ADDERLink INFINITY dual 2112T Manual v30 2112T

60
INSTALLATION
CONFIGURATION
OPERATION
FURTHERINFORMATION
INDEX
Inputs
Inputs:
When set to ‘Enabled’, all primary options 
below are ticked. The ‘Disabled’ setting 
unticks all of the primary options (causing 
‘view-only mode’ where no control 
data may be sent to the ALIF 2112T. The 
‘Custom’ setting is shown if you choose 
your own combination of options.
Enable keyboard input
Allows keyboard data to be transferred to 
the ALIF  2112T.
Pass special keys directly to server
When ticked, ‘special’ keys...

61
INSTALLATION
CONFIGURATION
OPERATION
FURTHERINFORMATION
INDEX
Connection
The options on this page are not relevant 
to ALIF 2112T connections and should be 
left in their default states.
Expert
The options within this section work 
correctly with ALIF 2112T in their default 
states and should not require alteration 
except in special circumstances.      

62
INSTALLATION
CONFIGURATION
OPERATION
FURTHERINFORMATION
INDEX
APPENDIX H - VNC viewer window options
Click the VNC icon in the top left corner of the viewer window (or press F8) to display 
the window options: 
Standard window control items
Full screen
Expands the VNC viewer window to fill the whole screen with no 
visible window edges or toolbar. Press F8 to re-display this menu.
Single mouse mode (P)
Used for fast network connections where a second, “predictor” 
cursor is not required.
Ctrl, Alt,...

63
INSTALLATION
CONFIGURATION
OPERATION
FURTHERINFORMATION
INDEX
Inputs
View only (ignore mouse & keyboard)
When ticked, the viewer will not send keyboard 
or mouse information to the ALIF 2112T or host 
computer.
Accept clipboard from server
This feature is restricted to software server versions 
of VNC and has no effect on ALIF 2112T installations.
Send clipboard to server
This feature is restricted to software server versions 
of VNC and has no effect on ALIF 2112T installations.
Security
512 bits...

64
INSTALLATION
CONFIGURATION
OPERATION
FURTHERINFORMATION
INDEX
APPENDIX J - The KVMADMIN utility
Particularly useful for complex ALIF 2112T configurations and the control of remote 
installations, KVMADMIN is a powerful administration tool.
KVMADMIN is based upon the established VNC viewer and uses the same security 
system. Rather than a graphical interface such as the standard viewer, KVMADMIN uses 
command line control to provide the following administration facilities:
• Discover and adjust the...

65
INSTALLATION
CONFIGURATION
OPERATION
FURTHERINFORMATION
INDEX
APPENDIX K - Known working video modes
640x480 @ 60Hz
720x480 @ 60Hz
768x576 @ 60Hz
800x480 @ 60Hz
1024x600 @ 60Hz
1024x768 @ 60Hz
1152x768 @ 60Hz
1152x864 @ 60Hz
1280x720 @ 60Hz
1280x768 @ 60Hz
1280x800 @ 60Hz
1280x854 @ 60Hz
1280x960 @ 60Hz
1280x1024 @ 60Hz
1366x768 @ 60Hz
1400x1050 @ 60Hz
1440x900 @ 60Hz
1440x960 @ 60Hz
1600x900 @ 60Hz
1600x1200 @ 60Hz
1680x1050 @ 60Hz
1920x1080 @ 60Hz
1920x1200 @ 60Hz
2048x768 @ 60Hz
2048x1080 @ 60Hz...

66
INSTALLATION
CONFIGURATION
OPERATION
FURTHERINFORMATION
INDEX
APPENDIX L - Hotkey sequences
ALIF 2112T allows you to enter commands suitable for any KVM switch in order to choose 
from up to 128 host systems. These switching commands can take the form of hotkey 
sequences that emulate standard keypress combinations.   
Hotkey sequences
Almost any combination of keypresses can be emulated using the following notations:
+ means press down the key that follows;
–    means release the key that follows
+–...

67
INSTALLATION
CONFIGURATION
OPERATION
FURTHERINFORMATION
INDEX
General specifications
Casing (w x h x d):  198mm (7.92”) x 44mm (1.76”) x 145mm (5.7”)
Construction:    1U compact case, robust metal design 
Weight:     1.11kg (2.44lbs)
Mount kits:    Rack mount - single or dual units per 1U slot.
     VESA monitor / wall mount chassis.
Power to adapter:  100-240VAC 50/60Hz, 0.8A, 
Power to unit:   5VDC 20W
Operating temp:     0ºC to 40ºC (32ºF to 104ºF)
Approvals:    CE, FCC
9pin D-type  female9pin...

68
INSTALLATION
CONFIGURATION
OPERATION
FURTHERINFORMATION
INDEX
APPENDIX N - Fiber modules and cables
To suit your installation layout, two fiber modules are available for the ALIF dual units 
to suit various fiber optic cables. The specifications for all are summarized in the table 
below:   
Fiber TypeFiber sizeFiber Type CodingDistance  
at 
1Gbps
Adder part 
number for 
SFP module
Bar  
color
Conn.  
type
Normal 
Applications
Military 
Applications
Suggested Print 
Nomenclature
OM1(62.5/125)...

69
INSTALLATION
CONFIGURATION
OPERATION
FURTHERINFORMATION
INDEX
WARRANTY
Adder Technology Ltd warrants that this product shall be free from defects in 
workmanship and materials for a period of two years from the date of original purchase. 
If the product should fail to operate correctly in normal use during the warranty period, 
Adder will replace or repair it free of charge. No liability can be accepted for damage due 
to misuse or circumstances outside Adder’s control. Also Adder will not be...