Acer Xs W10 Users Guide

11
EnglishAdjusting the Projected Image
Adjusting the Height of the Projected Image
The projector is equipped with an elevator foot for adjusting the image height.
To raise the image:
1 Press the elevator button.
2 Raise the image to the desired height angle, then release the button 
to lock the elevator foot into position.
3 Use Tilt adjusting wheel to fine-tune the display angle.
To lower the image:
1 Press the elevator button.
2 Lower the image to the desired height angle, then release the button 
to...

12
English
How to Optimize Image Size and Distance
Consult the table below to find the optimal image sizes achievable when the 
projector is positioned at a desired distance from the screen.
•S1110/T200/XS-S10/S1210/T210/XS-X10/S1210Hn/S1213/T212/XS-X13/
S1213Hn/T212DT/XS-X13HG
If the projector is 1 m from the screen, good image quality is possible for image 
sizes around 81.
Note: Remind as below figure, the space of 160 cm height is 
required when located at 1 m distance.
Desired
Distance 
(m)
< A...

13
English•S1310W/T220/XS-W10/S1310WHn/S1313W/S1313WHn
If the projector is 4 m from the screen, good image quality is possible for image 
sizes around 379.
Note: Remind as below figure, the space of 510 cm height is 
required when located at 2 m distance.
Desired
Distance 
(m)
< A >Screen Size
Diagonal 
(inch)
< B >W (cm) x H (cm)From base to 
top of image 
(cm) 
< C >
0.5 47 102 x 64 70
1 95 204 x 128 140
0.5 142 306 x 191 210
2 189 408 x 255 281
2.5 237 510 x 319 351
3 284 612 x 383 421
3.5 332 714 x...

14
English
How to Get a Preferred Image Size by Adjusting 
Distance and Zoom
The table below shows how to achieve a desired image size by adjusting either 
the position or the zoom ring.
•S1110/T200/XS-S10/S1210/T210/XS-X10/S1210Hn/S1213/T212/XS-X13/
S1213Hn/T212DT/XS-X13HG
To obtain an image size of 50 set the projector at a distance 0.6 m from the 
screen.
Desired Image Size Distance (m) Top (cm)
Diagonal (inch)
< A >W (cm) x H (cm)Max zoom
< B >Min zoom
< C >From base to top of 
image < D >
30 61 x 46...

15
English
•S1310W/T220/XS-W10/S1310WHn/S1313W/S1313WHn
To obtain an image size of 50 set the projector at a distance 0.5 m from the 
screen.
Desired Image Size Distance (m) Top (cm)
Diagonal (inch)
< A >W (cm) x H (cm)Max zoom
< B >Min zoom
< C >From base to top of 
image < D >
30 65 x 40 0.3 0.3 44
40 86 x 54 0.4 0.4 59
50108 x 670.50.574
60 129 x 81 0.6 0.6 89
70 151 x 94 0.7 0.7 104
80 172 x 108 0.8 0.8 118
90 194 x 121 0.9 0.9 133
100 215 x 135 1.1 1.1 148
120 258 x 162 1.3 1.3 178
150 323 x 202 1.6...

16
English
User Controls
Installation Menu
The Installation menu provides an onscreen display (OSD) for projector 
installation and ma intenance. Use the OSD only when the message No 
signal input is disp layed on the screen. 
1 Turn on the projector by pressing   (POWER) on the control panel or  remote control.
2 Press MENU on the control panel  or remote control to launch the 
OSD for projector install ation and maintenance.
3 The background pattern acts as a guide to adjusting the calibration  and...

17
EnglishAcer Empowering Technology
Empowering KeyAcer Empowering Key provides three 
Acer unique functions: Acer eView 
Management, Acer eTimer 
Management, and Acer ePower 
Management. Press   for more 
than one second to launch the 
Onscreen Display main menu to modify 
its function.
Acer eView ManagementPress   to launch Acer eView 
Management.
Acer eView Management is for 
display mode selection. Please refer to 
the Onscreen Display (OSD) Menus 
section for more details.
Acer eTimer...

18
English
Onscreen Display (OSD) Menus
The projector has multilingual Onscreen Display (OSD) menus that allow 
you to make image adjustments and change a variety of settings.
Using the OSD menus
•To open the OSD menu, press MENU on the control panel or remote 
control.
•When the OSD is displayed, use   to select an item in the main menu. 
After selecting the desired main menu item, press   to enter a submenu 
for feature setting.
•Use   to select the desired item and adjust the settings by using 
....

19
EnglishColor
Display ModeThere are many factory presets optimized for various types 
of images.
•Bright: For brightness optimization.
•Presentation: For meeting presentation with higher 
brightness.
•Standard: For common environment.
•Video: For playing video in a bright environment.
•Picture: For graphic picture.
•Game: For game content.
•Education: For education environment.
•User: Memorize user’s settings.
Wall ColorUse this function to choose a proper color according to the 
wall. There are...

20
English
Note: Saturation and Tint functions are not supported under computer 
mode.
Color 
TemperatureAdjusts the color temperature. At higher color 
temperatures, the screen looks colder; at lower color 
temperatures, the screen looks warmer.
DegammaEffects the representation of dark scenery. With greater 
gamma value, dark scenery will look brighter.
Color RAdjusts the red color.
Color GAdjusts the green color.
Color BAdjusts the blue color.
SaturationAdjusts a video image from black and white to...