Home > ADDER > Extender > ADDER CCP2U Manual

ADDER CCP2U Manual

    Download as PDF Print this page Share this page

    Have a look at the manual ADDER CCP2U Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 78 ADDER manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Your CCP2U converter package
    In addition to this brief guide, your package should contain the converter cable:
    Adder Technology Limited,
    Technology House,
    Trafalgar Way,
    Cambridge, CB3 8SQ,
    United Kingdom
    Tel: +44 (0)1954 780044
    Fax: +44 (0)1954 780081
    CCP2U Converter
    User Guide
    Email: [email protected]
    Web: www.adder.com 
    © 2006 Adder Technology Limited • Release 1.0a • Part No. ADD0063 All trademarks are acknowledged.
    Adder Corporation,
    29 Water Street,
    Newburyport,
    MA 01950,
    United States of America
    Tel: +1-888-932-3337 
    Fax: +1-888-275-1117
    USB connector
    Mouse connector
    Circuitry shellThis moulding contains all of the signal conver-sion circuitry  
    Your warranty
    Adder Technology Ltd warrants that this product shall be free from defects in workmanship and 
    materials for a period of two years from the date of original purchase. If the product should fail to 
    operate correctly in normal use during the warranty period, Adder will replace or repair it free of 
    charge. No liability can be accepted for damage due to misuse or circumstances outside Adder’s 
    control. Also, Adder will not be responsible for any loss, damage or injury arising directly or indi-
    rectly from the use of this product. Adder’s total liability under the terms of this warranty shall in 
    all circumstances be limited to the replacement value of this product.
    Regulatory information
    European EMC directive 89/336/EEC
    This equipment has been tested and found to comply with the limits for a class B com-
    puting device in accordance with the specifications in the European standard EN55022. 
    These limits are designed to provide reasonable protection against harmful interference. 
    This equipment generates, uses and can radiate radio frequency energy and if not installed and 
    used in accordance with the instructions may cause harmful interference to radio or television 
    reception. However, there is no guarantee that harmful interference will not occur in a particu-
    lar installation. If this equipment does cause interference to radio or television reception, which 
    can be determined by turning the equipment on and off, the user is encouraged to correct the 
    interference with one or more of the following measures: (a) Reorient or relocate the receiving 
    antenna. (b) Increase the separation between the equipment and the receiver. (c) Connect the 
    equipment to an outlet on a circuit different from that to which the receiver is connected. (d) 
    Consult the supplier or an experienced radio/TV technician for help.
    FCC statement
    This equipment generates, uses and can radiate radio frequency energy and if not installed 
    and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause 
    interference to radio communications. It has been tested and found to comply with the limits for 
    a Class A computing device in accordance with the specifications in Subpart J of part 15 of FCC 
    rules, which are designed to provide reasonable protection such interference when the equipment 
    is operated in a commercial environment. Operation of this equipment in a residential area may 
    cause interference, in which case the user at his own expense will be required to take whatever 
    measures may be necessary to correct the interference. Changes or modifications not expressly 
    approved by the manufacturer could void the user’s authority to operate the equipment.
    Keyboard connector 
    						
    							Connecting your CCP2U converter
    Your CCP2U converter adapts traditional PS/2-style keyboard and mouse connections for use with 
    a USB port. 
    Connector/port icons & colours
    Keyboard                                          Purple
    Mouse                            or             Mid green
    USB                                                       Black
    Important information
    •  For use in dry, oil free indoor environments only. 
    •  Your CCP2U converter contains no user-serviceable parts. 
    •  For connection only to the following standard computer system and KVM switch connectors: PS/2-
    style keyboard, PS/2-style mouse and USB ports.
    Software upgrades and keyboard emulations
    The software within your CCP2U converter can emulate keyboards for various computers without 
    modification. When used in conjunction with Adder MP-type KVM switches it can support PC, 
    Apple and Sun systems as standard. When used in conjunction with other Adder or non-Adder 
    switches, your CCP2U converter supports PC and Apple systems as standard and Sun systems by 
    means of downloading a Sun driver into the cable. 
    The Sun driver as well as other specialist keyboard emulators and general software upgrades are 
    available within the Support section of the Adder Technology website - www.adder.com. Full 
    instructions for performing an upgrade/keyboard emulation are included with the files from the 
    website.
    Keypress equivalents
    The tables below provide equivalent keypresses on a standard PC (PS/2-style) keyboard that emu-
    late special keys found on Apple®, Microsoft® or Sun® keyboards.  
    3  At the other end of the CCP2U 
    converter, attach the USB connec-
    tor to a vacant USB socket on your 
    computer.
    4  Switch on your computer(s) and 
    KVM switch (if used), and operate 
    in the usual manner.
        Your CCP2U converter emulates 
    the presence of a keyboard and 
    mouse (via the USB connector) 
    to the computer at all times. This 
    means that when used with a KVM 
    switch, there will be no delay in 
    response when switching to this 
    channel.   
    Mouse connector
    USB-equipped computer
    USB connector
    To connect your CCP2U converter 
    1  If possible, switch off your 
    computer and/or KVM switch.
    2  Attach the keyboard and mouse 
    connectors to the two sockets of 
    the CCP2U converter. The sockets 
    are colour coded and also show 
    the keyboard and mouse icons.
    * Certain PS/2 keyboards have a power key which will be mapped to perform the same function for a Sun system. 
    PS/2 keyboard                Apple keyboard
    Left Ctrl                                 Left Control
    Left Win Start ()                Left Command ()
    Left Alt                                  Left Option (alt)
    Right Alt or Alt Graph            Right Option (alt)
    Right Win Start ()              Right Command ()
    Right Ctrl                               Right Control
    Windows Application key      No equivalent
    No equivalent                        On / off key
    PS/2 keyboard        Sun keyboard
    Right-[Ctrl] [F1]              Stop
    Right-[Ctrl] [F2]              Again
    Right-[Ctrl] [F3]              Props
    Right-[Ctrl] [F4]              Undo
    Right-[Ctrl] [F5]              Front
    Right-[Ctrl] [F6]              Copy
    Right-[Ctrl] [F7]              Open
    Right-[Ctrl] [F8]              Paste
    Right-[Ctrl] [F9]              Find
    Right-[Ctrl] [F10]            Cut
    Right-[Ctrl] [1]                Mute
    Right-[Ctrl] [2]                Volume -
    Right-[Ctrl] [3]                Volume +
    Right-[Ctrl] [4]                Power*
    Right-[Ctrl] [H]               Help
    When used with Sun® workstations, your CCP2U 
    converter needs to report a keyboard country 
    code to the host computer. Further details about 
    this feature are provided in the upgrade notes 
    available from www.adder.com.
    Keyboard connector 
    						
    All ADDER manuals Comments (0)

    Related Manuals for ADDER CCP2U Manual