ADDERLink X100 Manual Rx

Adder	X00	Receiver
User.Guide
contents
REMOTE
ADDER
®
T OL O C AL
P OW E R  

welcome
contents
installation
 
& operation
special
 
configuration
furter
information

Contents
Welcome
Introduction.........................................................................\
.........2
Installation & Operation
Connections.........................................................................\
.........4
Cable.length.advice
.................................................................4
Connections.at.the.X100.receiver
...........................................5...

welcome
contents
installation
 
& operation
special
 
configuration
furter
information

Welcome
Introduction
Thank you for choosing the Adder X100 receiver. 
This compact module can be used in conjunction 
with other Adder products, such as the AdderView 
CATx, an Adder CAM (Computer Access Module) or 
other industry leading products. In close harmony 
with the other Adder device which remains local to 
the host computer, the X100 receiver allows you 
to place the controlling keyboard, video...

welcome
contents
installation
 
& operation
special
 
configuration
furter
information

Supplied items
CD-ROM
Four	self-adhesive	rubber	feet
Power	adapter	
and	country-	
specific	power	
lead
X00	Module 

welcome
contents
installation 
 
&operation
special
 
configuration
furter
information

Installation & Operation
Connections
X100 receiver modules offer straightforward installation and generally require 
minimal configuration. The local device (AdderVeiw CATx, Adder CAM, etc.)  
connects directly to the computer, while the X100 receiver resides at the other 
end of the twisted pair cable and attaches to the keyboard, mouse, etc.
• 
Connections.at.the.X100.(remote).module
Cable length advice
The...

welcome
contents
installation 
 
&operation
special
 
configuration
furter
information
5
Connections at the X100 receiver
1  Place the X100 receiver adjacent to the remote user location. 
2  Attach the video monitor, keyboard, mouse (and, optionally for X100A 
and X100AS users, speaker) connectors to the sockets of the Adder X100 \
receiver. 3 
Attach the connector of the cable run leading from the local device to the 
 
TO	LOCAL socket of the X100 receiver.
From	mouse
From	keyboard
From	video	monitor...

welcome
contents
installation 
 
&operation
special
 
configuration
furter
information
6
1ON423
1ON
423
ON
Determines	configuration
of	hotkeys	in	conjunction
with	switch	
Reserved	for	
future	use
OFF:	Normal	operation
ON:	Flash	upgrade
Determines	configuration	
of	hotkeys	in	conjunction	
with	switch	
Note: When shipped, all switches are set in the OFF positions and this w\
ill 
produce normal operation.
X100 module switches
Certain aspects of operation can be affected by the switches on the...

welcome
contents
installation 
 
&operation
special
 
configuration
furter
information

Operation
General use
In use, the local device and X100 receiver should be transparent - the system 
and its peripherals should operate exactly as normal, the only difference being 
that they are now 100 metres or more apart. 
In some installations, you may see some ‘shadows’ to the right of \
high contrast 
screen characters. This can be caused by an incorrectly selected sharpness setting 
and it may be...

welcome
contents
installation
 
& operation
special
 
configuration
furter
information

Special configuration
Configuration
You can alter the way that the X100 receiver operates to suit your requirements. 
This is done using the Configuration mode and you can affect the following 
settings: 
• 
Password.setting – allows you to lock the remote module to prevent 
unauthorised system access.
• 
Mouse.restoration.and.settings – allows you to restore mouse operation 
and also to change the mouse type....

welcome
contents
installation
 
& operation
special
 
configuration
furter
information

Password setting
Password protection allows you restrict access to the system only to authorised 
personnel. A password first needs to be set and then, using the keyboard 
attached to the X100 receiver, a simple key sequence allows the system to be 
quickly and securely detached from its peripherals.
To	set	a	password
1  Simultaneously, press the hotkeys (by default, 
 and ) along with  
to enter configuration...