Acumen Camera Box Series AiPB34A User Manual

 
  
 
 
 Note: If you forget the password, please return the device to us. See appendix 
for emergency default. 
 
 
  
 
  
 
  
 
  
 
  
 
  
 
 
 21  

Chapter 5 Advance Settings 
 
  
 Chapter 5-1 System Settings  Chapter 5-1-1 User Setting  There  are  ten  user  accounts  allowed  for  the  system.  Each  account  can  be configured  for  access  rights.  To  add/edit  a  user,  click  “Add/Edit”  user.  To  access an AiP camera without authentication, set the Bypass “Logon” radio to ON. 
  
 
  
 
  
 
  
 
 To  change  the  account  name,  type  the  new  account  name  in  the  “Account”  box.  To change  the  password,  type  the  new  password...

 
  
 
Chapter 5-2 Advance Video and Audio Settings  Chapter 5-2-1 Advance Video Setting  To setup Exposure Control, Automatic Gain Control, W hite Balance Control, 
adjust the values accordingly. 
  
 
  
 
  
 
  
 To increase, the sensitivity at night, adjust the Moon Light feature.  Exposure Value: adjust the value of the image exposure  WDR: enable  or disable the  W ide Dyna mic Range feature  Black-light Compe nsation: increase the exposure to the darker object  Shutter limited: min a nd...

Moon Light function   Auto  Gain  Control,  AGC  (Moon  Light  function):  increase  the  gain  of  the video  signal.  If  AGC  cannot  gain  enough  light,  set  the  Moon  Light  feature. However, the Moon Light feature may cause motion blur at night  3D Noise Reduction: re duces noise at night  Moon  Light:  slow  shutter  feature  for  increasing  CMOS  sensitivity  at night  No Moon Light 3 Frame Moon Light  
  
 
  
 
 Chapter 5-2-2 Moon Light function  The  Moon  Light  function  feature...

Chapter 5-2-3 IR Cut Removable  The IR cut removable filter allows the user to schedule IR activation by (1) auto,  (2)  day,  (3)  night,  or  (4)  schedule.  W hen  the  setting  is  set  to  "Auto",  the  IR activation  is  determined  by  the  light  sensor.  The  "Night"  setting  means  that  the IR  cut  filter  is  removed.  "Day"  setting  means  that  the  IR  cut  filter  is  always  on. W hen  the  activation  schedule  is  enabled,  the  IR  cut  filter  can  be...

Chapter5-2-5 Audio Setting  Audio setting is based on the following:   MIC Volume: MIC or line input volume  Audio Input Mo de: c hoose MIC input or Line input.  Audio Input Gain: voice input gain contro l  Audio Output Vo lume: line  output vo lume adjustme nt  Audio Coding Type: G.711 u-La w  Sample Rate: a udio  sample rate  Bit Rate: a udio bitrate. 
 
 
  
 
  
 
  
 Chapter 5-3 IP Network Advance  To  block  unauthorized  IP  addresses,  click  Advance->Network->IP  Address...

 
  
 Chapter 5-4-1 Motion Alarm, or Audio Detection Event  For  motion,  digital  input,  or  audio  alarm  notifications,  users  can  configure  event actions  to  send  JPEGs  to  an  FTP  server,  to  send  JPEGs  to  an  email  account, and/or  trigger  SD  card  recording  for  video.  To  schedule  the  event  task,  click “Schedule”. A weekly schedule box will appear. Edit as appropriate. 
 
 
  
 
  
 
  
 
  
 
 Chapter 5-4-2 Motion Area  Once the above information is set, configure the motion...

 
  
 
  
 
 
 Chapter 5-4-3 Audio Detection Event  For  audio  supported  models,  the  AiP  camera  will  have  an  audio  detector  that  will detect  the  acoustic  level.  If  the  volume  exceeds  the  audio  sensitivity  value,  the audio detector will trigger an alarm and send a notification. 
 
 
  
 
  
 
  
 
  
 
 Chapter 5-4-4 Alarm Input Detection Event  To enable external alarm digital input via an AiP camera, visit 
Advance->Event->Alarm Detection. Select NO/NC for the digital input.  28  

 Alarm Notification—Enable alarm notification  Alarm Input Mode—Normal open/normal close for detecting alarm inputs   
 
 
 
Chapter 5-4-5 Network Loss Detection Event  
  
 
 
 
Chapter 5-5 Notification  The alarm or motion notification feature can be triggered to send snapshots to an FTP  account  or  an  email  account. For  alarm  notification configuration,  follow  the instructions below: 
 Chapter 5-5-1 FTP Notification  To  enable  the  alarm  or  motion  sending  FTP  feature,  setup  the...

 Password— password of the account  Directory—file path for storing the JPEG sna pshots  Prefix—prefix of the JPEG file na me  Date format—date  format string for the  JPEG file na me  Postfix—postfix of the JPEG filena me 
 Chapter 5-5-2 SMTP Email Notification  Alarm or motion notifications can be set to send a snapshot to an email account. 
To enable alarm or motion sending email snapshots, setup an email account. 
 
 
  
 
  
 
  
 
  
  Email receiver settings 
Email address— email...