Home
>
Addonics Technologies
>
Raid Tower
>
Addonics Technologies 4U RAID Rack RR2035ASDML User Manual
Addonics Technologies 4U RAID Rack RR2035ASDML User Manual
Have a look at the manual Addonics Technologies 4U RAID Rack RR2035ASDML User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 299 Addonics Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 3
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
RAID Rack with Port Multiplier Compatibility
Note: When configured as a set of individual drives, the Port Multiplier\
will
only work with a Port Multiplier aware host. Identify your host controll\
er and
check with its hardware manufacturer if you are unsure. Addonics offers
several Port Multiplier capable host adapters. Power Switch: This is the switch to power devices...](http://img.usermanuals.tech/thumb/181/2436/w64_4u-raid-rack-rr2035asdml-1478565301_d-2.png "Page 3
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
RAID Rack with Port Multiplier Compatibility
Note: When configured as a set of individual drives, the Port Multiplier\
will
only work with a Port Multiplier aware host. Identify your host controll\
er and
check with its hardware manufacturer if you are unsure. Addonics offers
several Port Multiplier capable host adapters. Power Switch: This is the switch to power devices...")
![Page 4
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
1. Be sure the lock on each drive door is in an unlock position. If not,\
use the key
that comes with the Disk Array to unlock the drive door. Pull on the door lever to
swing open the drive door all the way.
2. Slide a 3.5” SATA hard drive into the drive slot with the drive connector side
facing in. Be sure to orient the hard drive correctly as shown in th\
e yellow...](http://img.usermanuals.tech/thumb/181/2436/w64_4u-raid-rack-rr2035asdml-1478565301_d-3.png "Page 4
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
1. Be sure the lock on each drive door is in an unlock position. If not,\
use the key
that comes with the Disk Array to unlock the drive door. Pull on the door lever to
swing open the drive door all the way.
2. Slide a 3.5” SATA hard drive into the drive slot with the drive connector side
facing in. Be sure to orient the hard drive correctly as shown in th\
e yellow...")
![Page 8
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
BZS Switch (SW1:1):
The BZ switch is used to silence the audible alarm buzzer. The OFF position
permits the audible alarm, and the ON position silences the audible alar\
m.
The BZ switch has immediate effect.
EZ Switch (SW1:2):
The EZ (spare) switch inhibits spares when ON. When in the OFF positio\
n,
all individual drives (not defined as members of an array) are conside\
red...](http://img.usermanuals.tech/thumb/181/2436/w64_4u-raid-rack-rr2035asdml-1478565301_d-7.png "Page 8
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
BZS Switch (SW1:1):
The BZ switch is used to silence the audible alarm buzzer. The OFF position
permits the audible alarm, and the ON position silences the audible alar\
m.
The BZ switch has immediate effect.
EZ Switch (SW1:2):
The EZ (spare) switch inhibits spares when ON. When in the OFF positio\
n,
all individual drives (not defined as members of an array) are conside\
red...")
![Page 10
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
RAID 3 (Stripe set with dedicated parity)
Number of drives: at least 3
Unit capacity: size of one member times number of members minus one.
Spares: yes
Fault tolerance: can withstand the loss of one drive without losing data\
.
RAID 3 works by striping data for individual I/O blocks across all membe\
rs
except one, which contains parity data for the stripe set computed by th\
e...](http://img.usermanuals.tech/thumb/181/2436/w64_4u-raid-rack-rr2035asdml-1478565301_d-9.png "Page 10
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
RAID 3 (Stripe set with dedicated parity)
Number of drives: at least 3
Unit capacity: size of one member times number of members minus one.
Spares: yes
Fault tolerance: can withstand the loss of one drive without losing data\
.
RAID 3 works by striping data for individual I/O blocks across all membe\
rs
except one, which contains parity data for the stripe set computed by th\
e...")
![Page 11
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Notes about Spare Drives
If EZ mode is disabled (SW1:2 ON), all individual drives not configure\
d as
array members will be offered to the host adapter as separate units.
To create an array with one or more spares, set or modify the RAID mode
using fewer than 5 members, while the spares are disconnected from the
Port Multiplier. When EZ mode is enabled, individual drives connected...](http://img.usermanuals.tech/thumb/181/2436/w64_4u-raid-rack-rr2035asdml-1478565301_d-10.png "Page 11
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Notes about Spare Drives
If EZ mode is disabled (SW1:2 ON), all individual drives not configure\
d as
array members will be offered to the host adapter as separate units.
To create an array with one or more spares, set or modify the RAID mode
using fewer than 5 members, while the spares are disconnected from the
Port Multiplier. When EZ mode is enabled, individual drives connected...")
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ Notes about Spare Drives If EZ mode is disabled (SW1:2 ON), all individual drives not configure\ d as array members will be offered to the host adapter as separate units. To create an array with one or more spares, set or modify the RAID mode using fewer than 5 members, while the spares are disconnected from the Port Multiplier. When EZ mode is enabled, individual drives connected when an array is present are considered spare. Spare drives must be equal to or larger in size than the smallest member\ . When any type of array is defined, individual units will be considered s\ pare. RAID 0 and LARGE arrays are not fault-tolerant and spare drives will not\ be useful; therefore, disabling EZ for these arrays is recommended. When a spare drive is present and a fault-tolerant RAID (1, 10, 3, or 5\ ) is defined, EZ mode will automatically rebuild any available spares into th\ e array.
www.addonics.com Phone: 408-573-8580 Fax: 408-573-8588 Email: http://www.addonics.com/sales/query/ CONTACT US