Acumen Camera Dome Series AiPP24N05Y2B User Manual
Have a look at the manual Acumen Camera Dome Series AiPP24N05Y2B User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 53 Acumen manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
20 Note: If you forget the password, please return the device to u s. See appendix for emergency default.
21
Chapter 5 Advance Settings
Chapter 5-1 System Settings
Chapt
er 5-1-1 User Setting
There are ten user accounts allowed for the system. Each account can be configured for
acces
s rights. To add/edit a user, click “Add/Edit” user. To access an IP camera without
authentication, set the Bypass “Logon” radio to ON.
To change the account name, type the new account name in the “Account” box. To
chang
e the password, type the new password in the “New Password” box. Click
“Submit” to update the user settings. To delete a user, click “Remove User”.
Administrator: Enable or disable setup mode for a user
Panel Control: Enable or disable control panel for a user
Streaming: Enable or disable a streaming for a user
Chapter 5-1-2 System Log The IP camera documents can be accessed as operational logs. The operational log can be
found
at Advance->System-System Log link. Click “Save” to save the log as a text file.
To erase the log, click "Clean All".
22 Chapter 5-2 Advance Video and Audio Settings Chapter 5-2-1 Advance Video Setting To setup Exposure Control, Automatic Gain Control, White Balance Control, adjust the values ac cordingly. To increase, the sensitivity at night, adjust the MoonLight feature. Ex po sur e Value: adjust the value of the image exposure WDR: enable or disable the Wide Dynamic Range feature Black-light Compensation: increase the exposure to the darker object Shutter limited: min and max shutter range White Balance Control: automatically adjusts depending on the ambient light conditions including tungsten, indoor, fluorescents, or outdoor environments Mirror: video mirroring Flip: video flipping
23 Sense Up Auto Gain Control, AGC (Sense Up ): increase the gain of the video signal. If AG C cannot gain enough light, set the Sense Up feature. However, the Sense Up feature may cause motion blur at night 3D Noise Reduction: reduces noise at night Sense Up: slow shutter feature for increasing CMOS sensitivity at night No Sense Up 3 Fr ame Sense Up Chapter 5-2-2 MoonLight The MoonLight fe ature is for low-light and high sensitivity DSP control that enables outsta ndin g video quality in low-light environments. MoonLight technology can be used fo r both black-and-white and/or color video modes. To enable MoonLight , first enable the Au to Gain Control (AGC) setting. The combinational use of 3D noise reduction (3D DNR) can reduce noise in low light environments. AGC and 3D DNR do not cause motion blur. If the sensitivity is not good for the environment, the Sense Up feature can instead be used, however, this may cause motion blur in low light conditions.
24
Chapter 5-2-3 IR Cut Removable
The IR cut removable filter allows the user to schedule IR activation by (1) auto, (2) day,
(3) n
ight, or (4) schedule. When the setting is set to "Auto", the IR activation is
determined by the light sensor. The "Night" setting means that the IR cut filter is
removed. "Day" setting means that the IR cut filter is always on. When the activation
schedule is enabled, the IR cut filter can be scheduled based on specific time frames. For
example, a user can set the IR cut activation time starting from 19:00 pm (day to night
time) until 6:00 am (night to day time).
Chapter 5-2-4 Video Privacy Mask Each IP camera has four privacy masks. Select the mask number and drag the mask onto
the vid
eo area.
25
Chapter
5-2-5 Audio Setting
Audio setting is based on the following:
MIC
Volume: MIC or line input volume
Audio Input Mode: choose MIC input or Line input.
Audio Input Gain: voice input gain control
Audio Output Volume: line output volume adjustment
Audio Coding Type: G.711 u-Law
Sample Rate: audio sample rate
Bit Rate: audio bitrate.
Chapter 5-3 IP Network Advance
To block unauthorized IP addresses, click Advance->Network->IP Address Filtering.
Enter
the IP address and click “Add”. To delete the filtered IP address, click “Delete”.
Chapter 5-4 Event
For motion, audio, and network detection configuration, visit Advance->System->Event
for s
ummary report. To edit an event, click “Edit Event”.
26 Chapter 5-4-1 Motion Alarm, or Audio Detection Event For motion, digital input, or audio alarm notifications, users can configure event actions to sen d JPEGs to an FTP server, to send JPEGs to an email account, and/or trigger SD card recording for video. To schedule the event task, click “Schedule”. A weekly schedule box will appear. Edit as appropriate. Chapter 5-4-2 Motion Area Once the above information is set, configure the motion area of the monitored envir o nment. To configure a motion area, click on the video area.
27 Chapter 5-4-3 Audio Detection Event For audio supported models, the IP camera will have an audio detector that will detect the acous tic level. If the volume exceeds the audio sensitivity value, the audio detector will trigger an alarm and send a notification. Chapter 5-4-4 Alarm Input Detection Event To enable external alarm digital input via an IP camera, visit Advance->Event->Alarm Detectio n. Select NO/NC for the digital input.
28 · Alarm Notification— Enable alarm notification · Alarm Input Mode— Normal open/normal close for detecting alarm inputs Chapter 5-4-5 Network Loss Detection Event Chapter 5-5 Notification The alarm or motion notification feature can be triggered to send snapshots to an FTP accou nt or an email account. For alarm notification configuration, follow the instructions below: Chapter 5-5-1 FTP Notification To enable the alarm or motion sending FTP feature, setup the following FTP account inform ation. FTP server IP/DNS— IP address or domain name of the FTP server Acc ount— account of the FTP server
29 Password— password of the account Directory—file path for storing the JPEG snapshots Prefix—prefix of the JPEG filename Date format—date format string for the JPEG filename Postfix—postfix of the JPEG filename Chapter 5-5-2 SMTP Email Notification Alarm or motion notifications can be set to send a snapshot to an email account. To enab le alarm or motion sending email snapshots, setup an email account. Email receiver settings Email address— email address of the recipient Email sender setting Email address— email address of the sender SMTP server— sender’s SMTP server Authorization— SMTP server’s authorization option if applicable Authorization account— account of the SMTP server Authorization password— password of the account