Addonics Technologies Duplicator Subsystem DDU7SAS user guide

User Guide
1:7 Blu-Ray / DVD Duplicator
(DDU7SAS)
Technical Support
If you need any assistance to get your unit functioning properly, please have your 
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v7.1.11
T E C H N O L O G I E S
www.addonics.com
ENT
ESC         

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Diagram
ENT
ESC
Duplicator Panel
LCD
Scroll Up
Scroll Down
Executes Function
Cancels Function
ENT
ESC
7 Destination
SATA Ports
Source
SATA Port(top port)
15-pin SATA
Power Connector
Mounting Holes
(2 on each side) 

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Quick Guide
Installing the 1:7 optical duplicator
Step 1
Insert the 1:7 Blu-Ray / DVD Duplicator into standard 5.25” drive bay\
.
Step 2
Connect the power cable from you system to the 4-pin floppy power connec\
tor.
Step 3
Connect the source drive to the source SATA port via SATA cable and the target 
drives to the destination SATA port via SATA cable.
 
Step 4
Screw the duplicator...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Panel Functions
ENT
ESC
Duplicator Panel
LCD
Scroll Up
Scroll Down
Executes Function
Cancels Function
The Duplicator has 6 functions to choose from:
1. Copy
2. Test
3. Test & Copy
4. Verify
5. Compare
6. Prescan
7. Disc Info
8. Select Source
9. Image
10. Edit Track
11. Lightscribe
12. Setup
7.1 Source
7.2 Target9.1 Load
9.2 Delete Image
9.3 Image Info
9.4 Compare Image
9.5 Select...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
1. CopyFunction#1 Copy, instant copy source (disc/image) to the target drives (optical writes). Use Function#8 
to select source drive before copying. Select function#1. place a source disc into source drive and blank 
disc into the target drives. A rewriteable disc can be used as target media, however all data will be 
erased before copying.
Press ENT to start copy function when all...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
9. Image
Function#9 Image is valid only when a hard disk is installed. Disc is lo\
aded to hard disk as an
image file.
9.1 Load
Load function loads whole disc data from any writers into the current pa\
rtition of the hard disk.
“P:A” means current partition is A.
9.2 Delete Image
If you want to delete an image file stored in a particular partition, yo\
u can use this function to...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
9.9 Format HDD
Hard disk must be formatted by the system for the very first time. Hard \
disk will be partitioned into
the chosen partition format.  If no hard disk is installed, LCD will sho\
w the message as No Valid HDD!
All data on the hard drive will be erased after the hard disk format. After the hard drive is formatted 
correctly, LCD will show “ Format HDD ok!.”, Press ENT to...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
10.3 Close Session
Single session format is used for Audio CD, and commercial audio player is not able to play open
session audio CD, therefor session must be closed to max. playback compa\
tibility. However, no
more tracks can be added once session is closed.
11 LightScribe (Optional Function)LightScribe is an optical disc recording technology that uses specially \
coated recordable...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
To select any function from #1 to # 13 as the first item appears on the s\
creen whenever system is
turned on.
12.6 Auto  Verify
To set if auto verify target disc's readability after copy function. The default is Off. Press ▼ to select On.
12.7 Auto  Compare
To set if auto do comparison after copy function to check if source and t\
arget disc are identical.
The default is Off....

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
12.19 Quick Compare
Quick Compare is related to function#5 Compare. Once compare error byte \
reach to the setting
figures, compare process will stop.
12.20 Link Mode Select (Select Models)
Now  press  ESC  and  ▼  to  enter  the  following  screen.    Press  ENT  to  enter  the  “Link  Mode  Select” 
screen.  Use  ▲  ▼  to  choose  between  the  Stand  Alone,  Middle  Tower  or...