scans the ports, then quickly erases all sectors on all connected drives\ . 11-05. Full Erase HDD Scans the ports, then completely erases all sectors on all connected dri\ ves. 11-06. H/W...