Addonics Technologies External DigiDrive Flash Reader PUDDE user guide

							www.addonics.com
Technical Support
If you need any assistance to get your unit functioning properly, please have your 
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v6.1.11
T E C H N O L O G I E S
User Guide
Pocket UDD II
(PUDDEPU3 / PUDDESP / PUDDES
PPROEPU3 / PPROESP / PPROES)         
						

							www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Any flash media below is compatible to use with the Pocket Ultra Digidri\
ve II, 
using the optional Addonics CF DigiAdapter and 4-in-1 DigiAdapter or 
equivalent third party adapter.
Note:   The Pocket UDD ii is not compatible with Wireless Broadband card,    
  Panasonic P2 card, SRAM card and Linear Memory card.
Back
Front
LED
Flash Media Slot
Eject Button5V Power Input
eSATA Port
MDCF-ICF-II
MSSMSDMMC
ATA FlashPCMCIA Hard Drive
XD Memory AdapterXD
CF DigiAdapter
4-in-1 DigiAdapter 
						

							www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Universal eSATAp Cable
Hybrid eSATA Port
(eSATAp)
Universal eSATAp Cable
eSATAp to USB 3.0 Adapter
USB 3.0/2.0 Port
Standard eSATAp Cable
eSATA Port
Power Adapter  or
USB Power Cable 
						

							www.addonics.com
Phone:   408-573-8580
Fax:     408-573-8588
Email:   http://www.addonics.com/sales/query/
CONTACT US
Operation of the Pocket UDD II
A.  Pocket UDD II is connected via USB.
1.  Insert the media fully into the device using PCMCIA adapters and your operating system  
  will report new hardware detected and begin to install the device. This may take a few   
  seconds before a new drive icon appears in the My Computer folder. During this    
  initialization, the LED light on the Pocket UDD II toggles between red a\
nd green color;   
  and will stay green once the computer recognizes the media.
2.  Once the drive icon appears, the media is now ready and can be used like\
 regular floppy  
 media.
3.  During the read / write operation, the LED light of the Pocket UDD will \
blink red.
4.  To remove the media, click on the Safe Remove icon to stop the connection\
 as shown  
  below. Once the “you may now safely remove window” shows up, you can th\
en remove  
  the media from the Pocket UDD II by pushing on the eject button. 
Note:   If you eject the media from the Pocket UDD without checking the Safe Rem\
ove icon, a  
  warning message will appear from Windows 98SE, Me and 2000. This message is a    
  reminder that it is safer to use the Safe Remove icon when you remove th\
e media to    
  prevent possible data loss in case you are in the middle of copying a fi\
le to and from the  
  media. You can go ahead and close this message.
5.  Do not pull the media out of the device without using the eject button. \
This may crash the  
  computer, as it does not realize the media has been manually removed from the de\
vice.
B.  Pocket UDD II is connected via eSATA
Note:  Before connecting the Pocket UDD II, it is assumed that you have install\
ed the drivers of  
  the eSATA controller card. You do not need to install any third-party driver for the Pocket  
  UDD II.
1.  Insert the media fully into the device using PCMCIA adapters and your operating system  
  will report new hardware detected and begin to install the device. This may take a few   
  seconds before a new drive icon appears in the My Computer folder. During this    
  initialization, the LED light on the Pocket UDD II toggles between red a\
nd green color;   
  and will stay green once the computer recognizes the media.
2.  Once the drive icon appears, the media is now ready and can be used like\
 regular floppy  
 media.
3.  During the read / write operation, the LED light of the Pocket UDD will \
blink red.