Home > Addonics Technologies > Encryption > Addonics Technologies Diamond Cipher 35 SATA dcmr256 User Manual

Addonics Technologies Diamond Cipher 35 SATA dcmr256 User Manual

Add to Favourites
    Download as PDF

    View the Addonics Technologies Diamond Cipher 35 SATA dcmr256 User Manual for free. All the Addonics Technologies manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 Addonics T E C H N O L O G I E S Diamond Cipher AES 256-bit Mobile Rack Model: DCMR256I & DCMR256SC User’s Guide FCC Warning Statement This equipment has been tested and found to comply with the limits for a class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency...
    Page 2 Diamond Cipher key Check to make sure you have the correct version of the Diamond Cipher key. The key should match the label at the back of the drive enclosure. Black label AES-256 stands for Diamond Cipher 256-bit key IMPORTANT There is no back door for the Diamond Cipher encrypted hard drive if the key is lost or stolen. To ensure there is a spare key, your Diamond Cipher bundled kit comes with one pair of Diamond Cipher keys. These 2 keys have identical encryption...
    Page 3 Step 4 Turn the Diamond enclosure over with the hard drive mounting holes facing up. Use the included flat head screws to secure the hard drive onto the bottom of the enclosure and turn in the screw to the “LOCK” position. Powering On the Mobile Rack: Note: Be sure the Diamond cipher key is inserted into the drive enclosure prior to turning on the power of the drive cradle. The hard drive will not be detected by the computer if the power to the drive cradle is turned on...
    Page 4 Model: DCMR256SC Power: Using the 4-pin floppy connector of the Y-cable, connect it to the floppy- type power connector on the converter. To provide power for the y-cable, connect it to one of your desktops 4-pin molex cable. Data: Connect the SCSI cable to the 68-pin SCSI connector of the SATA to SCSI converter board and to your SCSI controller. LED cable: No need to connect. By factory default, LED signal would come from the hard drive. Powering On Drive Cradle: To power on the drive...
    Start reading Addonics Technologies Diamond Cipher 35 SATA dcmr256 User Manual

    Related Manuals for Addonics Technologies Diamond Cipher 35 SATA dcmr256 User Manual

    All Addonics Technologies manuals