Addonics Technologies Duplicator Subsystem HDU11SAS user guide

Technical Support
If you need any assistance to get your unit functioning properly, please have your 
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v3.1.11
T E C H N O L O G I E S
www.addonics.com
User Guide
1:11 Duplicator
(HDU11SAS)
ENT
ESC         

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Diagram
ENT
ESC
Duplicator Panel
LCD
Scroll Up
Scroll Down
Executes Function
Cancels Function
ENT
ESC
11 Destination
SATA Ports
Source
SATA Port(top port)
15-pin SATA
Power Connector
Mounting Holes
(2 on each side) 

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Quick Guide
Installing the 1:11 duplicator
Step 1
Insert the 1:11 duplicator into standard 5.25” drive bay.
Step 2
Connect the SATA power cable from you system to the 15-pin SATA power 
connector.
Step 3
Connect the source drive(s) to the source SATA port(s) via SATA cable(s) and the 
target drives to the destination SATA ports via SATA cables.
 
Step 4
Screw the duplicator into the...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
1. Copy HDD
Make sure that the capacity of the target is equal or larger than the so\
urce.
Copies data directly from the source to the target.
Choose option 1 from the menu and press ENT to begin copying.  The system will 
auto detect the source/target and display info about the copying process.  Once 
the copying process is complete, the LCD will display Copy OK.
2. Async Copy HDD...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
3. Compare HDD
Compare HDD is used to see if the data on a source hard disk is identical to the 
target hard disk after the Copy HDD operation.
Choose option 3 and press ENT to begin comparing. 
4. Async Compare
Compare HDD is used to see if the data on a source hard disk is identical to the 
target hard disk after the Copy HDD operation.  While compare process is 
on-going, allows...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Setup Functions
8-1. Language
Use this option to select the language of the system, by default it’s set at English.
8-2. Copy Size 
This option is used to specify the size of the source for simplifying further copying 
operations.
Press ENT on this option and the LCD will display Copy Size ALL.  Use the up 
and down arrow keys to change the copy size.  The system will offer...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
8-9. Auto Start Drive
This option is used to copy automatically once you inserted a HDD on target port. 
Default is set at OFF, use the arrows to toggle.
8-10. Auto Start Timer
This option is used to set the period of time when the duplicator starts copying 
automatically once you insert HDD on target port.  Default is set at OFF, use the 
arrows to choose time.
8-11.  Tolerance...

www.addonics.com
Phone:   408-573-8580
Fax:     408-573-8588
Email:   http://www.addonics.com/sales/query/
CONTACT US
LCD Messages
Connecting with a HDD:
All data will be lost, format?
All data will be lost. Confirm formatting.
Delete Image in Partition xx?
Confirm the deleting of data image in partition xx.
Format?
Ask if you want to format.
Format OK!
The formatting has been completed.
HDD not Format!
The hard disk hasn’t been formatted yet.
HDD too small
The capacity of hard disk is too small.
HDD too...