Addonics Technologies Duplicator Subsystem HDUSAS user guide

Technical Support
If you need any assistance to get your unit functioning properly, please have your 
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v3.1.11
User Guide
1:1 Duplicator
(HDUSAS)
T E C H N O L O G I E S
www.addonics.com
ENT
ESC         

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
ENT
ESC
Diagram
ENT
ESC
Duplicator Panel
LCD
Scroll Up
Scroll Down
Executes Function
Cancels Function
Source
SATA Port
4-pin Floppy Power
ConnectorDestination
SATA Port
Mounting Holes
(2 on each side) 

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Quick Guide
Installing the 1:1 duplicator
Step 1
Insert the 1:1 duplicator into standard 5.25” drive bay.
Step 2
Connect the power cable from you system to the 4-pin floppy power connec\
tor.
Step 3
Connect the source drive to the source SATA port via SATA cable and the target 
drives to the destination SATA port via SATA cable.
 
Step 4
Screw the duplicator into the drive bay with 4...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
ENT
ESC
Duplicator Panel
LCD
Scroll Up
Scroll Down
Executes Function
Cancels Function
The Duplicator has 6 functions to choose from:
1. Copy
2. Compare
3. PreScan Source
4. ReScan BUS
5. Source Size
6. Setup
7. USB Mode
6-1. Language
6-2. Copy Size
6-3. Startup Menu
6-4. Auto  Compare
6-5. Copy with Size
6-6. Button Sound
6-7. Device Info
6-8. System Info
Within function 6, there are...

1. CopyMake sure that the capacity of the target is equal or larger than the so\
urce.
Copies data directly from the source to the target.
Choose option 1 from the menu and press ENT to begin copying. The system will
auto detect the source/target and display info about the copying process\
. Once
the copying process is complete, the LCD will display Copy OK.
2. CompareCompare is used to see if the data on the source is identical to the tar\
get after the
copy operation.
Choose option 2 and press ENT to...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Setup Functions
6-1. Language
Use this option to select the language of the system, by default it’s set at English.
6-2. Copy Size
This option is used to specify the size of the source for simplifying fu\
rther copying
operations.
Press ENT on this option and the LCD will display Copy Size ALL. Use the up 
and down arrow keys to change the copy size. The system will offer...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
6-7. Device Info
This option will diplay the details of everything connected to the contr\
oller.
6-8. System Info
This option will display the system information.
7. USB Mode
NOTE: Though this is an active menu option, we recommend you not use
this option since there is no USB connection for this unit. This duplicator is
a standalone unit.
Troubleshooting
LCD
If the LCD display is...

www.addonics.com
Phone:   408-573-8580
Fax:     408-573-8588
Email:   http://www.addonics.com/sales/query/
CONTACT US
LCD Messages
Connecting with a HDD:
All data will be lost, format?
All data will be lost. Confirm formatting.
Delete Image in Partition xx?
Confirm the deleting of data image in partition xx.
Format?
Ask if you want to format.
Format OK!
The formatting has been completed.
HDD not Format!
The hard disk hasn’t been formatted yet.
HDD too small
The capacity of hard disk is too small.
HDD too...