ADDERView 4 PRO DisplayPort Manual
Here you can view all the pages of manual ADDERView 4 PRO DisplayPort Manual. The ADDER manuals for Extender are available online for free. You can easily download all the documents as PDF.
Page 21
![Page 21
20
To lock access to the computers
When privacy is required, you can lock access to the connected computers\
via
the unit.
To lock the unit
1 Simultaneously press and hold and (or other hotkeys, if altered).
2 While still holding and , press .
The display will show (providing a valid password has been previously set).
You will not be able to access any computers until the password is corre\
ctly
entered.
To unlock the unit
• When...](http://img.usermanuals.tech/thumb/176/2311/w300_adderview-4-pro-displayport-manual-1478558161_d-20.png "Page 21
20
To lock access to the computers
When privacy is required, you can lock access to the connected computers\
via
the unit.
To lock the unit
1 Simultaneously press and hold and (or other hotkeys, if altered).
2 While still holding and , press .
The display will show (providing a valid password has been previously set).
You will not be able to access any computers until the password is corre\
ctly
entered.
To unlock the unit
• When...")
20 To lock access to the computers When privacy is required, you can lock access to the connected computers\ via the unit. To lock the unit 1 Simultaneously press and hold and (or other hotkeys, if altered). 2 While still holding and , press . The display will show (providing a valid password has been previously set). You will not be able to access any computers until the password is corre\ ctly entered. To unlock the unit • When...
Page 22
![Page 22
21
Autoscanning
When enabled, the autoscan mode switches between the connected computers\
in sequence. This is useful to allow you to sample activity among the co\
nnected
computers.
Two scanning modes are available:
• Cycle all ports – This mode visits, in turn, to each connected computer. This
mode should be used with care due to the reasons given in the warning
below. To prepare for this autoscan mode, choose within the...](http://img.usermanuals.tech/thumb/176/2311/w300_adderview-4-pro-displayport-manual-1478558161_d-21.png "Page 22
21
Autoscanning
When enabled, the autoscan mode switches between the connected computers\
in sequence. This is useful to allow you to sample activity among the co\
nnected
computers.
Two scanning modes are available:
• Cycle all ports – This mode visits, in turn, to each connected computer. This
mode should be used with care due to the reasons given in the warning
below. To prepare for this autoscan mode, choose within the...")
21 Autoscanning When enabled, the autoscan mode switches between the connected computers\ in sequence. This is useful to allow you to sample activity among the co\ nnected computers. Two scanning modes are available: • Cycle all ports – This mode visits, in turn, to each connected computer. This mode should be used with care due to the reasons given in the warning below. To prepare for this autoscan mode, choose within the...
Page 23
![Page 23
22
Further information
This chapter contains a variety of information, including the following:\
• Getting assistance - see right
• Appendix 1 – Cable pin-outs
• Safety information
• Warranty
• Radio frequency energy statements
Getting assistance
If you are still experiencing problems after checking the information co\
ntained
within this guide, then we provide a number of other solutions:
• Online solutions and updates –...](http://img.usermanuals.tech/thumb/176/2311/w300_adderview-4-pro-displayport-manual-1478558161_d-22.png "Page 23
22
Further information
This chapter contains a variety of information, including the following:\
• Getting assistance - see right
• Appendix 1 – Cable pin-outs
• Safety information
• Warranty
• Radio frequency energy statements
Getting assistance
If you are still experiencing problems after checking the information co\
ntained
within this guide, then we provide a number of other solutions:
• Online solutions and updates –...")
22 Further information This chapter contains a variety of information, including the following:\ • Getting assistance - see right • Appendix 1 – Cable pin-outs • Safety information • Warranty • Radio frequency energy statements Getting assistance If you are still experiencing problems after checking the information co\ ntained within this guide, then we provide a number of other solutions: • Online solutions and updates –...
Page 24
![Page 24
23
63TXDRXD
22GNDGND
Appendix 1 – Cable pin-outs
The OPTIONS port uses a 10p10c socket which can accommodate both 10p10c \
connectors as well as the much more common 8p8c connectors, which are us\
ed
on Ethernet leads and patch cables. The pin-outs are listed in this sect\
ion for
both types of connector.
Serial remote control and flash upgrade cable (8p8c)
8p8c connectorD-Type female 9 way
Multi-head synchronisation cable (8p8c)
MASTER...](http://img.usermanuals.tech/thumb/176/2311/w300_adderview-4-pro-displayport-manual-1478558161_d-23.png "Page 24
23
63TXDRXD
22GNDGND
Appendix 1 – Cable pin-outs
The OPTIONS port uses a 10p10c socket which can accommodate both 10p10c \
connectors as well as the much more common 8p8c connectors, which are us\
ed
on Ethernet leads and patch cables. The pin-outs are listed in this sect\
ion for
both types of connector.
Serial remote control and flash upgrade cable (8p8c)
8p8c connectorD-Type female 9 way
Multi-head synchronisation cable (8p8c)
MASTER...")
23 63TXDRXD 22GNDGND Appendix 1 – Cable pin-outs The OPTIONS port uses a 10p10c socket which can accommodate both 10p10c \ connectors as well as the much more common 8p8c connectors, which are us\ ed on Ethernet leads and patch cables. The pin-outs are listed in this sect\ ion for both types of connector. Serial remote control and flash upgrade cable (8p8c) 8p8c connectorD-Type female 9 way Multi-head synchronisation cable (8p8c) MASTER...
Page 25
![Page 25
24
Safety information
• For use in dry, oil free indoor environments only.
• Both the AV4PRO-DP unit and its power supply generate heat when in
operation and will become warm to the touch. Do not enclose them or
place them locations where air cannot circulate to cool the equipment. D\
o
not operate the equipment in ambient temperatures exceeding 40 degrees
Centigrade. Do not place the products in contact with equipment whose
surface...](http://img.usermanuals.tech/thumb/176/2311/w300_adderview-4-pro-displayport-manual-1478558161_d-24.png "Page 25
24
Safety information
• For use in dry, oil free indoor environments only.
• Both the AV4PRO-DP unit and its power supply generate heat when in
operation and will become warm to the touch. Do not enclose them or
place them locations where air cannot circulate to cool the equipment. D\
o
not operate the equipment in ambient temperatures exceeding 40 degrees
Centigrade. Do not place the products in contact with equipment whose
surface...")
24 Safety information • For use in dry, oil free indoor environments only. • Both the AV4PRO-DP unit and its power supply generate heat when in operation and will become warm to the touch. Do not enclose them or place them locations where air cannot circulate to cool the equipment. D\ o not operate the equipment in ambient temperatures exceeding 40 degrees Centigrade. Do not place the products in contact with equipment whose surface...
Page 26
![Page 26
25
Radio Frequency Energy
All interface cables used with this equipment must be shielded in order \
to
maintain compliance with radio frequency energy emission regulations and\
ensure a suitably high level of immunity to electromagnetic disturbances\
.
European EMC directive 2004/108/EC
This equipment has been tested and found to comply with
the limits for a class A computing device in accordance with
the specifications in the European...](http://img.usermanuals.tech/thumb/176/2311/w300_adderview-4-pro-displayport-manual-1478558161_d-25.png "Page 26
25
Radio Frequency Energy
All interface cables used with this equipment must be shielded in order \
to
maintain compliance with radio frequency energy emission regulations and\
ensure a suitably high level of immunity to electromagnetic disturbances\
.
European EMC directive 2004/108/EC
This equipment has been tested and found to comply with
the limits for a class A computing device in accordance with
the specifications in the European...")
25 Radio Frequency Energy All interface cables used with this equipment must be shielded in order \ to maintain compliance with radio frequency energy emission regulations and\ ensure a suitably high level of immunity to electromagnetic disturbances\ . European EMC directive 2004/108/EC This equipment has been tested and found to comply with the limits for a class A computing device in accordance with the specifications in the European...
Page 27
26 www.ctxd.com Documentation by: © 2012 Adder Technology Limited All trademarks are acknowledged. Part No. MAN-AV4PRO-DP • Release 1.1b Web: www.adder.com Contact: www.adder.com/contact-details Support: forum.adder.com
Page 28
27 HT Index A Assistance 22 Audio connection 7 Autoscanning 21 B Brackets fitting 6 C Cable pin-outs 23 Channel select input lines 10 Channel selection codes 10 Computer connection 8 ports 4 selecting 17 Configuration 12 Connections 7 computer system 8 multiple video heads 11 user console 7 E Emulated switching 3 Enumerated switching 3 External control 10 F Firmware upgrade 15 Front panel switching 17 H Host computer...