Acumen Camera NVR Series AiM HD 26 Software User Manual
Here you can view all the pages of manual Acumen Camera NVR Series AiM HD 26 Software User Manual. The Acumen manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 31
AiP -N series 16CH/9 CH/4 CH Manual 30 Insert the IP address of the NVR Once the address has been added it will remain stored for future use Highlight your NVR from the left hand bar and click connect A download panel will then appear. This means the backup manager programme is communicating with...
Page 32
AiP -N series 16CH/9 CH/4 CH Manual 31 12.3 Convert already downloaded files Backup Manager allows you to convert multi channel backups to single channel AVI files. To do this follow the steps below: Open Backup Manager Click file > convert AVI file Locate desired backup files Choose the channels you...
Page 33
AiP -N series 16CH/9 CH/4 CH Manual 32 Quick Installation Guide This guide has been designed to provide a basic overview of key installation processes. If you require more detailed instructions, please refer to the full installation guide that follows this section Chapter 1: Rear Panel 1.1 16CH Rear View...
Page 34
AiP
-N series 16CH/9 CH/4 CH Manual
33
1.2 9
CH / 4CH Rear View
1. RJ - 45 Keyboard In 5. Alarm I/Os
Alarm 2 input switches, 1 N/O alarm
output, and 1 N/C alarm output
2. HDMI Output 6. Audio Output
RCA audio connector
3. 12V DC Input 7. eSATA Outpu t
4. LAN / USB...
Page 35
AiP -N series 16CH/9 CH/4 CH Manual 34 Chapter 2: Hard Drive(s) 2.1 Adding hard drive(s) Please ensure unit is switched off Open unit by removing side and rear screws Add hard drive(s) using the supplied mounting screws and sata/power cables Power Unit Power up unit by turning the switch on...
Page 36
AiP -N series 16CH/9 CH/4 CH Manual 35 Chapter 3: Time and Date Settings Enter the setup menu Select system from the left hand options Select date/time Adjust time and date Select display format Note: See user guide for how to navigate the system, i.e. menu’s, camera selection etc.
Page 37
AiP -N series 16CH/9 CH/4 CH Manual 36 Chapter 4: Network Settings Enter the setup menu Select network from the left hand options Ensure static is displayed under IP mode Enter your IP address and subnet mask range Note: This guide will refer to a static IP address. For other options, see...
Page 38
AiP -N series 16CH/9 CH/4 CH Manual 37 Chapter 5: Adding Cameras Enter the setup menu Select camera from the left hand options Select WS discovery The NVR will now search the network for installed cameras Select Get Snap to make camera identification easier Assign the relevant cameras to a...
Page 39
AiP -N series 16CH/9 CH/4 CH Manual 38 Menu configuration Chapter 1: Setup Menu The setup menu contains menu settings for cameras, monitors, recording, alarm, system, network, and PTZ. The details of all the setup menu items are described in this chapter. 1.1 Camera setup To setup an AiP camera, use...
Page 40
AiP -N series 16CH/9 CH/4 CH Manual 39 1.1-3 Camera source To setup a camera channel, you can select IP cam, demo video or no IP connection from this setting 1.1-4 AiP camera address Once the source is set to an AiP camera, you can enter the IP address of the AiP camera for that specific channel. To...