Acoustic Energy Loudspeaker Neo V2 Sub User Manual

O w n e r s   M a n u a l
O NE
T H R E E
C E N T R E
S U B   W O O F E R
S E R I E S 

3 .   I n s t a l l a t i o n
Thank you for purchasing this Acoustic Energy product. As a valued customer 
we would like to keep you up to date with all news and events including new 
products, exhibitions and exclusive promotions. To enable us to communicate 
these exciting developments please go to our website - www.acoustic-energy.co.uk 
- and complete the ownership registration form.
Perhaps more than any other hi-fi product, speakers are sensitive to installation 
so please take a little time to...

Page 
3 .   I n s t a l l a t i o n
The Aegis Neo Subwoofer is intended to be used in 
either stereo audio music systems or multi-channel 
audio-visual (home theatre) systems. Although it is 
intended primarily to partner other products in the 
Aegis Neo range it may also be used successfully with 
alternative loudspeakers.
The Aegis Neo Subwoofer should be fitted with either 
floor spikes or rubber feet. Floor spikes offer the 
highest potential performance and should be fitted 
if the subwoofer...

Page 
D i a g r a m   O n e6 .   C o n t r o l s   a n d   S y s t e m   S e t u p
The Aegis Neo Subwoofer requires connection both to mains power and an 
appropriate audio signal. The connection sockets are located on the back panel 
illustrated opposite in Diagram Two. Leave the subwoofer switched-off at the 
mains until all connections are made and ensure that the Volume Level control, 
also located on the back panel, is turned fully anti-clockwise. Connecting your 
Aegis Neo Subwoofer to an...

Page 3
D i a g r a m   O n e6 .   C o n t r o l s   a n d   S y s t e m   S e t u p
Subwoofer Controls
Accompanying the mains and signal input sockets on 
the subwoofer connection panel are a Power switch, a 
Volume Level control, a Crossover Frequency control, 
a Phase control and Notch Frequency, Slope and 
Level controls. Their functions are described in the 
following paragraphs. Use of the controls to setup and 
adjust the subwoofer is described in the System Setup 
paragraphs.
Power 
The power...

Page 4Page 4
6 .   C o n t r o l s   &   S y s t e m   S e t u p8 .   T h e   A e g i s   N e o   R a n g e
7. Specification
Type: Closed box, active subwoofer.
Drivers: 0mm pulp cone with 48mm thermally 
bonded voice coil. High-power long-throw magnet 
system.
Low Frequency Cut-off: - 6dB @  6Hz
Amplifier: 00 Watts into 8 Ohms
Low Pass Filter: Variable  nd order, 45Hz to  50Hz
Phase: Variable 0° to 80°
Notch Filter: Variable. Frequency: 40 to  00Hz, Q: .5 to...

Page 5
6 .   C o n t r o l s   &   S y s t e m   S e t u p8 .   T h e   A e g i s   N e o   R a n g e
9 .   W a r r a n t y
1 0 .   C o n t a c t
The Aegis Neo Subwoofer is part of a range that 
includes the Aegis Neo One stand-mount speaker, the 
Aegis Neo Three floor-stand speaker and the Aegis Neo 
Centre centre channel speaker. 
Aegis Neo One 
Aegis Neo One is a compact high resolution two-way 
stand-mount speaker.
Aegis Neo Three 
Aegis Neo Three is  .5-way floor stand speaker that 
builds on...

Acoustic Energy Limited, 6 Bridge Road, Cirencester, Gloucestershire GL7  NJ. 
Tel: +44 (0)85 65443 (Sales), +44 (0)85 656890 (Technical). Fax: +44 (0)85 654430
 
Email: [email protected] 
Web: www.acoustic-energy.co.uk
Manual Part No. MA308
O NE
T H R E E
C E N T R E
S U B   W O O F E R
S E R I E S