Acer Xb240h Users Guide

8
English
Standard timing table 
1 640×480@60Hz 
2 720×480@60Hz 
3 720×576@50Hz 
4 800×600@60Hz 
5 1024×768@60Hz 
6 1280×720@60Hz 
7 1280×720@50Hz 
8 1920×1080@30Hz 
9 1920×1080@60Hz
10 1920×1080@50Hz
 Mode Resolution 
*Only for MHL-Model 
1 
2
3 
UXGA   
UXGA 
UXGA  
1920x108000Hz  
 
1920x1080 120 Hz 
1920x1080 144 Hz 
  
1
 

9EnglishInstallation
To install the monitor on your host system, please follow the steps below:
Steps 
1 Connect the video cable
a Make sure both the monitor and computer are switched off. 
b Connect the VGA video cable to the computer.  
c Connect the digital cable (only for dual-input models).
(1) Make sure both the monitor and computer are switched off. 
(2) Connect one end of the 24-pin DVI cable to the back of the 
monitor and the other end to the computers port.
2 Connect the power cord
Connect the...

EN-13USER CONTROLSPower Switch / Power LED:
To  

turn the monitor ON or OFF.
Lights up to indicate the power is turned ON.
Using  the Shortcut Menu
Press the function button to open the shortcut menu. The shortcut menu lets you
quickly select the most commonly accessed settings. Empowering:
Press the Empowering Key to open the Acer eColor Management OSD and access
th e scenario modes.
A

UTO Auto Adjust:
Pr e

ss this button to activate the Auto Adjustment function. The Auto Adjustme
nt
fu
nction is...

EN-14
Main
Menu
icon Sub
Menu
icon Sub
Menu
item De

scription
N/AUser mode Use
 r defined. Settings can be fine-tuned to
suit any situation
N/A  
N/A Standard
mode Defau
 lt Setting. Reflects native display
capability
N/A Grahpic
mode Enhances colors and emphasize fine detail.
Pictures and photographs appear in vibrant colo
 rs with sharp detail.
N/A Movie
m
 odeDisplays scenes in clearest detail.  Presents
g

reat visuals, even in unsuitably-lit
env
 ironments. Acer eColor Management
Operation...

EN-15
Adjusting the OSD settings --------------------------------------------------------------------
Note: 
The following content is for general reference only. Actual
product specifications

 may vary.
The OSD can be used for adjusting the settings of your LCD Monitor.
Press the 

MENU  key to open the OSD. You can use the OSD to adjust the
picture quality,

 OSD position and general settings. For advanced settings,
please 

refer to following page:
Adjusting the picture quality 1Press the MENU
 key to...

EN-16
Adjusting the OSD position
1Press the MENU
 key to bring up the OSD.
2
Using the directional keys, select   OSD from the on screen display.
Then navigate

 to the feature you wish to adjust.
jown·oM()(S4romSYMnuM·Yon*torDVomSYMnuM·s 

EN-17
Adjusting the setting 
1Press the MENU key to bring up the OSD.
2Using the  /  keys, select  Setting from the OSD. Then navigate to
the feature you wish to adjust.
3The Setting menu can be used to adjust the screen Menu Language and
other important settings.
4Select Power-off USB charge ON/OFF to enable/disable Power-off USB 
charge function.
 

EN-18
Product information
1Press the MENU
 key to bring up the OSD.
2
Using the   /   keys, select   Information from the OSD. Then the
basic information of  LCD monitor will show up

 for current input.
1920 x 1080
Information
H:65KHz   V:60HzVGA Input
S/N:ETL5309 1326350380B3742
 

15
EnglishTroubleshooting
Before sending your LCD monitor for servicing, please check the 
troubleshooting list below to see if you can self-diagnose the problem.
VGA mode
ProblemLED statusRemedy
No picture visible Blue Using the OSD, adjust brightness and  contrast to maximum or reset to their 
default settings.
Off Check the power switch.
Check if the power cord is properly 
connected to the monitor.
Amber Check if the video signal cable is  properly connected at the back of 
monitor.
Check if the...

16
English
DVI/DP/HDMI/MHL mode
ProblemLED statusRemedy
No picture visible Blue Using the OSD, adjust brightness and 
contrast to maximum or reset to their 
default settings.
Off Check the power switch.
Check if the AC power cord is properly 
connected to the monitor.
Amber Check if the video signal cable is  properly connected at the back of 
monitor.
Check that the computer system is 
switched on and in power saving/
standby mode.