ADDERLink X100 Manual P

welcome
contents
installation
 
& operation
special
 
configuration
furter
information
0
Password setting
Password protection allows you restrict access to the system only to authorised 
personnel. A password first needs to be set and then, using the keyboard 
attached to the remote X100 module, a simple key sequence allows the system 
to be quickly and securely detached from its peripherals.
To	set	a	password
1  Simultaneously, press the hotkeys (by default, 
 and ) along with  
to enter...

welcome
contents
installation
 
& operation
special
 
configuration
furter
information

Hot plugging and mouse restoration
It is strongly recommended that you switch off the computer system before 
attempting to connect it via the X100 modules. However, if this is not possible 
then you need to ‘hot plug’ the X100 modules while power is still \
applied to 
the system. There is not normally a danger of damage to the system, however, 
when mouse communications are interrupted, often they fail...

welcome
contents
installation
 
& operation
special
 
configuration
furter
information

To	apply	remote	user	video	compensation
1  On the keyboard that is connected to the X100 remote module, 
simultaneously, press the hotkeys (by default,  and ) along with  to 
enter configuration mode.
The three keyboard indicators (‘Num Lock’, ‘Caps 
Lock’ and ‘Scroll Lock’) will now begin to flash in 
sequence. The speed of the sequence indicates the 
level of the sharpness adjustment currently applied:...

welcome
contents
installation
 
& operation
special
 
configuration
furter
information

Miscellaneous settings
The following are configuration settings within the modules that are not covered 
in other sections of this guide. These can be achieved once within confi\
guration 
mode by pressing the indicated keys:
Report	X00-series	firmware	version	-	
		
Before initiating this command, ensure that the system is running an application 
that can display typed keys as screen characters - e.g....

welcome
contents
installation
 
& operation
special
 
configuration
furter
information

Performing flash upgrades
The Adder X100 modules and CAMs are fully reconfigurable via flash upgrades 
using the  kVM Firmware Uploader utility. 
during the upgrade you will be required to connect the X100 module directly 
to a computer system using a special cable. The upgrade utility will upd\
ate the 
firmware of the X100 and also temporarily transform it so that it can update th\
e 
CAM unit. Once...

welcome
contents
installation
 
& operation
special
 
configuration
furter
 
information
5
Further information
Getting assistance
•  Adder.Technology.website – www.adder.com
  Check the Support section of our website for the latest solutions and dr\
iver 
files.
• 
Email – [email protected]
• 
Fax   in the Uk:  05	00
    in the US:  +		5	
• 
Phone  in the Uk:  05	00
    in the...

welcome
contents
installation
 
& operation
special
 
configuration
furter
 
information
6
Warranty
Adder Technology Ltd warrants that this product shall be free from defects in 
workmanship and materials for a period of two years from the date of original 
purchase. If the product should fail to operate correctly in normal use during the 
warranty period, Adder will replace or repair it free of charge. No liability can be 
accepted for damage due to misuse or circumstances outside Adder’s...

welcome
contents
installation
 
& operation
special
 
configuration
furter
 
information

Radio Frequency Energy
A Category 5 (or better) twisted pair cable must be used to connect th\
e units in 
order to maintain compliance with radio frequency energy emission regulations 
and ensure a suitably high level of immunity to electromagnetic disturbances.
All other interface cables used with this equipment must be shielded in \
order 
to maintain compliance with radio frequency energy emission...

welcome
contents
installation
 
& operation
special
 
configuration
furter
 
information

© 2006 Adder Technology Limited
All trademarks are acknowledged.
Release 1.0b
december 2006
Part No. Add0067
Adder Technology Limited,
Technology House,
Trafalgar Way, Bar Hill,
Cambridge, CB3 8SQ,
United kingdom
Tel: +44 (0)1954 780044
Fax: +44 (0)1954 780081
Adder Corporation,
29 Water Street,
Newburyport,
MA 01950,
United States of America
Tel: +1-888-932-3337
Fax: +1-888-275-1117
 
www.ctxd.com...