Acumen Camera Dome Series AiPO24V45Y2B User Manual

Chapter 3 Start Using H.264 FULL HD AiP camera 
Network Features  After  login  H.264  FULL  HD  AiP  camera  as  administrator,  there  are two  main features—system  operation  and  configuration.  Operation  and  configuration features are described as follows:  Chapter 3-1 AiP camera Operational HTML Page  H.264 FULL HD Series operational HTML page layout 
 3.   
 1.  
 4.  2.  
  
 
  
 1. Control panel—AiP camera control panel.   2. AI  Universal  ActiveX  control—Display  RTSP  H.264  or  JPEG...

Chapter 3-2-1 ePTZ  To operate AiP camera DSP’s ePTZ, please enable ePTZ feature on the main page. A user can operate up, down, left, right, zoom in, zoom out, and presets on main page. 
 
 
 W hen ePTZ is off, AI Universal ActiveX control also provides ePTZ (electronically pan, tilt, and zoom) feature. To perform ActiveX ePTZ feature, please use a computer mouse to drag on the ActiveX control. 
 
 
  
 
  
 
  
 
 AI Universal ActiveX control becomes eZoom mode.  
 
  
 
  
 
  
 
 11  

Please use computer mouse pointing to the sub-window of PI P view. Dragging the sub-window can perform ePan and eTilt. Using mouse scroll button can perform zoom in and out features. 
 Performing right-mouse click on the video can disable ePTZ feature.  Chapter 3-2-2 Region of Interest (ROI)  For D1 and below resolution, ROI feature can apply to the main video stream. Main video stream remains the biggest video resolution such as 1080P. The sub-stream can be cropped and scaled based on the main video...

 Perform zoom in and out operations for ePTZ or ROI.   
Speed The PTZ speed of above operations.   
 Chapter 3-2-4 Two-way Audio  
 For two-way audio, please click on Microphone icon for speaking to the remote site. To stop speaking to the remote site, please click on Microphone icon again. 
 To listen to the remote site, please click Speaker icon for listening to the remote site. To stop listening to the remote site, please click on Speaker icon again. 
 Note: Only IP camera models with audio can...

Chapter 3-3-1 Server Settings  Server settings contain H.264 FULL HD AiP camera server’s system information such as MAC address, firmware version, users, system timer, and other system settings. To change or to use these options, please follow the instructions at this section. 
 
  
 
  
 
  
 
  
 
 Firmware Version  Firmware update allows a user to upgrade H.264 FULL HD AiP camera’s firmware remotely. A user can use firmware version to verify if the device has the latest version.  Device Nam e  The...

Chapter 3-3-2 User Settings  There are ten user accounts allowed for the system. Each account can be configured for its access rights. To add/edit a user, please click on Add/Edit User button. To access H.264 FULL HD AiP camera without authentication, set Bypass Logon radio button to ON. 
 
  
 
  
 
 To  change  account  name,  please  type  new  account  name  in  Account  edit  box.  To  change  new  password,  please  type the  new  password  in  the  New  Password edit  box.  Click  on  Submit...

Chapter 3-3-3 Timer  H.264 FULL HD AiP camera allows a user to change system timer via standard HTML web page. To change H.264 FULL HD AiP camera’s system timer, please enter the date and time in the edit boxes. Click on Submit button to apply this operation. 
 
  
 
  
 
 
 Synchronize with NTP  To synchronize Internet time system, check Auto Synchronize option to “Every Hour”.  H.264  FULL  HD  AiP  camera  synchronizes  its  system  timer  with  a  time server every hour.  Note: Network Time Protocol...

To update firmware of H.264 FULL HD AiP camera, please click on Firmware  
 
  
 
  
 
  
 
  
 
  
 
  
 
  
 
  
 
  
 
  
 
 
 17  

Update hyper link. Locate “flasham.bin” in your computer by clicking the Browse button. Click Submit button to finish firmware upgrade. To ensure the quality of transmission, please make sure that there is no user accessing H.264 FULL HD AiP camera during firmware upgrade. 
 
  
 
  
 
  
 Chapter 3-4 Network  H.264 FULL HD AiP camera provides Internet protocols including IP, DHCP, and DDNS.  A  user  can  configure  these  Internet  protocol  settings.  To  setup  above, please read the following...

 
  
 
 
 For Internet access configuration, please contact your local ISP for global IP address. Once the physical Internet connection gets installed, enter IP address (global), Subnet Mask, and Gateway IP from the ISP. 
  Default  DNS  IP  Address—First  Domain  Name  Server,  the  IP  address  of the domain name server  Second  DNS  IP  Address—Second  Domain  Name  Server,  the  IP  address of the domain name server, a backup DNS server for default DNS  PPPoE Account—Account name of PPPoE...