Home
>
Addonics Technologies
>
Raid Tower
>
Addonics Technologies 1U RAID Rack R14HPCCES User Manual
Addonics Technologies 1U RAID Rack R14HPCCES User Manual
View the Addonics Technologies 1U RAID Rack R14HPCCES User Manual for free. All the Addonics Technologies manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.
![Page 3
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Cipher Chain Module
The Cipher hardware in the R14CCES is activated by either powering up th\
e
unit or pressing the Cipher Reset button with the Cipher Key inserted. Withou\
t
activating the Cipher hardware, no drives in the Raid Rack will be visib\
le to the
computer. Once the Cipher hardware is activated, the amber Cipher LED will
glow and the drives will be available, and the...](http://img.usermanuals.tech/thumb/181/2430/w300_1u-raid-rack-r14hpcces-1478564941_d-2.png "Page 3
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Cipher Chain Module
The Cipher hardware in the R14CCES is activated by either powering up th\
e
unit or pressing the Cipher Reset button with the Cipher Key inserted. Withou\
t
activating the Cipher hardware, no drives in the Raid Rack will be visib\
le to the
computer. Once the Cipher hardware is activated, the amber Cipher LED will
glow and the drives will be available, and the...")
![Page 4
Installation (RAID)
The Cipher hardware prevents the use of software to configure or manage \
the
Port Multiplier. Configuring a RAID mode must be done using the dipswitches
and SET button on the port multiplier itself, located inside the unit at the re\
ar of
the chassis.
Installation
1. Use the provided key to unlock the front door if needed and open it.
2. Insert a drive into each bay as desired, SATA connectors first, label side up
as shown, then press the drive firmly into place.
3. Connect the...](http://img.usermanuals.tech/thumb/181/2430/w300_1u-raid-rack-r14hpcces-1478564941_d-3.png "Page 4
Installation (RAID)
The Cipher hardware prevents the use of software to configure or manage \
the
Port Multiplier. Configuring a RAID mode must be done using the dipswitches
and SET button on the port multiplier itself, located inside the unit at the re\
ar of
the chassis.
Installation
1. Use the provided key to unlock the front door if needed and open it.
2. Insert a drive into each bay as desired, SATA connectors first, label side up
as shown, then press the drive firmly into place.
3. Connect the...")