Acoustic Energy Loudspeaker Aego 150Ci User Manual

INSTALLATION and OWNERS MANUAL
C U S TO M   I N S TA L L   S E R I E S   

Page 
Thank you for purchasing this Acoustic Energy product. As a valued customer we 
would like to keep you up to date with all news and events including new products, 
exhibitions and exclusive promotions. To enable us to communicate these exciting 
developments please go to our web site - www.acoustic-energy.co.uk - and 
complete the ownership registration form.
Perhaps more than any other audio product, speakers are sensitive to installation 
so please take a little time to read this manual and...

Page 2
Mono audio is usually preferable in utility applications but if only stereo is available 
multiple speakers in the same room or zone should be connected alternately to the 
left and right channels.
In choosing locations for the speakers consider the “coverage” required with respect 
to the likely listener positions. Try to ensure that coverage is even and that as 
listeners move around the environment the sound from one speaker is gradually  
“replaced” by the sound from the next nearest speaker....

Page 3
2 .   I n - c e i l i n g   S p e a k e r   P o s i t i o n i n g
Aego Custom Install In-ceiling speakers are intended to be used in high quality 
distributed audio systems or as surround speakers in home-theatre systems.
The location of speakers within a listening environment is likely to have more 
influence over their subjective performance than any other aspect of installation. It 
is worth spending some time considering both the finer points of speaker location, 
as well as the larger scale...

Page 4
Connect positive
Connect negative
D i a g r a m   T w o
2 .   I n - c e i l i n g   S p e a k e r   P o s i t i o n i n g3 .   I n - w a l l   a n d   I n - c e i l i n g   S p e a k e r   C o n n e c t i o n
Connecting Aego Custom Install speakers to an amplifier is fundamentally a simple 
process. However, there are some choices to be made and issues to consider 
concerning speaker cable type. Each speaker is fitted with spring connection 
terminals designed to accept stripped wires.
Two...

Page 5
Do not paint grilles while they are fitted and take care that a significant number of 
grille perforations do not become blocked. Remove the logo badge and the “scrim” 
cloth attached to the back of the grilles (do not paint the back of the grille). Use the 
wax paper sheet to protect the scrim. When the paint is dry replace the scrim cloth 
by pressing it in to place on the back of the grille. Fit (or refit) the grille by aligning it 
with its retaining groove and gently pushing-in from its...

Page 6
4 .   I n - w a l l   a n d   I n - c e i l i n g   S p e a k e r   I n s t a l l a t i o n4 .   I n - w a l l   a n d   I n - c e i l i n g   S p e a k e r   I n s t a l l a t i o n
Before using your Aego Custom Install speakers for the first time make one 
final check of the cables and connections. If all appears well begin listening at 
a relatively low level to confirm that the system is operating as expected. Only 
increase the volume if you are happy with the sound at low levels. If you are...

Acoustic Energy Limited, 16 Bridge Road, Cirencester, Gloucestershire GL7 1NJ. 
Tel: +44 (0)1285 654432 (Sales), +44 (0)1285 656890 (Technical). Fax: +44 (0)1285 654430 
Email: [email protected] 
Web: www.acoustic-energy.co.uk
Manual Part No. MA3202
C U S TO M   I N S TA L L   S E R I E S