ADDERLink CUSB Extender 20 Quick Start M4a
Have a look at the manual ADDERLink CUSB Extender 20 Quick Start M4a online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 78 ADDER manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 1
The Adder C-USB modules allow you to extend the distance between a USB p\
eripheral and your computer by up to 100 meters.
The local module connects to a vacant USB port on your computer. You the\
n connect your USB 1.1 or 2.0 peripheral to the remote module which is linked via CAT5e, 6 or 7 cablin\
g (not supplied) to the local module. A power adapter is provided to supply either the local or remote module,\
whichever is most convenient.
In operation, the C-USB modules remain transparent to allow...](http://img.usermanuals.tech/thumb/176/2265/w64_adderlink-cusb-extender-20-quick-start-m4a-1478555342_d-0.png "Page 1
The Adder C-USB modules allow you to extend the distance between a USB p\
eripheral and your computer by up to 100 meters.
The local module connects to a vacant USB port on your computer. You the\
n connect your USB 1.1 or 2.0 peripheral to the remote module which is linked via CAT5e, 6 or 7 cablin\
g (not supplied) to the local module. A power adapter is provided to supply either the local or remote module,\
whichever is most convenient.
In operation, the C-USB modules remain transparent to allow...")
![Page 2
Link cable
Use only CAT 5e or better twisted pair cabling to a total length no greater than 100 meters.
Host computer USB connection
Use the supplied USB cable to link the local module to a vacant port on your computer.
Local module
Remote
moduleUSB device connection
Connect the plug of your USB device to the socket on the remote module.
Checking the installation
On the local and remote modules, check that their green indicators are o\
n. The green indicators signify that the modules are powered up;...](http://img.usermanuals.tech/thumb/176/2265/w64_adderlink-cusb-extender-20-quick-start-m4a-1478555342_d-1.png "Page 2
Link cable
Use only CAT 5e or better twisted pair cabling to a total length no greater than 100 meters.
Host computer USB connection
Use the supplied USB cable to link the local module to a vacant port on your computer.
Local module
Remote
moduleUSB device connection
Connect the plug of your USB device to the socket on the remote module.
Checking the installation
On the local and remote modules, check that their green indicators are o\
n. The green indicators signify that the modules are powered up;...")
The Adder C-USB modules allow you to extend the distance between a USB p\ eripheral and your computer by up to 100 meters. The local module connects to a vacant USB port on your computer. You the\ n connect your USB 1.1 or 2.0 peripheral to the remote module which is linked via CAT5e, 6 or 7 cablin\ g (not supplied) to the local module. A power adapter is provided to supply either the local or remote module,\ whichever is most convenient. In operation, the C-USB modules remain transparent to allow your USB per\ ipheral to work as expected. C-USB cable extenders Quick Start Safety information • For use in dry, oil free indoor environments only. • Do not use to link between buildings. • Not suitable for use in hazardous or explosive environments or next to highly flammable materials. • Warning – the power adapter contains live parts. • No user serviceable parts are contained within the modules or the power adapter - do not dismantle. • Do not use the power adapter if the power adapter case becomes damaged, cracked or broken or if you suspect that it is not operating properly. • Replace the power adapter with a manufacturer approved type only. • If you use a power extension cable with the power adapter, make sure the total ampere rating of the devices plugged into the extension cable do not exceed either the cable’s ampere rating or that of the wall outlet. • Ensure that all twisted pair interconnect cables are installed in compliance with all applicable wiring regulations. • Do not connect the CATx link interface (RJ45 style connector) to any other equipment, particularly network or telecommunications equipment. • Where possible, avoid laying the twisted pair link cable(s) alongside power cables. • The modules do not provide ground isolation and should not be used for any applications that require ground isolation or galvanic isolation. Warranty Adder Technology Ltd warrants that this product shall be free from defects in workmanship and materials for a period of two years from the date of original purchase. If the product should fail to operate correctly in normal use during the warranty period, Adder will replace or repair it free of charge. No liability can be accepted for damage due to misuse or circumstances outside Adder’s control. Also Adder will not be responsible for any loss, damage or injury arising directly or indirectly from the use of this product. Adder’s total liability under the terms of this warranty shall in all circumstances be limited to the replacement value of this product. If any difficulty is experienced in the installation or use of this product that you are unable to resolve, please contact your supplier. Local Module Supplied items Remote Module Power adapter and power cord © 2013 Adder Technology Limited • All trademarks are acknowledged. Part No. MAN-CUSBEXT100-QS-ADDER • Release 2.0a Web: www.adder.com Contact: www.adder.com/contact-details Support: forum.adder.com USB link cable Green indicator CUSBEXT100 Mounting slots for use with cable ties
Link cable Use only CAT 5e or better twisted pair cabling to a total length no greater than 100 meters. Host computer USB connection Use the supplied USB cable to link the local module to a vacant port on your computer. Local module Remote moduleUSB device connection Connect the plug of your USB device to the socket on the remote module. Checking the installation On the local and remote modules, check that their green indicators are o\ n. The green indicators signify that the modules are powered up; have a USB connection to your system and are joined by a suitable link cable. If the green indicators are not on, check the three key items mentioned above. If the green indicators are flashing, either the link cable is faulty or there may be a mismatch between the firmware held within the modules. Contact Adder technical support for assistance. Power adapter Once connected to one of the modules, use the supplied power cord to join the power adapter with the nearest wall outlet. Connect the power adapter to the power jack on either module. Note Never connect power adapters to the local and remote modules simultaneously as this may cause permanent damage to one or both modules.