Home > Acoustic Energy > Loudspeaker > Acoustic Energy Loudspeaker Aego 5 User Manual

Acoustic Energy Loudspeaker Aego 5 User Manual

Here you can view all the pages of manual Acoustic Energy Loudspeaker Aego 5 User Manual. The Acoustic Energy manuals for Loudspeaker are available online for free. You can easily download all the documents as PDF.

Page 1

English
3
OWNERS
MANUAL
Designed by KOI Inc (USA) Exclusively for Acoustic Energy Limited (UK)
Manufactured in Malasyia.
Acoustic Energy Limited, 16 Bridge Road, Cirencester, Gloucestershire GL7 1NJ. UK
Tel: +44 (0)1285 654432   Fax: +44 (0)1285 654430 
www.aego5.com
Satellite Speakers:A patented advanced technology driver featuring a unique heat
transfer system: special high excursion suspension and a
computer-designed anti-resonant cone
Inputs:3 x RCA Phono - Line level
1 x Stereo Mini jack - Line...

Page 2

The Acoustic Energy AEGO5 is a powered 5.1 surround sound
speaker system designed to give maximum acoustic
performance with minimal visual impact. It will enable you to
fill your room with sound rather than speakers and get the best
from your AV surround system.
This manual will help you to get the best out of your AEGO5
system and explain how to link it up with your existing digital
decoder (AEGO5) or straight to your DVD player through the
Acoustic Energy Aego decoder (AEGO
P5). 
Section one 
- will...

Page 3

As with all loudspeakers, the placement in
relationship to room boundaries (walls etc.) will have
a major effect on their overall performance. As the
Aego Satellites are so small your choice of positions
is far greater and you should use this to maximize
the performance of these remarkable little speakers.
If a speaker is positioned in free air (not close to any
walls etc.) then it will sound brighter. If mounted on
or close to a large object (such as a table or on a
wall) then the mid range will become...

Page 4

1. After properly connecting AEGOP5 to your audio sources and amplifier, plug in AEGOP5’s AC adapter to an AC outlet.
2. Turn on the power of AEGO
P5 by pushing the POWER button on the front panel. Turn on the power of all audio
sources, amplifier, or powered subwoofer.
3. Installation is now complete, get ready to experience true Dolby Digital or DTS surround sound. 
Note: To prevent damage to speakers, when playing music or a movie, ensure the volume is set low initially. 
Gradually turn the volume up...

Page 5

1 POWER Button
On/off key
2 INPUT MODE Button
Select from the 5 different source inputs 
3 TEST Button
Test signal for the 6 discrete channels
4 MUTE Button
Mute the sound (toggle on and off)
5 PRO LOGIC Button
Select from 4 different surround settings
6 DELAY Button
Select the desired channel to engage the time
delay adjustment
7 BALANCE Button
Set the volume setting for each of the 6 channels
8 EQ SETUP Button
Select up to 5 EQ Band Settings
9 EQ ON/OFF Button
Activate the selected EQ Band Setting
10...

Page 6

AEGOP5 Operation 
- Test Mode
Test Mode
After connecting up to your source
and speakers, you can press the
TESTbutton on the remote to test the
system. You can also use the test
mode to test the location of the
speakers. When the 
TESTbutton is
pressed, white noise is generated
through all satellite speakers in an
order of Front Left, Centre, Front
Right, Rear Left, and Rear Right
channels for 2 seconds each. When
completed, the AEGO
P5 returns to
Auto Decode mode.
When test mode is running, the display...

Page 7

AEGOp5 Operation 
- Pro Logic Mode
Pro Logic Mode
Your AEGOP5 will automatically switch to
Pro Logic mode when it detects a Pro Logic
signal. With other types of input signal, you
can select the Dolby Pro Logic mode
manually by pressing 
Pro Logicbutton on
the remote. Repeatedly pressing the 
Pro Logic Button will switch the Pro Logic
mode in between the following modes;
AUTO, ALL PCM, ENABLEand DISABLE.
If a Pro Logic signal is detected, AEGO
P5 will switch to Pro Logic
mode automatically, and the...

Page 8

Press the EQ SETUPbutton to display the current 
setting of EQ Band 1.
Press the 
EQ SETUPbutton again to select next EQ Band.
Press the 
Vol+or Vol- button to increase or decrease 
the volume for current EQ Band.
Press 
EQ SETUPbutton to store the new EQ setting.
Press 
EQ ON/OFFbutton to switch the new EQ settings on or off.
AEGOp5 Operation - DRC
(Dynamic Range Compression)
DRC
Your AEGOP5 features Dynamic Range
Compression (DRC), its sophisticated
technology creates realistic sound fields
with richly...
Start reading Acoustic Energy Loudspeaker Aego 5 User Manual

Related Manuals for Acoustic Energy Loudspeaker Aego 5 User Manual

All Acoustic Energy manuals