Addonics Technologies 6G RAID Tower RTMPM6G User Manual
Have a look at the manual Addonics Technologies 6G RAID Tower RTMPM6G User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 299 Addonics Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
www.addonics.com (RTMPM6G) Technical Support If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at: Hours: 8:30 am - 6:00 pm PST Phone: 408-453-6212 Email: http://www.addonics.com/support/query/
Overview 1www.addonics.com Technical Support (M-F 8:30 am – 6:00 pm) Drive LEDs: 0 1 2 3 Power Button Power LEDVoltage Select Power ConnectoreSATA Connector Chassis Screws (3) Mounting Holes Mounting Rails Drive Door Drive 1 Drive 2 Drive 0 Drive 3Port Multiplier (installed) WARNING: Please remember to set the power supply to your local outlet voltage prior to plugging in the power cord. Failure to do so may damage the power supply. Power Cord (US Version Shown)
Drive Installation
1. Remove the three chassis screws from the back of the unit and remove the outer cover.
2. Open the Drive Door up to four 3.5” hard drives or enclosures, connect each one to the power supply
and a SATA cable from the port multiplier. Refer to the Port Multiplier diagram in the Overview section.
3. Secure each drive to the chassis.
4. Close the Drive Door and replace the outer cover.
Port Multiplier Compatibility
The Port Multiplier in this unit will only work with a Port Multiplier aware SATA host adapter. Identify your host
controller and check with its hardware manufacturer if you are unsure. Addonics offers several Port Multiplier
aware host adapters.
Hot Swapping
This unit supports hot swapping (inserting or removing drives while the drives are running and connected to a
computer). The eSATA controller on the computer must also support hot swapping - be sure to confirm this
before attempting to insert or remove drives while the system is running. Also be sure to practice the
appropriate safe removal procedure before proceeding. Failure to practice safe removal procedures will
result in loss or corruption of data.
Phone: 408-453-6212 Email: www.addonics.com/support/query/
2
Contact Us www.addonics.com Phone: 408-573-8580 Fax: 408-573-8588 Email: http://www.addonics.com/sales/query/