Acumen Camera IP Speed Dome Series AiPY14D02N2B User Manual

  10  Chapter 3-3-1 Server Settings 
Server settings  contain H.264  HD video server  or IP PTZ camera server’s system information such as 
MAC address, firmware version, users, system timer, and other system settings.    To change or to 
use these options, please follow the instructions at this section.    
MAC Addr ess 
Network MAC address of the video server or camera  
Firmware Version & OS Version  
Firmware update allows a user to upgrade  H.264  HD video server or IP PTZ camera’s firmware...

  11  Chapter 3-3-2 User Settings 
There are ten user accounts allowed  for the system.    Each account can be configured for its access 
rights.    To add/edit a user, please click on Add/Edit User button.    To access  H.264 HD vide o server 
or IP PTZ camera  without authentication,  set Bypass Logon radio button to ON.     
To change account name, please type  the new account name in Account edit box.    To change new 
password, please type the new password in the New Password ed it box.    Click on...

  12  Synchronize with a PC
 
A user  can synchronize the PC system timer to the IP camera's system timer. 
 
Chapter 3-3-4 System Setting  
Load Default fea ture allows to load manufacturing default.    There are certain critical settings such as 
IP addresses and video system whic h are not affec ted by this operation.    To reboot  H.264 HD video 
server or IP PTZ camera , click on Reboot System hyper link.      
   
To update firmware of  H.264 HD vide o server or IP PTZ camera , please click on...

  13   
For Internet access configuration, please contact your local ISP  for global IP address.    Once the 
physical  Internet connec tion gets installed, enter IP address (global), Subnet Mask, and Gateway IP  
from the ISP .    
 
  Default  DNS IP Address —Primary Domain Name Server, the IP address of the domain name 
server  
   Second  DNS IP Address —
Secondary Domain Name Server, the IP address of t he domain 
name server, a backup DNS server for  default DNS 
   PPPoE Account —
Account name...

  14  Chapter 3-4-4 SMTP Service 
Alarm or motion notification feature can send an alarm or motion detection snapshot to an E -mail 
account.    To enable alarm or motion sending E -mail feature, please setup the follow ing email 
accounts.    
To send a test snapshot to a SMTP server, please click  “Send ” button to test and to verify the 
connection of the SMTP server.  
 
Chapter 3-4-5 FTP Service 
Alarm or motion notification feature can send alarm or motion detection snapshot  to an FTP account....

  15  Send email to Yahoo or Gmail account.    Please follow:
 
   E-mail Address: Please fill in the SMTP for Yahoo or Gmail account.   
  SMTP Serv er:  
For Gmail, please fill in "smtp.gmail.com".    
For Yahoo E -mail, please fill in "smtp.mail.yahoo.com".   
  SMTP Authentication: Please check "AUTH SSL".   
  SMTP Port:   
For Gmail, please fill in "465".   
For Yahoo E -mail, please fill in "465".   
  Authentication : Select "Enable".   
...

  16  Chapter 3-5 Video Settin
gs 
This section describes the details in setting the H.264 video ’s attributes.    The settings of bit rate 
control, video input, and video resolution can be configured.  
 
Chapter 3-5-1 Video General 
For transmitting H.264 video over low bandwidth network such  as Internet, please set the bit rate 
close to network upload bandwidth.    H.264 IP camera  can encode video frames based on the bit 
rate setting.    
 
Chapter 3-5-2 Weighted Streaming Mode 
Weighted...

  17  Chapter 3-5-3 Video Quality 
Under the tab <  Video Quality  >, there are categories including: < Camera Advanced  Ⅰ
> and < 
Camera Advance d Ⅱ
>. 
  3-
5-3.1 Camera Advance  Ⅰ
 
Camera Advanced  Ⅰ
Setting Menu  can be found under this path:  
Video Quality  > Camera 
Advanced  Ⅰ
 
In the Camera Advanced  Ⅰ
 Setups Menu, users can set various camera parameters including 
Day/Night (ICR), Mirror and Flip Function. Each setting is specified as follows:   
Day/Night 
IR Cut removable allows to...

  18  ■ 
Exposure  
In the Exposure Mode Setting users can select Auto, Shutter, Iris and Fix four modes.   
Exposure-Auto Mode 
In this mode can adjust the parameter of the Brightness/Flickerless/AGC Limit/Shutter Limit. 
Exposure-Iris Mode 
In this mode can adjust the parameter of the Brightness/Shutter/Flickerless/AGC Limit. 
Exposure-Shutter mode 
In this mode can adjust the parameter of the Brightness/Lens Iris/AGC Limit/Shutter Limit. 
Exposure-Iris Mode 
In this mode can adjust the parameter of...

  19  AWC Mode 
Auto White Balance Control
（One-Push White Balance).  Manual Mode 
In this mode, users can change the White Balance value manually via specifying R gain and B gain; the 
range of R/B gain is from 0 to 
127. I
ndoo r Mode  The indoor mode setting. 
Outdoor Mode 
The outdoor mode setting. 
 
■
  Sharpness  
Increasing the sharpness level can make the image looked sharper; especially enhancing the object’s 
edge. The Sharpness value is adjustable from 0 to 14. 
 
■
  BLC  
BLC Mode 
Us
ers...