Home > Addonics Technologies > CD/DVD Duplicator > Addonics Technologies BluRay DVD CD DigiCopier DGBRC1 user guide

Addonics Technologies BluRay DVD CD DigiCopier DGBRC1 user guide

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Addonics Technologies BluRay DVD CD DigiCopier DGBRC1 user guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 299 Addonics Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 2
    Add page 1 to Favourites
    image text
    Enable zoom 
    							Technical Support
If you need any assistance to get your unit functioning properly, please have your 
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v5.1.11
LCD Panel
Source Tray
Destination Tray
Power Switch
ENT
ESC
T E C H N O L O G I E S
www.addonics.com
User Guide
1:1 Blu-Ray/DVD DigiCopier (DGBRC1)
    Add page 2 to Favourites
    image text
    Enable zoom 
    							I.  DigiCopier I Overview
There are four buttons and an LCD on the panel of HDD Duplicator.
1 – LCD shows a function or a message.
2 – it is used to scroll up function menus.
3 – it is used to scroll down function menus.
4 – it is used to execute a function.
5 – it is used to cancel a function.
 
II.  Connecting the power cable and turning on the DigiCopier I
  a.  Connect the power cord provided from the wall outlet to the back of the \
DigiCopier I
  b.  The power switch is located on the front of the tower.
III.  Steps for the Copying Process  
  Note: may not able to copy-protected Blu-ray, DVD or CD.
   Step 1  Turn on the DigiCopier I by pressing the power switch.
   Step 2  Insert media you wish to duplicate into the source tray on the top.
   Step 3 Populate the destination trays with blank CDs, DVD or Blu-ray  
      media. A rewritable Blu-ray or DVD containing old data can also be use,  
      but the old data will be automatically erased.
Step 4 After the Blu-ray or DVD-ROM and DVD writers detect DVDs, press ENT to start copying.
LCD will show the copying information as follows.
 
When copying is in progress, MB and time will decrease while the percentage of completion will increase. 
“MB” means the size of data that you want to copy.
When copying comes to an end, LCD will show the results as follows. The DVDs that were successfully 
copied will eject automatically.
Copy-DVD         0%
4213.4MB         7:30
Copy
OK: 07
ENT
ESC
Duplicator Panel
1
2
3 4
5
ENT
ESC
ENT
ESC
    All Addonics Technologies manuals Comments (0)

    Related Manuals for Addonics Technologies BluRay DVD CD DigiCopier DGBRC1 user guide