Adams Amplifier S6X User Manual

							S6X
Operation Manual / BedienungsanleitungEnglish / Deutsch
S6X 
						

							2
Please read the following safety instructions \fefore setting up your system. 
\beep the instructions for further reference. Please heed t\che warnings and  
follow the instructions.
Caution: To reduce the risk of e\clectric shock, do not open the\c loudspeak -
er. There are no user-servicea\fle parts inside. Refer servicing  to qualified 
service personnel.
This product, as well as all attached extension cords, \fust be ter\finated with 
an earth ground three-conductor \bC \fains power cord like the one supplied 
with the product. To prevent shock hazard, all three co\fponents \fust always 
be used.
Never replace any fuse with a value or type other than those specified. Never 
bypass any fuse.
\blways switch off your entire syste\f before connecting or disc\nonnecting any 
cables, or when cle\naning any co\fponents.
Do not place this unit on an unstable cart, stand or tripod, bracket or table. The 
unit \fay fall, causing seriou\ns injury and/or serious da\n\fage. When cart is used, 
use caution when \foving the cart/apparatus co\fbination.
Do not expose this product to rain or \foisture, never wet the inside with any 
liquid and never pour or spill l\niquids directly onto this unit. Please do\n not put 
any objects filled wi\nth liquids (e.g. vases, etc.) onto the speaker.
Check if the specified voltage \fatches the voltage of the power supply you 
use. If this is not the case do not conne\nct the loudspeakers to a power source! 
Please contact your local dealer o\nr national distributor.
CautionRisk of electrical shock Do not open
Risque de shock electrique Ne pas ouvrier
CAUTION: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE BACK COVER OR ANY OTHER PART. NO USER-SERVICABLE PARTS INSIDE.
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. REFER SERVICING TO QUALIFIED PERSONNEL.
Safety Instructions   
						

							3
S6X Manual / English
Protect the cord fro\f being walked on or pinched.
\blways use fully checked cables. Defective cables can har\f your speakers. They 
are a co\f\fon source for any kind of noise, hu\f,\n crackling etc.
\blways keep electrical equip\fent out of the reach of children.
\blways unplug sensitive electronic equip\fent during lightn\ning stor\fs.
The  \fonitor should be installed near the socket outlet and disco\nnnection of the 
device should be eas\nily accessible.
To co\fpletely disconnect fro\f \bC \fains, disconnect \nthe power supply fro\f 
the \bC receptacle.   Never use fla\f\fable or \nco\fbustible che\ficals for cleaning 
audio co\fponents. 
\bvoid touching the speaker \fe\fbranes and do not bloc\nk the woofer’s 
ventilation ports. 
Never expose this product to extre\fely high or low te\fperatures. Never 
operate this product in an explosi\nve at\fosphere.
High SPL’s \fay da\fage your hearing! Please\n do not get close to the 
loudspeakers when using the\f at high volu\fes.
Please note that the diaphrag\fs build up a \fagne\ntic field. Do not pl\ny with 
\fagnetic ite\fs at close range to the diaphrag\fs.
\bssure free airflow behind the speakers to \faintain sufficient cooling.
Safety Instructions   
						

							4
Ta\fle of contents
 
Safety Instructions ..................\n..................\n......... 2-3
1.   Introduction  ..................\n..................\n..................\n. 5
2.  Quick Start   ..................\n..................\n..................\n.. 6
2.1  I\fportant Infor\fation   ..................\n..................\n... 6
2.2  Connecting the speakers   ..................\n................. 6
3.  Speaker Place\fent  ..................\n..................\n........ 7-8
3.1  General  reco\f\fendations  ..................\n..............7
3.2  Tweeter at height of ears  ..................\n.................7
3.3  The stereo triangle  ..................\n..................\n......... 8
3.4  Surround place\fent  ..................\n..................\n...... 8
4.  Speaker \bdjust\fent   ..................\n..................\n...... 9 -1 0
4.1  The Front Control Panel  ..................\n..................\n.9
4.2  Input Gain  ..................\n..................\n..................\n.... 9
4.3  X-Curve Filter  ..................\n..................\n................. 9
4.4  Driver Gain   ..................\n..................\n..................\n... 10
4.5  High / Low Shelf EQs  ..................\n..................\n.... 10
4.6  Bass EQ Section  ..................\n..................\n............ 10
4.7  LED Di\f  ..................\n..................\n..................\n....... 10
5.  Troubleshooting  ..................\n..................\n............. 11 
5.1  No or distorted signal  ..................\n..................\n.... 11
5.2  Parasitic noises  ..................\n..................\n............. 11
6.  Maintenance  ..................\n..................\n..................\n 12
7.   Shipping / Packaging   ..................\n..................\n.... 12
8.  Environ\fental Infor\fation   ..................\n.............. 12
9.  EU Declaration of Confor\fity  ..................\n..........13
10 .   Li\fited Warranty   ..................\n..................\n........... 14
10.1  Ter\fs and Conditions  ..................\n..................\n.... 14
10.2  How to clai\f  ..................\n..................\n..................\n 14
11 .   Technical Data  ..................\n..................\n............... 15   
						

							5
S6X Manual / English
1. Introduction
Dear custo\fer,
Thank you for choosing the \bD\bM \budio S6X \fainfield \fo\nnitor.
\bD\bM loudspeakers are built for \faxi\fu\f quality reproduction and audio perfection. 
Our speakers of the  SX series are precise, high-resolution speaker syste\fs which \feet 
highest expectations in sound quality and crafts\fanship.
The  S6X  is  suitable  for  \fain  \fonitoring.  It  is  an  ideal  tool  for  no-co\fpro\fise  sound 
reproduction in all lar\nger environ\fents.
The S6X is a four-way ported active syste\f that uses the new X-\bRT tweeter and an 
X-\bRT \fidrange speaker, ensuring full co\fpatibility with the latest expanded high 
frequency resolution \fedia for\fats plus four HexaCone
©-bass/\fidrange drivers. 
Each one of the  drivers uses an individua\nl PWM a\fp with continuous output\n of up to 
500 Watts (RMS) for the subwoofer channels and 250 Watts (RMS) for the Treble- and 
\fidrange drivers.
This  \fanual  is  intended  to  provide  you  with  infor\fation  about  your  new  \bD\bMs.  It 
contains  important  information  regarding  safety,  setting  up,  handling,  and 
warranty. We request that you read these sections carefully to ensure easy set up and 
prevent potential proble\fs.
If  you  have  any  questions  about  this  or  any  of  our  products,  please  don’t  hesitate  to 
contact us – we will be happy to assist you.
For  detailed  infor\fation  concerning  \bD\bM’s  technologies  and  products,  co\fplete 
reviews,  and  a  list  of  worldwide  \bD\bM  users  and  studios,  please  visit  our  website: 
www.adam-audio.com
You are invited to share your experience with our products by joining us on Facebook 
and  also, if you don’t want to \fiss out on the latest info  on \bD\bM Professional \budio, 
co\fe and  follow us on Twitter!
We  hope  very  \fuch  that  you  really  enjoy  your  new  loudspeakers,  and  wish  you  \fany 
delightful hours with the\f.
The \bD\bM \budio Tea\f   
						

							6
2.1 Important Information for set up
\bfter having unpacked your loudspeaker, please allow the syste\f to accli\fate to 
the te\fperature of the roo\f for approxi\fately an hour.
We reco\f\fend using high q\nuality cables to guarantee opti\fal perfor\fance.
It is i\fportant to ensure the speakers sit fir\fly on a solid surface!
We reco\f\fend that you retain the original packaging, as it is the best  way to 
guarantee safe transportation should the need to do so arise.
Please note that the loudspeakers will take so\fe break-in ti\fe to achieve 
opti\fu\f sonic perfor\fance. 
2.2  Connecting the spea\ckers
a)  Before connecting the loudspeakers to your audio co\fponents and the power 
source \fake sure that both the loudspeakers and your audio source are switched 
off and set the level controls fully counterclockwise.
\f)  Connect the loudspeakers with your audio source by using  XLR cables. The \fa\nle 
plug goes into the loudspeaker, the fe\fale plug into your audio co\fponent.
c)  Check if the specified voltage \fatches the voltage of the power supply you use. 
If this is not the case do not conne\nct the loudspeakers to a power source! Please 
contact your local dealer o\nr national distributor. 
If the voltages \fatch, use the included power cables to connect the loudspeaker 
to the \bC sockets.
d)    Switch on the \fain on/off switch on the front panel of the loudspeaker.
e)    Make sure that the line out level (volu\fe) of your stereo is either at a low level or 
all the way off. Then, switch on your audio syste\f.
f)    Turn on your source of \fusic and adju\nst the volu\fe carefully.
2. Quick Start   
						

							7
S6X Manual / English
3.1 
General recommendations
Please \fake sure that there are no obstacles in the way fro\f  the \fonitor to your 
ears. You should be able \nto see the speakers co\fpletely. 
The distance to the surrounding walls should be at \nleast 40 c\f to avoid early 
reflections, which will degrade the sound.
The loudspeakers should be aligned\n with the listener’s position.
Please note that vibrating parts of nearby objects can \fask \nthe sound.
Mechanical adjustments: If you plan to \fodify the speaker cabinet (e.g. dr\nilling 
holes), please cont\nact us before doing so. Usually, we will handle your warranty 
obliging.
 
3.2  Tweeter at the height o\cf ears
The Tweeter should be posit\nioned approxi\fately at the height of your ears.  If the 
speaker does not point r\night in your direction, you \fight lose sound \n
infor\fation.
In case you need to position the speaker in a significant l\nower or higher positi\non, 
the \fonitor should be angled accordingly.
3. Speaker Placement   
						

							8
3.3 The Stereo Triangle
If the loudspeaker is going to be used for stereo ap-
plications, the opti\fu\f listening position shoul\nd be at 
the top of an i\faginary equilateral triangle with the two 
loudspeakers should be placed\n at the other two points 
of this triangle.
The loudspeakers should be aligned\n with the listener’s 
position.
3.4  Surround Placement
Speaker positioning for \fulti-channel stereo purposes 
is ideally based on a circle with speakers placed at 0° 
(Center), 30° (Front Right), 110° (Rear Right), 250° 
(Rear Left), 330° (Front Left), with the listener being 
the circle’s center (Radius between 0.7-2.0 \f). This\n ITU 
reco\f\fended configuration \fay vary depending on the 
purpose of the control roo\f (\fusic or fil\f). \nHowever, 
it is reco\f\fended to create a sy\f\fetrical lis\ntening 
position with the front side and surround speaker 
pointing to the listener’s ear.
The distance to the surrounding walls should be at \nleast 
40 c\f to avoid early reflections, which can degrade the 
sound.
3. Speaker Placement   
						

							9
S6X Manual / English
4.1 
 The front control panel
On the front you will find a new, highly sophisticated control panel that allows 
detailed fine-tuning of your loudspeakers to your particular roo\f acoustics and 
personal listening preferences. The following tips are intended to assist you at 
using the controls in the best \fanner. 
Please note that using the controls \fay have a great i\fpact on the overall sound 
characteristics  of  your  loudspeakers.  We  reco\f\fend  using  the  controls  with   
ut\fost care and only after several audio tests with fa\filiar recordings.
4.2   Input Gain
‘Input  Gain’  regulates  the  overall  input  sensitivity  of  your 
loudspeaker  within  a  range  of  -10  to  +10  dB,  and  controls  the 
volu\fe of your loudspeaker equally in all frequency ranges.
4.3   X-Curve Filter
In large fil\f score \fixing roo\fs, it \fay be desirable to have a 
representation  of  what  the  sound  is  like  in  \fovie  theatres.  To 
\feet  the  ISO  2969  Standard,  the  Dolby™  X-curve  has  to  be 
applied. The X-curve engages a 3 dB per octave roll-off above 2 
kHz. The S6X has a switch located below the input selector that 
activates this filter, eli\finating the need for external processing 
during fil\f score \fixing sessions.
4. Speaker Adjustment   
						

							10
4.4 Driver Gain
Whereas the ‘Input Gain’ raises or lowers the 
overall input sensitivity up \nto +/-10 dB, the 
‘Driver Gains’ work only within the corresponding 
frequency range, raising or lowering fro\f  +/-2 to 
+/-6 dB. 
4.5  High / Low Shelf EQs
The other two controls operate in a different 
\fanner. The ‘High’ and ‘L\now’ controls are shelving 
filters that progressively lower or raise frequencies 
below 150 Hz / above 6 kHz up to 6 dB (see Fig.). 
 
 
 
 
 
 
 
4.6  Bass EQ Section
There are three fully para\fetric EQs (20 Hz \nto 200 
Hz) that can be used to co\fbat standing waves 
in the control roo\f. The EQs can be\n bypassed 
individually or as a group so that their overall 
effect can be analyzed in direct co\fparison to the 
unaffected signal. 
4.7  LED Dim
\bll  LED  indicators  can  be  di\f\fed  if  necessary  by 
pressing the ‘LED Di\f’- button.
4. Speaker Adjustment
Room EQ 6 kHz  fo\b high 
f\bequencies above 6 kHz