Home
>
Acoustic Energy
>
Loudspeaker
>
Acoustic Energy Loudspeaker Aegis Evo Compact Sub User Manual
Acoustic Energy Loudspeaker Aegis Evo Compact Sub User Manual
Here you can view all the pages of manual Acoustic Energy Loudspeaker Aegis Evo Compact Sub User Manual. The Acoustic Energy manuals for Loudspeaker are available online for free. You can easily download all the documents as PDF.
Page 2
Congratulations on choosing the AEGIS Compact Sub — a powerful, active subwoofer loudspeaker which is capable of outstanding Hi-Fi and Home Cinema performance. Please take a few moments to read this manual. The advice it contains will enable you to get the very best performance out of your Acoustic Energy loudspeaker. The AEGIS Compact Sub is capable of handling 150 watts RMS with a clean bass response extending to 25Hz in the listening environment. Flexibility in it’s operation and connection mean the...
Page 3
1. POWER SWITCH Switches the power ON and OFF. By switching to AUTO the power is automatically switched ON when a signal is applied to an input. 2. POWER INDICATOR LIGHT This indicator lights green when the power is switched ON, and lights red when in STANDBY mode. 3. POWER CORD SOCKET Connect the cord supplied to a 110–120V or 220–240V AC mains power outlet. 4. CROSSOVER FREQUENCY KNOB Adjusts the balance at the crossover point between the bass (low frequencies) from the AEGIS Compact Sub and the...
Page 4
The AEGIS Compact Subwoofer is virtually omni-directional, so it can be positioned in almost any location in the room. For the best performance in the ideal room the AEGIS Compact Sub should be positioned in a corner of the room or near a back wall. In certain circumstances the addition of a second AEGIS Compact Sub located in another position in the room helps to achieve a more uniform bass. The use of two subwoofers often provides a greater than expected increase in sound quality and bass dynamics,...
Page 5
Connections 2. For use with amplifiers having Line level pre-amp jacks The pre-amp outputs of your amplifier can be connected to the line level inputs on the AEGIS Compact Sub. The line level outputs on the AEGIS Compact Sub are then connected back to the power amp (main) inputs on your amplifier. This provides the greatest power handling for the stereo speakers. 3. For use with amplifiers not having either a Subwoofer Out jack or Line level pre-amp jacks Using speaker cable from the speaker terminals...
Page 6
Connections 4. For use with televisions with a variable audio output (diagram above) Some of the latest televisions are equipped with variable audio outputs. These can be connected directly to the Line level inputs on the AEGIS Compact Sub to enhance the bass response of the television’s built-in speaker. OPTION: 5. For use with two AEGIS Compact Subwoofers Using parallel speaker cables from the speaker terminals on your amplifier connect to the High Level speaker inputs on the corresponding left/right...
Page 7
How to use the controls How to use the SUB VOLUME CONTROL knob, CROSSOVER FREQUENCY knob and PHASE switch The VOLUME CONTROL, FREQUENCY knob and PHASE switch can be adjusted to match the condition of the listening room and/or the characteristics of the left and right front speakers. Due to the positioning of the subwoofer in the room and the associated room boundaries, the available bass response from the existing speakers and whether or not the filtered connection (nominally 100Hz is used), the actual...
Page 8
Power amplifier150 watts rms into 8 ohms Drive unit One front facing 220 mm pulp cone bass unit S/N ratio>75 dB Power handling150 watts programme rating Crossover frequency range35 Hz – 100 Hz active/passive ConnectionsLine level gold-plated RCA phono jacks 5-way binding posts Cabinet Precision engineered, low resonance 25 mm/36 mm MDF throughout, with front-facing drive unit in a sealed enclosure Cabinet finish Black Ash vinyl GrillePrecision engineered, protective grille (non-removeable) Weight...
Page 9
Your Acoustic Energy loudspeaker is guaranteed against original defects in materials, manufacture and workmanship for 3 years from the date of purchase. Please retain all original packaging materials for possible future use. Under this warranty Acoustic Energy agrees to repair any defect or, at the company’s discretion, replace the faulty component(s) without charge for parts and labour. This warranty does not imply any acceptance by Acoustic Energy or its agents for consequential loss or damage and...