Home > Addonics Technologies > CD/DVD Duplicator > Addonics Technologies BluRay DVD CD DigiCopier DGBRC3 user guide

Addonics Technologies BluRay DVD CD DigiCopier DGBRC3 user guide

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Addonics Technologies BluRay DVD CD DigiCopier DGBRC3 user guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 299 Addonics Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 2
    Add page 1 to Favourites
    image text
    Enable zoom 
    							Technical Support
If you need any assistance to get your unit functioning properly, please have your 
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v5.1.11
www.addonics.com
LCD Panel
Source TrayDestination Tray
Power Switch
ENT
ESC
T E C H N O L O G I E S
User Guide
1:3 Blu-Ray/DVD DigiCopier (DGBRC3)
    Add page 2 to Favourites
    image text
    Enable zoom 
    							I.  DigiCopier III Overview
There are four buttons and an LCD on the panel of DigiCopier III.
1 – LCD shows a function or a message.
2 – it is used to scroll up function menus.
3 – it is used to scroll down function menus.
4 – it is used to execute a function.
5 – it is used to cancel a function.
 
II.  Connecting the power cable and turning on the DigiCopier III
  a.  Connect the power cord provided from the wall outlet to the back of the \
   
  DigiCopier III.
  b.  A main power switch is located at the back of the tower. Turn the switch on. Another  
    auxiliary power switch is located on the front of the tower.
III.  Steps for the Copying Process  
  Note: may not able to copy-protected Blu-ray, DVD or CD.
   Step 1  Turn on the DigiCopier III by pressing the auxiliary power switch.
   Step 2  Insert media you wish to duplicate into the source tray on the top. 
   Step 3 Populate the destination trays with blank CDs, DVD or Blu-ray  
      media. A rewritable Blu-ray or DVD containing old data can also be use,  
      but the old data will be automatically erased.
Step 4 After the Blu-ray or DVD-ROM and DVD writers detect DVDs, press ENT button to start copying.
LCD will show the copying information as follows.
 
When copying is in progress, MB and time will decrease while the percent\
age of completion will increase. 
“MB” means the size of data that you want to copy.
When copying comes to an end, LCD will show the results as follows. The DVDs that were successfully 
copied will eject automatically.
Copy-DVD         0%
4213.4MB         7:30
Copy
OK: 07
ENT
ESC
Duplicator Panel
1
2
3 4
5
ENT
ESC
ENT
ESC
    All Addonics Technologies manuals Comments (0)

    Related Manuals for Addonics Technologies BluRay DVD CD DigiCopier DGBRC3 user guide