Addonics Technologies Internal Drive Cartridge System AEMMCFBY user guide

							Technical Support
If you need any assistance to get your unit functioning properly, please have your 
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v5.1.11
T E C H N O L O G I E S
www.addonics.com
User Guide
Multi-Media Bay(AEMMCFBY)         
						

							Cable connections for CF reader: 
1.  Plug-in the SATA cable into a SATA port.
2.  Connect a 15-pin SATA power connector from the power supply to the 15-pin  
  SATA power on the CF reader. 
Cable Connections for Multi-media bay:
1.  A SATA power & data Y-cable is provided with the multi-media bay. Connect  
  this cable to the SATA connection at the back of the bay.
2.  The SATA power & data Y-cable has a third connector. Attached this   
  connector to the power and drive activity LED connector as labeled above\
.
If this connector is not connected, the power & drive activity LEDs located on the front 
of the multi-media bay will not function.
www.addonics.com
Phone:   408-573-8580
Fax:     408-573-8588
Email:   http://www.addonics.com/sales/query/
CONTACT US
CF SATA Port
CF 15-Pin SATA Power Connector
Drive Door Swings Open to Accommodate a 3.5” SATA Drive
Power LED
Drive Activity  LED
Reserved Connector
Power and Drive Activity LED ConnectorSATA Connection