Acoustic Energy Loudspeaker Aegis One User Manual
Have a look at the manual Acoustic Energy Loudspeaker Aegis One User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 85 Acoustic Energy manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Owner’s manual AEGIS one manual 5/7/99 8:57 am Page 1
Congratulations on choosing the Acoustic Energy AEGIS ONE — a powerful compact two- way loudspeaker which features metal diaphragm technology and is capable of out- standing performance. Please take a few moments to read this manual. The advice it contains will enable you to get the very best performance out of your Acoustic Energy loud- speakers. The AEGIS ONE utilises metal cone mid-bass drive unit technology, proven in the AE Reference series. The rigid anodised alloy cone ensures pure piston action and also acts as a heat sink for the bonded voice coil. These features provide exceptional clarity, transparency dynamics and power handling. The tweeter — or treble driver — is a high-quality silk fabric dome unit integrating smoothly with the rest of the system. Both drive units are fully magnetically shielded so that the speakers can be used in close prox- imity to a TV screen or monitor for AV applications. AEGIS ONE loudspeaker uses quality OFC internal wiring which enhances detail and transparency. For exceptional results use AE UPOCC speaker cable which is available from AE dealers and distributors.The AEGIS ONEs are best heard with the tweeters at, or just below, ear height when the listener is seated. For serious listening the grilles are best removed. Rigid support is essential for the speaker to develop its full detail and dynamic performance. Rigid stands with spikes, cones or other methods of secure mounting are recommended. ‘Free-field’ stand mounting gives improved stereo separation and depth. If AEGIS ONEs are shelf mounted the support must be firm; cones are still recommended beneath the cabinets. Closeness to room boundaries has a major impact on the low frequency performance. The speakers should be kept away from corners (which will produce booming). The speakers can be positioned fairly close to a back or side wall but should not be the same distance off the ground as from the rear or side wall. Experiment with the best position to achieve a full, yet clean bass response. Trust your judgement and ears. For best stereo imaging the speakers should be as far apart as they are from the listening position. Introduction Positioning AEGIS one manual 5/7/99 8:57 am Page 2
AMPLIFIERLEFT SPEAKER R L Power Handling 20 – 120 watt Impedance 8 ohmSerial NumberDESIGNED AND ENGINEERED BY ACOUSTIC ENERGY LIMITED, ENGLAND MADE IN MALAYSIA MAIN Check that your amplifier is switched off before installing your loudspeakers. Failure to do so may result in speaker or amplifier damage. The diagram illustrates one loudspeaker only. The positive (ribbed) cable from the amplifier positive (or red) terminal should connect with the positive (red) terminal on the loudspeaker. Similarly the negative (smooth) cable should connect the amplifier negative terminal (black) to the negative terminal (black) on the loudspeaker. After wiring up: Lower the volume to minimum, switch on the amplifier, select the signal source and then raise the volume to the listening level required. Connection AEGIS one manual 5/7/99 8:57 am Page 3
Specifications HF unit25 mm silk fabric dome, anti- reflection pole. Ferrofluid cooled and damped. Magnetically shielded MF/LF unitPure piston 130 mm AE driver with 32 mm coil, high-power, long-throw magnet system and lightweight alloy cone. Magnetically shielded Crossover2 nd/3rdorder at 2.8 kHz. High- power inductors and polyester capacitors. OFC wire to drive units Power handling20 – 120 watt max Overall frequency response38 Hz – 22 kHz Frequency response ±3 dB50 Hz – 20 kHz Sensitivity90 dB/1 w/1 m Impedance8 ohm Cabinet25 mm MDF low diffraction front baffle. 15mm MDF enclosure. Full internal bracing. High-power, gas-flowed, low-turbulence bass reflex port. TerminalsGold-plated 2-way binding posts Weight (excl. packaging)7 kg each Dimensions (WxHxD)192 x 362 x 235 mm Warranty Your Acoustic Energy loudspeakers are guaranteed against original defects in materials, manufacture and workmanship for 3 years from the date of purchase. Please retain all original packaging materials for possible future use. We suggest that you complete details of purchase now and keep this information in a safe place for future reference. Under this warranty Acoustic Energy agrees to repair any defect or, at the company’s discretion, replace the faulty component(s) without charge for parts and labour. This warranty does not imply any acceptance by Acoustic Energy or its agents for consequential loss or damage and specifically excludes fair wear and tear, accident, misuse or unauthorised modification. This warranty is applicable in the United Kingdom only and does not in any way limit the customer’s legal rights. Claims and enquiries under the warranty for AE products purchased outside the UK should be addressed to the local importers or distributors. If you have reason to claim under the warranty please contact your dealer in the first instance. Dealer’s name:........................................................................................ Address: .................................................................................................. ................................................................................................................ ................................................................................................................ Date of purchase: ................................................................................... Serial numbers: ......................................................................................Acoustic Energy Limited 16 Bridge Road, Cirencester Gloucestershire GL7 1NJ Tel +44 (0)1285 654432 Fax +44 (0)1285 654430 AEGIS one manual 5/7/99 8:57 am Page 4