Adam Equipment Eclipse Analytical Balances Eclipse Set Up Guide 5274 28Sep2015

Part # 3.01.6.6.12085 , Rev 1.0, Sep 2015
Set-Up Guide
www.adamequipment.com  

Precision - 1mg (0.001g)
Precision - 10mg (0.01g) 

Analytical - 0.1mg (0.0001g)
FrontBack 

Set Up
1.
1st2nd
3rd
4th
BackFront
3.
2.
Analytical Remove any transit packaging and protection pieces
Open
Closed
4.
For Eclipse assistance, scan QR code or visit 
www.adamequipment.com/Eclipsesupport 

1.2.
Precision Remove any transit packaging and protection pieces
Precision - Top Loader Remove any transit packaging and protection pieces
1.2. 

Locating the balances
1.
3.
Avoid VibrationsStatic Free Area
2.
4.
Avoid Extreme TemperaturesAvoid Water Contact     

g
Turning on your balance (warm up)
12 Hour 
Warm Up
The balance must be plugged into the mains power and turned on for a minimum of 12 hours , 
prior to any calibration and use. The balance should then be calibrated before use.
External Calibration
Cal
g
Select
Put on weight matching desired calibration weight
Remove the calibration weight
Weight removal is automatically detected Weight is automatically deteced 
and calibration begins100g
100g
g
g
Calibration completeg
✓
For operating and set up videos...

Weighing
Changing weighing units
Unit
Setup
g, kg*, mg*, ct, GN, N, oz, ozt, dwt, lb*, dr, mm, tl T, tI H, tl S, tl, ti, T, Cus Unit 
*kg, lb available for Precision only, mg available for Analytical only.  

Taring the balances
Net    

WARRANTY INFORMATION
Adam Equipment offers Limited Warranty (Parts and Labour) for any 
components that fail due to defects in materials or workmanship.  
 
Warranty starts from the date of delivery.
During the warranty period, should any repairs be necessary, the purchaser 
must inform its supplier or Adam Equipment. The company or its authorised 
technician reserves the right to repair or replace the components at the 
purchaser’s site or any of its workshops depending on the severity of the 
problems...