Acura Embedded AcuraVision 153c Quick User Guide
Have a look at the manual Acura Embedded AcuraVision 153c Quick User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 51 Acura Embedded manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
AcuraVision 1.53c User Guide ura Embedded Systems Inc AcuraVision 1.53c User Guide ura Embedded Systems Inc
AcuraVision 1.53c
Quick User Guide
(version 1.1)
Acura
Embedded Systems Inc.
Guide Index Site Setting --------
----------------------------- 1
Camera Setting ---- ---------------------------- 3
IP Camera Setting ---------------------------- 4
Network Setting --- ---------------------------- 5
Detect Event Selection Setting --------------6
Remote View Setting --------------------------9
Events Information Chec king ----------11
Audio Setting ----- ---------------------------12
Q&A -------- --------------------------- ----------13
AcuraVision 1.53c User Guide ura Embedded Systems Inc AcuraVision 1.53c User Guide ura Embedded Systems Inc
Allow remote access
setting
Site Setting
When first time to open acuraVision 1.53c, following settings are
necessary.
.Time setting
.Site name setting ( User can choice own Site name )
.Recording database setti ng (recording all events)
.Temp folder setting (record ing all events email send)
Recordin
g database settin
g
.Site name settin
g
Allow remote access setting
Suggest to select it if plan to remote control or view.
-1-
-2-
1.Click
open pop- up
2.Click Preferance Tem
p folder settin
g
Time settin
g
Single
view
4 split
s
creen
AcuraVision 1.53c User Guide ura Embedded Systems Inc AcuraVision 1.53c User Guide ura Embedded Systems Inc Camera Setting
After Site S etting
completed, need to set camera quantity and
camera feature.
Click
Setting Preference Camera C # (which
camera is? e.g. C5 in below figure. )
Only connect selected came ras and disconnect others
unselected cameras.
Otherwise, acuraVision 1.53c will shows again and again “Preference message box a bout enabling recoding…….”.
IP Camera Setting
Before IP camera setting, four important following steps have to
complete
1.Check site computer network connection is correct and
working.
2. acuraVision Netw
ork setting (
Please reference “Network Setting
“Chapter in next page in this Guid
e)
3. IP camera own hardware (reference relative IP camera user manual
)
4. IP camera own software (
reference relative IP camera user manua
l)
Then,
Clicking
the button opens the following pop-up menu:
Click here to setting IP Camera
Depend on CV capture card’s
video ports (4 ~ 16)
Click “ Disconnect camera
“to
disconnect others unselected
Settin
g button
When select IP cam
eras, the qua ntity of IP cameras should be
less then total camera quantity, otherwise, split screens will be
occupied by all IP cameras. After IP camera’s channel selected,
following message box will come.
-3- -4-
AcuraVision 1.53c User Guide ura Embedded Systems Inc AcuraVision 1.53c User Guide ura Embedded Systems Inc Network Setting
At first, find own computer’s IP address.
Enter “windows operating system” click :START Run Type : cmd click: OK
Enter DOS sub-window shows as following.
C:\Documents and Settings\User>_
Type : ipconfig command to check IP address message.
E.g. IP Address ………..: 192.168.0.173
Then copy IP address to Bind web Server IP address .
Select TCP Port # or default is 80
Detect Event Selection Setting
In acuraVision 1.53c, there are 8 detect functions.
Motion detection
Sensor detection
Manual trigger(press Enter) detection
Missing &left object detection
Virtual fence detection
Secure zone detection
Secure Change detection
Flow counting detection
The Steps of Detection Settings as follow
ing:
At “Detect events by” sub-window,
click select boxes to select
different detection
s. Then do Detection Respond Setting.
Detect events by
Detection Respond
Next page will show a d
etection setting example.
-6-
-5-
AcuraVision 1.53c User Guide ura Embedded Systems Inc AcuraVision 1.53c User Guide ura Embedded Systems Inc
For instance, setting “Flow
Counting” detection.
Select “Flow Counting “selection box then click “Settings”
button Flow Counting Screen will come as following.
At Flow Counting Setting Screen, completed two steps at least.
1. Setting one or more flow counting LINE and flow Direction
(RED and BLUE arrow).
2. Setting flow counting tim
e
If set 24 hours flow counting, type 1440 minutes to
Counter
which shows at previous page figure.
if you enter 60 minutes to
, the counter will reset to zero
after every hour.
Flow Counting Line
& Direction setting After c
lick “notificatio n” at Detection Respond, follows figure
will come.
Notification’s Alarm Selection, Email Setting
Email: sending any detections of Motion,Missing&Left,Virtual
fence,Secure zone and Scene Change to setting email address.
Alarm : have five sound ‘s alarm option which are Dog Bark, Bell
Ring, Whistle,Las er and Custom. Before this Alarm
setting,Must completed Audio Setting.)
** Fax and Phone need modem hardware to installation.**
Setting flow counting time (min.) !! Time Counter
-7-
-8-
Detection
Respond sub-
window
AcuraVision 1.53c User Guide ura Embedded Systems Inc AcuraVision 1.53c User Guide ura Embedded Systems Inc Remote View Setting
Remote View offers an easy way to remote control by web
explorer users. Following steps will complete Setting.
1. Check Network Setting correctly.
If Network Setting is not work, Remote View will be
no work. Please reference Network Setting.
2. After get the Acura Vision Site IP address, for instance,
192.168.0.173, fill IP address to Bind Web Server IP
Address line.
3. (Option) Change TCP port #.for instance 80 or 90
which is also from below Network setting Page.
After above three steps,
Remote View will be realized in web
Explorer as follow.
**When first time use
Remote View function,
Explorer will request
Run two ActiveX control.
Please let them running.
**
htt
p://Web Server IP Address: TCP
port(eg.htt
p://192.168.0.173:90
)
Remote View Connect button
-9- -
10
-
AcuraVision 1.53c User Guide ura Embedded Systems Inc AcuraVision 1.53c User Guide ura Embedded Systems Inc Event Information Checking
In general, when Click
button,all detect
event messages will be found.
Type If you want to view only the logs of one type of
event such as Motion event, se lect it from the Type list.
Log list The Log list shows details about each event, such as the start and end times of the event, camera
number (indicated by C1 – C4) or sensor number
(indicated by S1 - S16) that detected the event, type of
event, etc.
Camera If you want to view only the logged events of one
camera, select the came ra number from the Camera list.
Clear All Click this button to delete all event logs from the
list.These events are not deleted from the record
database.
View Click this button to launch the Event Viewer program and play back a selected event. Not all events
contain video recordings.
Click any of the other tabs in the Event Log dialog bo
x to
view only logged events of a particular type of event.
Audio Setting
Setting Preference Audio
Event Lo
g
select Audio
#1, following figure show setting.
Must empty this checkbox.Otherwise, audio
is not work !!
1. First check audio hardware connection.
2. Empty “disconnect audio” checkb
ox of selected audio
#.
-11- -
12
-
AcuraVision 1.53c User Guide ura Embedded Systems Inc AcuraVision 1.53c User Guide ura Embedded Systems Inc Q & A
Q: Why sometime occurs
fogs screen and how to
change to clear screen ?
A: Most of time, It happened afte r setting a particular detection.
You have to click (turn off) “Mask” selection.
Q: how to use Flame, People Counter, Face detection,
Loitering detection, Car Pl ate and Smoke detection ?
A:
all these detections are not offered by Acura vision 1.53c
because Some of them need specify hardware. Q: What is Operation Logs
?
A:
Site Server records login/lo gout sessions, preferences
modification date and time, as well as date and time logs
of connections from remote sites. To view these operation
logs, first click
on the Site Server program screen.
Then, in the pop-up menu, click Operation Log to open the
Logs dialog box.
Log list The Log list shows the date and time, user
account name, and the action performed.
Delete Click this button to delete all recorded logs. Only
users with administrator privileges have rights to delete
operation logs.
Save As Click this button to save operation logs as a
text file.
Keep as Select this option and specify how many days
of operation logs to maintain. This enables Site Server to
purge old logs after the specif ied number of days and free
up disk space.
-13
- -
14
-
AcuraVision 1.53c User Guide ura Embedded Systems Inc AcuraVision 1.53c User Guide ura Embedded Systems Inc ACURA INSTALLATION INSTRUCTIONS The following instruction is designed to assist the technician or customer in the basic steps of installing Acura products and makes the assumption that commo nsense and previous experience will aid in the installation. Safety and caution must always take precedence in the installation of any electrical or mechanical system. The correct tools, parts, fasteners, safety equipment as well as any instructions, diagrams and schematics mu st be gathered, reviewed or made availa ble prior to beginning the process of installation. The installer is required to prepare in advance the work area and see that the electrical or mechanical needs of the project are in place before starting and that any other possible interference are addressed. A review of the Installation Check List is critical since this li st needs to be checked off and a copy sent back to the supplier so it can be attached to the Customer file. Al l projects require the filling out of appropriate forms or else warranty may be limited. The list and/or these Installation Instructions are not de signed to be exhaustive or restrictive they are part of a process of total quality management and will he lp the installer to be in control of the project. Please refer to caution and installation guides provided with each piece of equipment, component or accessory. In order to receive the best performance out of a new Acura computer system all components should be installed in a way that allows for ease of operation by customer’s trained personnel or trainer under regular operating conditions. Please take a moment to check off the following boxes so the undersigned can verify that the installation is complete and operational. If something is not working as initially configured and tested please inform the installer immediately so that the problem can be fixe d as promptly as possible. Follow up with a Corrective Action Report (CAR) where appropriate. Below are some points or conditions to watch ou t for: (Please initial them off as you proceed) All parts, components and accessories are received and prepared for installation Areas to receive equipment are clear and free from obstruction The mounting system selected is appropriate for the apparatus. Before attaching brackets make sure there are no hidden fluid or wiring obstructions Use appropriate fasteners and backing as required. Ensure Power Sources are identified and adequate to operate system without over taxing available battery reserve. An Amp hour survey should be completed and additional battery capacity addressed. Power is direct from battery to a distribution fused block. -15- Before attaching any wiring be sure that power leads are correctly fused and correctly identified (+ or –) as well as correct voltage and wire size (12 ga power supply minimum) Caution: Incorrect connection of wires will affect the elec tronics and will void warranty – (Burnt wiring and blown circuitry is evidence of improper installation) Fasteners will require lock washers, washers, isolation or proper grounding Computer is adequately hidden and out of the way ye t readily accessible with good ventilation. Touch screen is mounted securely to the apparatus. Touch screen is in a location where desired user/s can comfortably operate the unit Unit is fully functional while the engine or radio of the apparatus is running and free of RF Connections, components or accessories are not impeding the duties of personnel Factory operating system (locked) and all factory applications are functional All service personnel and trainers understand the components and wiring for all applicable systems as well as In-line fuses are accessible and their locations are known Administrative controls for systems are in the hands of trained service personnel Note: Check twice install once. For Assistance call your sales and servic e representative first for guidance. _________ ___________________________ ________________ Print Name Signature of Chief or Representative Date of signature _________ __________________________ ________________ Print Name Signature of Authorized Installer Date of signature -16-
AcuraVision 1.53c User Guide ura Embedded Systems Inc AcuraVision 1.53c User Guide ura Embedded Systems Inc With the uniqu e set of products, Acura Embedded Systems remains committed to its goal of providing trouble-free and customer-friendly service. A special customer service unit has been set up specifically to cater to our esteemed customers needs. Unit #1, 7711-128th Street, Surrey, BC V3W 4E6, CANADA Ph: (604) 502-9666 Fax: (604) 502-9668 North American Technical support contact your Salesperson Acura Embedded Systems Inc. Technical Support: AU/NZ: 3 5284 0222 UK: 8453 455 734 Cal USA/CANADA: 1-866-528-2214 Customer Name : ____________________________________ Location: _________________________________ Serial Number: ____________________________ VIN Number: ______________________________ Unit Number: ____________ Date Installed: _____________________________ Who Installed: _____________________________ Contact Number: ___________________________ Notes: Toll Free 1-866-502-9666 www.acuraembedded.com -17- [email protected] Mailing address: Toll Free 1-866-502-9666 -18-