Addonics Technologies 6G RAID Tower RT93SNE6G User Manual

							www.addonics.com
RAID Tower IX With 6G PM 
(RT93SNE6G) 
Technical Support
If you need any assistance to get your unit functioning properly, please have
your product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/ 
						

							Overview
Drive LED (one for each drive): Glows blue to indicate power, flashes magenta to indicate activity.
Array Host LED: Glows to indicate host is connected, flashes to indicate activity.
1www.addonics.com
Technical Support (M-F 8:30 am – 6:00 pm)
Chassis 
Cooling Fans
 Array 2 eSATA
Power Supply 
(Includes Fan, Power 
Connector, AC  Power 
Switch, AC  Input 
Select Switch)
WARNING: Please remember to
set the power supply to your local
outlet voltage prior to plugging in
the power cord. Failure to do so
may damage the power supply.
Mini SAS (SFF-8088) Cable
Power Cord
 Array 1 eSATA
 Array 3 eSATA 
						

							Drive Installation
1. Be sure all doors are unlocked, use the provided keys to unlock if needed.
2. Gently pull the lever on the door to release it.
3. Insert the drive as shown on the label inside the door: The SATA connector toward the rear, with label side
to the right. The drive should slide in easily, dont force it.
4. Close the door on the drive bay. It should also give little resistance, dont force it. It can help to slightly tug
the lever while snapping the door shut to make it easier. As soon as the drive is in position it will power up.
5. The drives may be locked in place if desired.
Hot Swapping
This unit supports hot swapping (inserting or removing drives while the drives are running and connected to a
computer). The controller on the computer must also support hot swapping - be sure to confirm this before
attempting to  insert  or  remove drives  while the  system  is  running.  Also  be  sure to practice the appropriate
safe removal procedure before proceeding. Failure to practice safe removal procedures will result in loss or
corruption of data.
Port Multiplier Compatibility
The Port Multiplier in this unit will only work with a Port Multiplier aware SATA host adapter. Identify your host
controller and check with its hardware manufacturer if you are unsure. Addonics offers several Port Multiplier
aware host adapters.
Phone: 408-453-6212 Email: www.addonics.com/support/query/
    2 
						

							Contact Us
www.addonics.com
Phone: 408-573-8580
Fax: 408-573-8588
Email: http://www.addonics.com/sales/query/