Acer X243hb Users Guide

EN-1024-Pin Color Display Signal Cable
PINMeaningPINMeaning 1.TMDS Data2-13.TMDS Data3+
2.TMDS Data2+14.+5V Power
3. TMDS Data 2/4
Shield 15.GND(return for
+5V hsync.vsync)
4.TMDS Data4-16.Hot Plug Detect 5.TMDS Data4+17.TMDS Data0-
6.DDC Clock18.TMDS Data0+
7.DDC Data19. TMDS Data 0/5
Shield
8. Analogue Vertical
Sync 20.TMDS Data5-
9.TMDS Data1-21.TMDS Data5+
10.TMDS Data1+22.TMDS Clock Shield
11. TMDS Data 1/3
Shield 23.TMDS Clock+
12.TMDS Data3-24.DDC TMDS...

EN-11

Standard Timing Table
1640 x 480 60Hz
2 640 x 48072Hz
3 640 x 48075Hz
4 MAC 640 x 480                     66.66 Hz
5 VESA
720 x 40070 Hz
6
SVGAHz
7
SVGA
19 VESA 800 x 600 800 x 600
60
56Hz
8
SVGA800 x 600 72Hz
9
SVGA800 x 600 75Hz
MAC 832 x 624 74.55 Hz
XGA
XGA
XGA 1024 x 768
60Hz
1024 x 768 70Hz
1024 x 768 75Hz
1152 x 870 75Hz
VESA VESA 1280 x 960 60Hz
MAC
1152 x 864 75Hz
SXGA
SXGA1280 x 1024 60Hz
1280 x 1024
1280 x 720 75
Hz
10
11
12
13
14
15
16
17
18 60Hz
SXGA+
WSXGA+
WSXGA+1400 x 1050 60Hz...

EN-12INSTALLATION
To install the monitor to your host system, please follow the steps as given
below:
Steps
1.1-1Connect Video Cable
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the VGA video cable to the computer.
1-2Digital Cable (Only Dual-Input Model) a. Make sure both the monitor and computer are powered-OFF.
b. Connect one end of the 24-pin DVI cable to the back of the
monitor and connect the other end to the computer’s port.
2.Connect power cord Connect the power cord to...

EN-13USER CONTROLS
Front Panel Controls
1.Power Switch:
To turn ON or OFF the power.
2.Power LED:
Lights up to indicate the power is turned ON.
3.Empowering / Exit:
1) When OSD menu is in active status, this button will act as EXIT-KEY(EXIT
OSD menu).
2) When OSD menu is in off status, press this button to select scenario
mode.
4.Auto Adjust button / Exit:
1)When OSD menu is in active status, this button will act as EXIT-KEY (EXIT
OSD menu).
2)When OSD menu is in off status, press this button for 2...

EN-14
1.Acer eColor Management
If selected to “Acer eColor Management “ item, will appear the
Acer eColor” OSDHOW TO ADJUST A SETTING
1.Press the MENU-button  to activate the OSD window.
2.Press < or  > to select the desired function.
3.Press the MENU-button  to select the function that you want to adjust.
4.Press < or  > to change the settings of the current function.
5.To exit and save, select the exit function. If you want to adjust any other
function, repeat steps 2-4.
·
P/X Series OSD behave
When...

EN-15·
Acer eColor Management  OSD
Acer eColor Management Step 1: Press “  Key “ to open the Acer eColor Management OSD and
access the scenario modes
Step 2:Press “” to select the mode
Step 3:Press “   Key “ to confirm the mode and run Auto Adjust
Automatic Adjustment Step 1:Press “ Auto Key “to initial scenario mode
Step 2:Press “ Auto Key “ again to perform an Auto Adjust ·
Operation instructionsj·w">·EV(VS)r·JS4E"uE>4·"“t·rDQ·JS4E"uE>s 

EN-16
I. Only Analog Input Model
2.USER
If selected to “USER” item, will appear the Standard OSD
·
Features and Benefitsj·w">·EV(VS)r·JS4E"uE>4·"“t·rDQ·JS4E"uE>s 

EN-17·
ADJUSTING THE PICTURE
The descriptions for function control LEDS II. Only Dual Input ModelMain
Menu icon Sub
Menu icon Sub
Menu item Description
Contrast Adjusts the contrast between the
foreground andbackground of the
screen image.
Brightness Adjusts the background brightness of
the screenimage.
ACM ACM (Adaptive Contrast Management):
ACM ON/OFF Switch, default  is "OFF"
Focus Adjusts picture Focus.(available in
Analog mode only)
Clock Adjusts picture Clock.(available in
Analog mode...

EN-18Main
Menu Icon Sub Menu
Icon Sub Menu
Item Description
H. Position Adjust the horizontal position.
(available in Analog  mode only)
V. Position Adjust the vertical position.
(available in Analog  mode only)
N/AWarm Set the color temperature to warm
white.
N/ACool Set the color temperature to cool
white.
User /Red
Adjusts Red/Green/Blue intensity.
User /Green
User /Blue
N/AEnglish
Multi-language selection.
N/A
N/ADeutsch
N/AFrancais
N/AEspanol
N/AItaliano
N/A
N/A
N/ASuomi
EMEA version OSD only...

EN-19Main
Menu Icon Sub
Menu Icon Sub Menu
Item Description
H.
Position Adjust the horizontal position of the
OSD.
V.
Position Adjust the vertical position of the OSD.
OSD Timeout Adjust the OSD timeout.
N/AAnalogSelect input signal from analog (DSub)
N/A Digital
(only
Dual-Inp-
utModel) Select input signal from digital(DVI)
(only Dual-Input Model)
N/ADDC/CITurn ON/OFF DDC/CI support
N/A Informati-
on Show the resolution, H/V frequency
andinput port of current input timing.
N/AReset Clear each old...