Adapt Projector Adpp 101 Quick Manual

							
EN

Projector parts
Focus switch
Speaker
Strap holder
USB connector
Tripod socket
Lens
Battery cover
SD/MMC card slot
Speaker
AV jack
Left button
Right button
Menu button
Power button
Up button
Down button
OK button
Power/Charging LED
* Please refer to the E-manual for more detailed information. 
						

							


1. Slide the battery cover open.
2.  Place the included Li-Ion battery 
into the compartment. Note that the metallic contacts must be aligned with the contacts in the compartment.
3.  After the battery is properly installed, 
replace the battery cover.
Please charge the battery at least 3 hours prior to its first use.
1.  Connect the cable. Connect one end of the supplied AC adapter to the USB port of the projector and the other end to a wall outlet. OR Connect one end of the supplied USB cable to the USB port of the projector and the other end to a powered PC. Make sure the projector is powered off.
2.  The charging LED turns orange and the charge starts.
3.  When the charging is interrupted or the battery pack is fully 
charged, the charging LED will turn green.
Charging the battery
Introduction to main menu
After turn on the projector, you will see “Welcome” screen first then main menu as below.
Settings: This function allows users to set some preference settings such as                  Language, Brightness, Contrast, Saturation, Slideshow Speed,                  Auto power off and Beep sound.  
Video: This function allows users to select video file to project from screen.  
Photo: This function allows users to select JPEG image file to project from screen.  
Music: This function allows users to select MP3 files to play from the projector.  
Memory: This function allows users to check the available memory type and                 capacity and select it for target source for projection. \
●
●
●
●
●
Installing the battery 
						

							
EN


When giving a presentation using PowerPoint/PDF documents, please save the PPT/PDF file into .jpeg format.  
1. Execute PowerPoint/Acrobat program first.2. Open the PPT/PDF file.3. Launch “File” > “Save as” dialogue, then select “JPEG File Exchange Format” from “Save as type” drop-down list.4. Rename the file if necessary:  The playback sequence is in the order of the first digit Arabic numerals, such as 1, 10, 100, 101, 11, then 2, 20, 21, and so on. To avoid playback order confusion, please rename the file 1 ~ 9 as 01 ~ 09, 100 as A100, etc. 
Playing back Powerpoint/PDF files
The default setting is to play selected video, still picture or music once. If users want to repeat the video, still picture or music (s), please do the following:
1.  During the playing back of video, photo, or music, press 
Menu button for 2 seconds to show the function bar on the screen bottom. 
2.  Use the
 Up/Down button to select , , or .
 (default setting): No repeat play 
 : Play the video, still picture or music (s) in the same folder
 : Play the video, still picture or music (s) in the memory card or internal built-in memory.
Repeat playing video, still picture or music   
						

							

Playing back files in other devices
 Connecting the projector to your media players
Steps of connecting projector with external player:
Before connecting your media player to projector, you need to have media player dedicated composite AV-out cable and projector AV cable ready.
1. Connect Composite AV-out cable to media player.2. Connect both AV cables (Yellow to Yellow, white to white and red to red).3. Select “AV in” when you are asked to select “AV in” or “Audio out”.4. Now you can project image and audio from projector. You also can control the volume from control panel (Up/Down button).
Video/Music Player
Mobile Phone
Portable 
Digital AV OUT

(red)
(yellow)
(white)
(red)
(yellow)
(white)
Projector AV cableComposite AV-out cable
Please follow the procedures below to manage files in either built-in memory or memory card. 
1. Make sure the projector is powered off if the battery is installed.  2. Connect one end of the bundled USB cable to the USB port of the proje\
ctor and the other end to a powered PC.  3. Turn on the projector: Press and hold down the Power button for 4 seconds till you hear music. 4. A removable disk will appear in your computer. 
             
Managing the files in built-in memory or 
memory card from PC