Home > Addonics Technologies > Flash / SSD Reader and adapter > Addonics Technologies Internal DigiDrive Flash Reader AEDMDISU2 user guide

Addonics Technologies Internal DigiDrive Flash Reader AEDMDISU2 user guide

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Addonics Technologies Internal DigiDrive Flash Reader AEDMDISU2 user guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 299 Addonics Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 2
    Add page 1 to Favourites
    image text
    Enable zoom 
    							Technical Support
If you need any assistance to get your unit functioning properly, please have your 
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v7.1.11
T E C H N O L O G I E S
User Guide
Internal IDE/SATA/USB
DigiDrive (AEDMDISU2)
Mode Jumper (JP4):
Note: Only applies on SATA connection
The internal SATA / USB DigiDrive supports Type I, II CF Cards, CF Micro drive, SD, SDHC, miniSD 
(with adapter), Trans flash, SD HS (Secure Digital High Speed), MMC Cards (4-bit and 8\
-bit modes), 
RS-MMC, MMC-Micro, MMC Plus, Smart Media, xD picture card- both H and M \
types, Memory 
stick, Memory stick PRO, MS Extreme III Type media, MS PRO, HS (4-bit mode).
SATA Port 2 (Slave)
Standard 40-Pin IDE Interface for Mounting
Directly onto Motherboard IDE Channel
4-Pin Floppy Power ConnectorSATA Port 1 (Master)
SATA 1.5Gbs
Data Port
4-Pin Floppy
Power Port
Mode Jumper JP4
(Close or Open)
Drive Activity  LED 4 slots - CF, SD, MMC, MiniSD, SM,
xD, MS, MS Duo and MS Pro Duo
USB 5-Pin Header
Pin 1
    Add page 2 to Favourites
    image text
    Enable zoom 
    							Motherboard
I.  Setting up the device in SATA mode  a.   Connect a 4-pin floppy power cable from PC to the internal SATA / USB DigiDrive.
  b.   Attach SATA cable from internal SATA / USB DigiDrive to the PC SATA port.
The tables show drive icon and media detection behavior basing on the mo\
de switch setting and the 
type of SATA port the internal SATA / USB DigiDrive is connected to.
Open mode – force flash media to become Fixed disk type
Close mode – force flash media to become 
II.  Setting up the device in USB Mode  a.   Connect a 4-pin floppy power cable to the internal SATA / USB DigiDrive.
  b.   Attach USB 5-pin header from internal SATA / USB DigiDrive to USB header on    
  PC.
  c.   The drive icon appears only when flash media is inside the internal SATA / USB    
    DigiDrive.The drive icon will disappear and reappear during media change\
.
Note for AEIDDSAUWP: If an unformatted flash media is use, no drive icon will sho\
w up in My 
Computer.
Media PriorityWhen more than one media is inside the internal SATA / USB DigiDrive during bootup, the media that 
gets detected first is according to the priority shown below
1.  Compact Flash
2.  Smart Media / xD Picture card
3.  MMC / SD
4.  Memory Stick
Drive Icon
Not Recommended
Icon always there with or without
flash media inside the DigiDriveMedia Detection
Flash media is automatically
refresh and detected when
added or removed
Flash media automatically
detected when added or
remove 
Hot Swap SATA port
Non hot swap SATA port
Drive Icon
Icon appears only when flash media
is inside
Icon appears only when flash media
is inside Media Detection
Flash media is automatically
refresh and detected when
added or removed
Flash media detection requires 
manual refresh in Device
Manager
Hot Swap SATA port
Non hot swap SATA port
SATA Connection
    All Addonics Technologies manuals Comments (0)

    Related Manuals for Addonics Technologies Internal DigiDrive Flash Reader AEDMDISU2 user guide