Acumen Camera Box Series AiPB53N User Manual
Here you can view all the pages of manual Acumen Camera Box Series AiPB53N User Manual. The Acumen manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 31
30 Chapter 3-8 Alarm Settings H.264 FULL HD AiP camera’s hardware alarm system contains motion detection, alarm sensors, and one alarm/relay output. Many alarm features such as motion/alarm email notification and FTP archiving can be found at this section. Chapter 3-8-1 Motion/Alarm Setup There are motion detection zones allowed in the H.264 FULL HD AiP camera. A user can enable the detection zones with different sensitivities ranging from 1 to 99 (highest to lowest) for motion detection....
Page 32
31 Chapter 3-8-4 Face Detection The video analytics contains face detection engine. There are up to 4 faces can be detected. Each face should be at least 1/20 out of the video size for recognition purpose. Once a face is detected, the alarm output, e-Mail with a snapshot, and/or an FTP snapshot can be triggered. Not detected 1/20 in size 1/10 in size
Page 33
32 Chapter 3-8-5 Audio Detection For audio model, the AiP camera has audio detector detecting acoustic level. If the volume exceeds the audio sensitivity value, audio detector triggers an alarm for notification. Chapter 3-8-6 Tampering Detection The AiP camera’s video analytics engine is able to detect tampering. Tampering detection works (1) lens spray paint prevention, (2) camera move prevention, and (3) out of focus prevention. To enable this feature, please set Enable option.
Page 34
33 Chapter 3-9 Audio Setting Audio setting is based on the following: MIC Volume: MIC or line input volume Audio Input Mode: Choose MIC input or Line input. Audio Input Gain: Voice input gain magnification Audio Output Volume: Line output volume adjustment Audio Coding Type: G.711 u-Law Sample Rate: Audio sample rate Bit Rate: Audio bit rate.
Page 35
34 Appendix Advance Network DDNS and PPPoE Technologies The advantage of using DDNS and PPPoE is to save the cost of IP address. H.264 AVC AiP camera’s PPPoE service gets a dynamic global IP address after system reboot. This IP address may get changed periodically. This is the address needed to access the video server over Internet. When ISP re-assigns a new IP address to H.264 AVC AiP camera, H.264 AVC AiP camera notifies DDNS service. A remote PC can access H.264 AVC AiP camera by...
Page 36
35 Advance Network Port Forwarding Technology Port forwarding technology is an advanced network technology which is widely used for using one global IP shared by many network devices. The network architecture is illustrated as below. Port 80 of the router (192.168.0.10) is assigned to the device IP address, 192.168.0.10. Port 81 of the router is assigned to the device IP address, 192.168.0.11. When Remote PC accesses the router’s port 86 (122.116.191.129), it eventually accesses the video...
Page 37
36 Specification Video compression H.264 and Motion JPEG, dual codec Resolution QXGA(2048 x 1536), 1080P(1920 x 1080), 720P(1280 x 720), D1(720 x 480), CIF(352 x 240) Multiple profile Up to H.264 2048x1536 15 FPS (Only 3MP AiP cameras provide) Up to H.264 1920x1080 30 FPS, H.264 720x480 30 FPS, JPEG 720x480 25 FPS, JPEG 352x240 25 FPS Up to H.264 1280x720 30 FPS, H.264 720x480 30 FPS, JPEG 352x240 25 FPS Up to H.264 1920x1080 30 FPS, H.264 720x480 30 FPS, JPEG 1280x720 25 FPS Up toH.264 1920x1080...