Acer X243hbd Users Guide
Have a look at the manual Acer X243hbd Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
EN-1024-Pin Color Display Signal Cable PINMeaningPINMeaning 1.TMDS Data2-13.TMDS Data3+ 2.TMDS Data2+14.+5V Power 3. TMDS Data 2/4 Shield 15.GND(return for +5V hsync.vsync) 4.TMDS Data4-16.Hot Plug Detect 5.TMDS Data4+17.TMDS Data0- 6.DDC Clock18.TMDS Data0+ 7.DDC Data19. TMDS Data 0/5 Shield 8. Analogue Vertical Sync 20.TMDS Data5- 9.TMDS Data1-21.TMDS Data5+ 10.TMDS Data1+22.TMDS Clock Shield 11. TMDS Data 1/3 Shield 23.TMDS Clock+ 12.TMDS Data3-24.DDC TMDS Clock-j·w">·EV(VS)r·JS4E"uE>4·"“t·rDQ·JS4E"uE>s
EN-11 Standard Timing Table 1640 x 480 60Hz 2 640 x 48072Hz 3 640 x 48075Hz 4 MAC 640 x 480 66.66 Hz 5 VESA 720 x 40070 Hz 6 SVGAHz 7 SVGA 19 VESA 800 x 600 800 x 600 60 56Hz 8 SVGA800 x 600 72Hz 9 SVGA800 x 600 75Hz MAC 832 x 624 74.55 Hz XGA XGA XGA 1024 x 768 60Hz 1024 x 768 70Hz 1024 x 768 75Hz 1152 x 870 75Hz VESA VESA 1280 x 960 60Hz MAC 1152 x 864 75Hz SXGA SXGA1280 x 1024 60Hz 1280 x 1024 1280 x 720 75 Hz 10 11 12 13 14 15 16 17 18 60Hz SXGA+ WSXGA+ WSXGA+1400 x 1050 60Hz 24 20 WXGA 21 WXGA 22 WXGA+ 1280 x 800 60Hz 60 60 Hz Hz 1360 x 768 1440 x 900 23 WXGA+ 75 Hz1440 x 900 25 60 Hz1680 x 1050 1680 x 1050 26 75 Hz UXGA+ UXGA+1600 x 1200 27 60Hz 1920 x 1080 28 60Hz ModeResolution
EN-12INSTALLATION To install the monitor to your host system, please follow the steps as given below: Steps 1.1-1Connect Video Cable a. Make sure both the monitor and computer are powered-OFF. b. Connect the VGA video cable to the computer. 1-2Digital Cable (Only Dual-Input Model) a. Make sure both the monitor and computer are powered-OFF. b. Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer’s port. 2.Connect power cord Connect the power cord to the monitor, then to a properly grounded AC outlet. 3.Power-ON Monitor and Computer Power-ON the monitor first, then power-ON the computer. This sequence is very important. 4.If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the problem. Audio (optional)DVID-Sub (optional)HDMIUSB Power PowerAudio (optional)D-Sub D-Sub DVI DVI HDMI(optional)
EN-13USER CONTROLS Front Panel Controls 1.Power Switch: To turn ON or OFF the power. 2.Power LED: Lights up to indicate the power is turned ON. 3.Empowering / Exit: 1) When OSD menu is in active status, this button will act as EXIT-KEY(EXIT OSD menu). 2) When OSD menu is in off status, press this button to select scenario mode. 4.Auto Adjust button / Exit: 1)When OSD menu is in active status, this button will act as EXIT-KEY (EXIT OSD menu). 2)When OSD menu is in off status, press this button for 2 seconds to activate the AutoAdjustment function.The Auto Adjustment function is used to set the HPos, VPos, Clock and Focus. 5.< / > Press < or > to select the desired function.Press < or > to change the settings of the current function. 6.MENU / ENTER: Activate OSD menu when OSD is OFF or activate/de-activate adjustment function whenOSD is ON or Exit OSD menu when in Volume Adjust OSD status. 1 345 6 2 5
EN-14 1.Acer eColor Management If selected to “Acer eColor Management “ item, will appear the Acer eColor” OSDHOW TO ADJUST A SETTING 1.Press the MENU-button to activate the OSD window. 2.Press < or > to select the desired function. 3.Press the MENU-button to select the function that you want to adjust. 4.Press < or > to change the settings of the current function. 5.To exit and save, select the exit function. If you want to adjust any other function, repeat steps 2-4. · P/X Series OSD behave When user press “MENU” button on front bezel · OSD and” Key “ locations Value LinePerformance Line and Gamer Line Value Line w/speaker Office Line 1 2j·w">·EV(VS)r·JS4E"uE>4·"“t·rDQ·JS4E"uE>s
EN-15· Acer eColor Management OSD Acer eColor Management Step 1: Press “ Key “ to open the Acer eColor Management OSD and access the scenario modes Step 2:Press “” to select the mode Step 3:Press “ Key “ to confirm the mode and run Auto Adjust Automatic Adjustment Step 1:Press “ Auto Key “to initial scenario mode Step 2:Press “ Auto Key “ again to perform an Auto Adjust · Operation instructionsj·w">·EV(VS)r·JS4E"uE>4·"“t·rDQ·JS4E"uE>s
EN-16 I. Only Analog Input Model 2.USER If selected to “USER” item, will appear the Standard OSD · Features and Benefitsj·w">·EV(VS)r·JS4E"uE>4·"“t·rDQ·JS4E"uE>s
EN-17· ADJUSTING THE PICTURE The descriptions for function control LEDS II. Only Dual Input ModelMain Menu icon Sub Menu icon Sub Menu item Description Contrast Adjusts the contrast between the foreground andbackground of the screen image. Brightness Adjusts the background brightness of the screenimage. ACM ACM (Adaptive Contrast Management): ACM ON/OFF Switch, default is "OFF" Focus Adjusts picture Focus.(available in Analog mode only) Clock Adjusts picture Clock.(available in Analog mode only)j·w">·EV(VS)r·JS4E"uE>4·"“t·rDQ·JS4E"uE>s
EN-18Main Menu Icon Sub Menu Icon Sub Menu Item Description H. Position Adjust the horizontal position. (available in Analog mode only) V. Position Adjust the vertical position. (available in Analog mode only) N/AWarm Set the color temperature to warm white. N/ACool Set the color temperature to cool white. User /Red Adjusts Red/Green/Blue intensity. User /Green User /Blue N/AEnglish Multi-language selection. N/A N/ADeutsch N/AFrancais N/AEspanol N/AItaliano N/A N/A N/ASuomi EMEA version OSD only N/ANederlands N/APyccknnj·w">·EV(VS)r·JS4E"uE>4·"“t·rDQ·JS4E"uE>s
EN-19Main Menu Icon Sub Menu Icon Sub Menu Item Description H. Position Adjust the horizontal position of the OSD. V. Position Adjust the vertical position of the OSD. OSD Timeout Adjust the OSD timeout. N/AAnalogSelect input signal from analog (DSub) N/A Digital (only Dual-Inp- utModel) Select input signal from digital(DVI) (only Dual-Input Model) N/ADDC/CITurn ON/OFF DDC/CI support N/A Informati- on Show the resolution, H/V frequency andinput port of current input timing. N/AReset Clear each old status of Auto- configurationand set the color temperature to Cool. N/AExit Save user adjustment and OSD disappear.j·w">·EV(VS)r·JS4E"uE>4·"“t·rDQ·JS4E"uE>s