Acumen Camera IP Speed Dome Series AiPI14D03N2B User Manual

 10 
Chapter 3-3-1 Server Settings 
Server settings contain H.264 HD video server or IP PTZ camera server’s system information such as 
MAC address, firmware version, users, system timer, and other system settings.    To change or to 
use these options, please follow the instructions at this section. 
 MAC Address 
Network MAC address of the video server or camera 
Firmware Version & OS Version 
Firmware update allows a user to upgrade H.264 HD video server or IP PTZ camera’s firmware 
remotely.    A...

 11 
Chapter 3-3-2 User Settings 
There are ten user accounts allowed for the system.    Each account can be configured for its access 
rights.    To add/edit a user, please click on Add/Edit User button.    To access H.264 HD video server 
or IP PTZ camera without authentication, set Bypass Logon radio button to ON.  
 
To change account name, please type the new account name in Account edit box.    To change new 
password, please type the new password in the New Password edit box.    Click on Submit...

 12 
Synchronize with a PC 
A user can synchronize the PC system timer to the IP cameras system timer. 
 
Chapter 3-3-4 System Setting 
Load Default feature allows to load manufacturing default.    There are certain critical settings such as 
IP addresses and video system which are not affected by this operation.    To reboot H.264 HD video 
server or IP PTZ camera, click on Reboot System hyper link.   
 
  
To update firmware of H.264 HD video server or IP PTZ camera, please click on Firmware...

 13 
 
For Internet access configuration, please contact your local ISP for global IP address.    Once the 
physical Internet connection gets installed, enter IP address (global), Subnet Mask, and Gateway IP 
from the ISP.    
 
 Default DNS IP Address—Primary Domain Name Server, the IP address of the domain name 
server 
 Second DNS IP Address—Secondary Domain Name Server, the IP address of the domain 
name server, a backup DNS server for default DNS 
 PPPoE Account—Account name of PPPoE service 
...

 14 
Chapter 3-4-4 SMTP Service 
Alarm or motion notification feature can send an alarm or motion detection snapshot to an E-mail 
account.    To enable alarm or motion sending E-mail feature, please setup the following email 
accounts. 
 
To send a test snapshot to a SMTP server, please click “Send” button to test and to verify the 
connection of the SMTP server. 
 
Chapter 3-4-5 FTP Service 
Alarm or motion notification feature can send alarm or motion detection snapshot to an FTP account.   
To enable...

 15 
Send email to Yahoo or Gmail account.    Please follow: 
 
 E-mail Address: Please fill in the SMTP for Yahoo or Gmail account.  
 SMTP Server:  
For Gmail, please fill in smtp.gmail.com.   
For Yahoo E-mail, please fill in smtp.mail.yahoo.com.  
 SMTP Authentication: Please check AUTH SSL.  
 SMTP Port:  
For Gmail, please fill in 465.  
For Yahoo E-mail, please fill in 465.  
 Authentication: Select Enable.  
 Auth Account and Password: Please fill in the E-mail address and password and...

 16 
Chapter 3-5 Video Settings 
This section describes the details in setting the H.264 video’s attributes.    The settings of bit rate 
control, video input, and video resolution can be configured. 
 
Chapter 3-5-1 Video General 
For transmitting H.264 video over low bandwidth network such as Internet, please set the bit rate 
close to network upload bandwidth.    H.264 IP camera can encode video frames based on the bit 
rate setting. 
 
 
Chapter 3-5-2 Weighted Streaming Mode 
Weighted streaming mode...

 17 
Chapter 3-5-3 Video Quality 
Under the tab < Video Quality >, there are categories including: < Camera Advanced Ⅰ> and < 
Camera Advanced Ⅱ>. 
 
3-5-3.1 Camera Advance Ⅰ 
Camera Advanced ⅠSetting Menu can be found under this path: Video Quality > Camera 
Advanced Ⅰ 
In the Camera Advanced Ⅰ Setups Menu, users can set various camera parameters including 
Day/Night (ICR), Mirror and Flip Function. Each setting is specified as follows: 
 
Day/Night 
IR Cut removable allows to schedule IR activation by...

 18 
■ Exposure In the Exposure Mode Setting users can select Auto, Shutter, Iris and Fix four modes.  
Exposure-Auto Mode 
In this mode can adjust the parameter of the Brightness/Flickerless/AGC Limit/Shutter Limit. 
Exposure-Iris Mode 
In this mode can adjust the parameter of the Brightness/Shutter/Flickerless/AGC Limit. 
Exposure-Shutter mode In this mode can adjust the parameter of the Brightness/Lens Iris/AGC Limit/Shutter Limit. 
Exposure-Iris Mode 
In this mode can adjust the parameter of the...

 19 
AWC Mode Auto White Balance Control（One-Push White Balance). 
Manual Mode 
In this mode, users can change the White Balance value manually via specifying R gain and B gain; the range of R/B gain is from 0 to 127. 
Indoor Mode 
The indoor mode setting. 
Outdoor Mode 
The outdoor mode setting. 
 ■ Sharpness 
Increasing the sharpness level can make the image looked sharper; especially enhancing the object’s 
edge. The Sharpness value is adjustable from 0 to 14.  
■ BLC 
BLC Mode Users can choose to...