Acer Xb270hab Users Guide

							EN-13
User controls
 Power Switch / Power LED:  Turns the monitor ON or OFF by pressing the power switch (key no. 2 above). The LED lights up to indicate the power is turned ON.
Using the Shortcut Menu
Press any function key to open the shortcut menu. The shortcut menu lets you quickly select the most commonly accessed settings. 
 Empowering:  Press the Empowering Key to open the Acer eColor Management  OSD and access the scenario modes. 
Brightness : Press this key to open the Brightness control and set it to your preferred level. 
Overdrive : Press this key to activate the Overdrive function and set it to either Normal or Extreme mode. 
ULMB : Press this key to open the ULMB function and set it to your preferred setting. 
MENU  OSD functions Press this key to activate the OSD menu.
  
   
						

							EN-14
Acer eColor Management
•Operation instructions 
1 Press the   Key to open the Acer eColor Management OSD and  
access the scenario modes. 
2 Press   or   to select a mode. 3 Press the Auto Key to confirm the mode and exit the eColor menu.
•Features and benefits
Main menu icon
Sub Menu icon
Sub menu itemDescription 
N/A User mode User defined. Settings can be fine-tuned to  suit any situation. 
N/A ECO mode Adjusts the settings to reduce power  consumption. 
N/A Standard  mode Default Setting. Reflects native display  capability 
N/A Graphic mode Enhances colors and emphasizes fine detail.  Pictures and photographs appear in vibrant colors with sharp detail. 
N/A Movie mode Displays scenes in clearest detail. Presents  great visuals, even in unsuitably lit environments.
 
						

							EN-15
Adjusting the OSD settings
Note: The following content is for general reference only. Actual  product specifications may vary. 
The on-screen display (OSD) can be used for adjusting the settings of your LCD  Monitor. Press any MENU key to open the OSD. You can use the OSD to adjust picture quality, OSD position and general settings. For advanced settings, please refer to following pages:
Adjusting Brightness
Open the Brightness control and adjust the brightness level using the adjustment arrows. When you are done, use Exit to go back one level.
Adjusting the Overdrive setting
Open the Overdrive control and select the overdrive setting using the adjustment arrows. When you are done, use Exit to go back one level.
 
						

							EN-16
Adjusting picture quality
1 Press any MENU key to bring up the OSD. 
2 Using the   /   keys, select   Picture from the OSD then navigate to the  
setting you want to adjust.  
3 Use the   /   keys to adjust the setting. 
4 You can use the Picture menu to adjust Color settings, Brightness, Contrast,  the Gamma setting and Color Temperature.
 
						

							EN-17
Adjusting OSD settings
1 Press any MENU key to bring up the OSD. 
2 Using the directional keys, select   OSD then navigate to the setting you  
want to adjust.
 
						

							EN-18
Adjusting miscellaneous settings
1 Press any MENU key to bring up the OSD. 
2 Using the   /   keys, select   Setting from the OSD, then navigate to the  
setting you want to adjust. 
3 The Setting menu can be used to adjust the screen Menu Language and other  important settings including Input, Overdrive level, ULMB and Refresh Rate. 
4 Select Power-off USB charge ON/OFF to enable or disable the Power-off USB  charging function.
 
						

							 
Product information
1 Press any MENU key to bring up the OSD. 
2 Using the   /   keys, select   Information from the OSD to display some of  
the monitor’s general information and settigns. 
G-SYNC & the 3D Experience: 
3D visual effects require 3D-compatible software, nVidia® 3D Vision™ glasses and  a compatible nVidia® 3D graphics card.  
G-SYNC requires an NVIDIA GeForce GTX650Ti BOOST GPU or higher. For more  
information, visit the nVidia® website: http://www.nvidia.com/page/home.html 
EN-19
 
						

							EnglishTroubleshooting
Before sending your LCD monitor for servicing, please check the  
troubleshooting list below to see if you can self-diagnose the problem. 
DP mode
ProblemLED statusRemedy
No picture visible Blue Using the OSD, adjust brightness and 
contrast to maximum or reset to their  
default settings.
Off Check the power switch.
Check if the AC power cord is properly  connected to the monitor.
Amber Check if the video signal cable is properly connected at the back of  
monitor. 
Check that the computer system is  
switched on and in power saving/ standby mode. 
EN-20