Home > Addonics Technologies > Flash / SSD Reader and adapter > Addonics Technologies CF DigiAdapter ADIDECF user guide

Addonics Technologies CF DigiAdapter ADIDECF user guide

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Addonics Technologies CF DigiAdapter ADIDECF user guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 299 Addonics Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 2
    Add page 1 to Favourites
    image text
    Enable zoom 
    							Technical Support
If you need any assistance to get your unit functioning properly, please have your 
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v4.1.11
PCI Slot Mount
Bay Mount40-Pin IDE Connector
4-Pin Floppy
Power Connector
Eject Button
Master/Slave Setting
CF/MD Slot
40-Pin IDE Connector
4-Pin Floppy
Power Connector
Eject Button
Master/Slave Setting
CF/MD Slot
T E C H N O L O G I E S
User Guide
IDE  CF Adapter
(ADIDECF, ADIDECFB, ADIDECF-N)
    Add page 2 to Favourites
    image text
    Enable zoom 
    							Addonics IDE/CF Converter Board is a converter solution for the IDE port\
 to have 
CF card interface. It has a standard 40 pin or 44-pin IDE port, which ca\
n interface 
to IDE host side and 50-pin Compact Flash socket in device side.
This is a convenient interface that allows Compact Flash modules to be u\
sed in 
any system that has a standard IDE 40 pin or 44-pin connector.
Features
•  40 pin or 44 pin IDE standard Port
•  Simple plug and play, no drivers required
•  OS independent
•  Support Compact Flash TM cards (Type I & II) or IBM Microdrive TM
•  Transparent to the operating system and does not require any drivers
•  The CF card can be the primary booting device containing the OS and  
 application
•  Mount in PCI slot or 3.5” drive bay.
Software Installation:
Step 1
Connect Y-type power cable to this Bridge board and PC Power Supply (Ignore this\
 
step when you use 44pin IDE connection which already have power input)
Step 2
Set jumper on IDE Master mode or Slave mode (J1 ON = Master, J1 OFF = Slave)
Step 3
Connect IDE connector to IDE host port or IDE flat cable
Important: IDE interface cannot support hot swap. When you insert or remove the 
CF card, power off your system.
www.addonics.com
Phone:   408-573-8580
Fax:     408-573-8588
Email:   http://www.addonics.com/sales/query/
CONTACT US
    All Addonics Technologies manuals Comments (0)

    Related Manuals for Addonics Technologies CF DigiAdapter ADIDECF user guide