Addonics Technologies Duplicator Subsystem DDUSAS User Manual

www.addonics.com
Blu-Ray / DVD / CD
Duplicator Subsystem
(DDUSAS)
Technical Support
If you need any assistance to get your unit functioning properly, please have
your product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/ 

Overview
Arrow Keys are used to navigate menus or select options.
Enter Key is used for Executing a function or confirm an option.
Escape Key is used for canceling a selection, or while a function is in progress, holding it
for  two seconds  will cancel  that  function.  Holding the Escape Key  on a  menu  will enable
access to the Advanced Setup Menu.
1www.addonics.comTechnical Support (M-F 8:30 am – 6:00 pm)
Connectors
Ta r g e t  
PortSource 
Port
HDD 
PortPower 
Connector
Front Panel
LCD...

Power On Sequence
When  first  powered  on,  the  duplicator  subassembly  will  perform  self-tests  and  wait  for  a
delay  period  to  allow  drives  to become  ready.  After  this  it  will  scan  ports  for  drives,  then
display the default menu option (factory set to COPY).
Duplicator Functions
The  duplicator  has  six  menu  sections:  The  Main  menu,  Image,  Edit  Track,  Lightscribe,
Setup  Options  and  Advanced  Setup.  Advanced  Setup  Options  is  accessed  through  the
Main menu....

9. Image
Manage the hard disk and data used as a source instead of the SOURCE drive.
NOTE:  All  Image  menu  options  show  the  currently  selected  “Partition”  (image)  on
the top line.
9-01. Load
Read a disc from the currently selected Image Source drive and write it to the current
Partition.
9-02. Delete Image
Deletes the currently selected Partition from the internal hard disk. Top line asks for
confirmation, bottom line shows the currently selected Partition, what kind of image it
is, and its...

10-04. Close Session
Manually closes the last session on target Audio CDs. Target media will no longer be
able to add more tracks. Closing the final session on Audio CDs is recommended for
best compatibility with audio CD players.
11 .  S e t up  M e n u
Allows changes to the following default settings:
11-01. Language
Selects language used for menus.
11-02. CD Burn Speed
Sets  the  maximum  speed  for  burning  CDR  or  CDRW  media.  Default  setting  is
Maximum,  other  choices  include  modes  offered...

11-13. Display Time
When  set  to  ON,  unit  will  display  a  timer  during  copy  operations.  Default  setting  is
ON.
11-14. Button Sound
When  set  to  ON,  unit  will  emit  a  beep  sound  whenever  keys  are  pressed.  Default
setting is ON.
11-15. Device Info
Displays details about each drive unit.
11-16. System Info
Displays details about the duplicator.
11-17. Quick Erase
Erases file system on all rewritable media detected.
11-18. Full Erase
Erases all data on all rewritable media detected....

14-08. Compare Firmware
Used to confirm Duplicator subsystems firmware matches a file. Insert a CD-RW disc
containing the firmware and press ENT. The duplicator will search for the correct file
and if found, compare its firmware against the file.
14-09. H/W Diagnostic
Performs a series of tests on the duplicator subsystem hardware.
14-10. Load Default
Changes all configuration settings to their default setting.
14-11. CD+G
When  set  to  ON,  enables  copying  of  CD+G  (Compact  Disc  +  Graphics)...

Contact Us
www.addonics.com
Phone: 408-573-8580
Fax: 408-573-8588
Email: http://www.addonics.com/sales/query/