Home > Acumen > Camera > Acumen Camera AiPK34NA6Y2B User Manual

Acumen Camera AiPK34NA6Y2B User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Acumen Camera AiPK34NA6Y2B User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 53 Acumen manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							 30 
    Chapter 5-5-3 Event Triggering SD Card Recording 
    To  record  video  onto  an  SD  Card,  insert  an  SD  card  into  the  SD  card  slot.  Enable  the  SD 
    card  
    
    recording feature. The IP camera will start to record video to the SD card. 
    Chapter 5-5-4 SD Card Recording Setting 
    For 
     SD card recording settings, see the below: 
     
     
     
      SD Recording: enable SD card recording 
      Rec
    
    ording Format: recording resolution 
      SD System Status: SD Linux mounting status 
      SD Card State: SD card inserting status 
      SD Card Total Space: SD card total capacity 
      SD Card Free Space: SD card free space 
     
    To un-mount the SD card, click “un-mount SD Card”. The sy
     stem may crash if the SD 
    card is a not un-mounted properly. 
     
    To download the SD card AVI recoding clips, click Advance->System->SD Card Backup 
    File. Right mouse click the required files and save the AVI them to a local PC.  
        
    						
    							 31 
    Appendix   
    Advance Network DDNS and PPPoE Technologies 
    The advantage of using DDNS and PPPoE is to remove the costs associated with paying 
    for  a  s
     tatic  IP  address.  H.264  AVC  IP  camera’s  PPPoE  service  will  provide  a  dynamic 
    global IP address after the system reboot has been carried out. This is the address needed 
    to  access  the  video  server  over  Internet.  The  IP  address  may  get  changed  periodically. 
    When  ISP  re-assigns  a  new  IP  address  to  the  H.264  AVC  IP  camera,  the  IP  camera 
    notifies the DDNS service. A remote PC can access the H.264 AVC IP camera by typing 
    the domain name in a browser. The domain name gets resolved by the DDNS service and 
    gets translated to its dynamic  global IP address. The dynamic  global  IP address can now 
    be accessed by the remote PC. 
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
    SD Card
    
     Compatibility List 
    Manufacturer  Size SDHC
     /SDSC Sandisk 8 / 16 / 32 GB  SDHC Transcend 8 / 16 / 32 GB  SDHC 
    DDNS Server 
    2.ISP assigns global IP to IP CAMERA 
    Int
    
    ernet 
    4.    Access IP CAMERA using 
    the dynamic global IP 
    address. 
    ISP 
    Remote PC 
    5.  Resolve domain name to IP       address and sent back to 
    remote PC. 
    1.  Get IP address from ISP after reboot. 
    2.  Notify DDNS server for the new IP address if 
    FAST DOME CAMERA gets reboot or assigned a new IP address.     
    						
    							 32 
    Specification 
     
     
    Video 
    compression H.264 and Motion JPEG, dual codec 
    Resolution  1080P(1920 x 1080), 720P(1280 x 720), D1(720 x 480), CIF(352 x 240) H.264 : up to 15 fps @ 1920 x 1080 , 30fps @ 1280 x 720 , 30fps @ 720 x 480 Maximum frame 
    rate 
    Motion JPEG : up to 15 fps @ 1920 x 1080 , 30 fps @ 720 x 480 , 30 fps @ 352 x 240 
    Streaming   Triple Streaming Video streaming  RTSP: RTP/HTTP, RTP/TCP, RTP/UDP 
    Video bitrate 5Mbps to 128Kbps 
    Change frame rate and bitrate on-the-fly 
    CBR/VBR/GOP supported 
    Security Base64 HTTP encryption 
    Multiple user access levels with password protection 
    10 user accounts available 
    Users 
    8 simultaneous users OSD    Text overlay for camera name, date and time Privacy mask  Four masks 
    Alarm/motion Audio detection 
    Motion detection   
    External digital input alarm (applicable for only digital input models) 
    Image upload over FTP and email by above alarm signals 
    CPU, memory  Embedded SoCARM11 CPU at 528Mhz, 256 MB DDR, 256 MB flash memory IR cut removable  Auto, day , night, scheduling, day & night models only Alarm input  TTL input +3VDC to +5VDC, alarm input models only Alarm output  DC 24V 1A, dry-contact (N.O.), alarm output models only Maintenance  Firmware update via HTTP, Firmware available at web site Network interface  10Mbps/100Mbps, RJ-45 Two-way audio  G.711 16Kbits u-Law, audio model only 
    PC requirement OS: Windows 2000, Windows XP, Windows Vista, Windows 7 
    Browser: Windows Internet Explorer 6.0 or above 
    CPU: Intel Pentium 4 1.8GHz or above 
    RAM: 1GB or above 
    Network protocols 
    IP,  TCP,  UDP,  HTTP,  SMTP,  NTP,  DDNS,  UPnP,  FTP,  ARP,  DHCP,  PPPoE,  DNS,  RTSP, 
    RT
    CP, Telnet, ONVIF, ICMP 
    Mobile phone & 
    PDA    Support iPhone, iPad, and Android 
    System integration  ONVIF and HTTPAPI   CMS
                           AiM   HD 2.6 support OS  Embedded Linux 2.6.32 
     
      
    						
    All Acumen manuals Comments (0)

    Related Manuals for Acumen Camera AiPK34NA6Y2B User Manual