Acura Embedded Tablet AcuTabM Quick Guide

 
 
 
AcuTab -M  
 
Quick  Guide 
 
 
 
 
 
 
 
 
 
 
 
 
 
  Acura Embedded Systems Inc.  
 
 
 
 
 
Main  Features  
 Platform: Intel® Cedar Trail Platform (N2600+NM10)  
GPU: Intel ATOM N2600 1.6GHz Dual core  
Chipset: Intel® NM10 Express C hipset 
System Memory: 2GB DDRIII 800 SO -DIMMM 
Storage: 1 x 32G SATA Slim Half -Size Solid State Disk  
LCD Panel: 10.4-inch LED Backlight Screen  
10.4“ XGA (1024x768) 340nits LCD + T/P(Polarizer + 1/4 λ+ AR)  
Touch Panel   
5 -wire Resistive Touch Screen...

 
Viewing AcuTab-M 
 
Before starting to set up the Acu Tab-M , get familiar with the locations and purposes of 
controls, connectors and ports, which are illustrated in the figures below. When placed 
upright on the  desktop, the front panel of AcuTab- M appears as shown in 
below.
 
F1 Button F1=explorer     F2 Button F2=Windows Media Player     F3 Button F3=OnScreen keyboard (osk)      F4 Button F4=Task Manager     F5 Button F5=Calculator     Fn Button Fn = Hotkey Utility     
Fn+F3 Button (SAS)...

[Setup] 
 
F1_EX E=c:\windows \explorer.exe  
 
F1_PARA=  
 
F1_PATH=  
 
F2_EXE=C: \Program Files \Windows Media Player \wmplayer.exe  
 
F2_PARA=/prefetch: 1  
 
F2_PATH=  
  F3_EXE=C: \WINDOWS \system32 \osk.exe  
 
F3_PARA=  
 
F3_PATH=  
  F4_EXE=C: \WINDOWS \system32 \taskmgr.exe  
 
F4_PARA=  
 
F4_PATH=  
  F5_EXE=C: \WINDOWS \system32 \mspaint.exe  
 
F5_PARA=  
 
F5_PATH=  
 
 
The configuration file is located under drive C: root directory as 
c:\FKeySet.txt  
 
Barcode Buttons (F1 / F4)...

 
To activate the function, please again tick the option as shown in the 
following 
graphics to make the device enable.  
 
 
 
 
 
 
 
 
Activate Wi -Fi function  Activate Bluetooth function 
 
 
 
 
 
 
 
 
 
Activate 3G function 
 
DC- Jack  
 
Lets you connect the AC power adapter in supplying continuous power to  AcuTab-M and 
recharging the battery.   
 
The AC adapter provides external power source to your system and charges the internal 
battery pack at the same time. The AC adapter also has an...

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
For battery capacity status: 
 
AcuTab-M  is equipped with one internal battery and one optional external battery.  
 
The battery capacity status shown below advises you, that only one internal battery is 
embedded with the system with fully charged, and there is no 2
nd  optional battery installed 
in the system.  
 
 
 
 
 
 
If the system installs both the 1st internal battery and 2nd optional battery, the illustration 
shown below indicates its current charging...

You can click   or   to reduce or increase the LCD brightness.   Also, you can slide the 
scale bar  
  to set the brightness.   
  Volume Control  
For Volume adjustment, press the  Volume 
 icon.  
 
 
 
 
 
 
 
 
 
 
When you press it, the Volume control panel is appeared as follows:  
 
 
 
 
 
 
You can click  
 or   to reduce or increase the audio volume 
incrementally.   
Also, you can slide the scale bar  
  to set the audio volume. You can 
tick the Mut e  
 to mute the audio.   
  Launch Webcam...

•  Keyboard   
•   Mouse (for system software installation)   
 
A keyboard is an input device; a mouse is a pointing device. Please connect these two 
devices as graphics shown below to interact with your system.  
 
 
Using a SIM Card  
 
AcuTab-M  can be equipped with a 3.5G module (optional) that can work with SIM  card. (SIM 
card  is always working with 3.5G module.)  
 
Inserting a SIM Card  
To insert a SIM card into the SIM Card slot:  
 
  1.   Turn off your System.  
The  AcuTab -M must be...

 
 
 
 
 
 
 
 4.   Insert FFC cable of GPS module into connector slot. Screw to secure the GPS module 
onto the tablet.   
 
  GPS Module  
 
 
 
 
 
 
 
 
 
5.   Under Windows, press the RF Button,  and enable GPS module from the pops -up 
screen’s option list.   
 
 
 
   
 
 
Bios Setup Program 
 
This system comes with a chip from Phoenix BIOS that contains the ROM Setup information for 
your system. (This chip serves as an interface between the processor and t he rest of the system 
components.)...

 
 
System Date   To set the date, highlight the Date field and then press +/ - keys to set the current date. Follow 
the month, day and year format.  
System Time    To set the time, highli ght the Time field and then press +/ - keys to set the current time. Follow 
the hour, minute, and second format.  
BIOS Version   The system will automatically displays the information of BIOS version.  
EC Version    The system will automatically displays the  information of EC (Embedded Controller) 
firmware...

Exit Control 
 
 
 
 
 
 
 
 
 
 
 
 
 
Exit Saving Changes    When you select this option, it will pop-out the following message, “Save configuration 
changes and exit setup?” Select [OK]  to save the changes and exit the BIOS SETUP 
UTILITY.   
 
Exit Discarding Changes   
When you select this option, it will pop-out the following message, “Discard changes and 
exit setup?”. Select [OK] to exit the BIOS SETUP UTILITY without saving any changes.   
 
Load Setup Defaults   
When you select this option,...