Acer X223wqbd Users Guide

							X223WEN-1024-Pin Color Display Signal Cable
PINMeaningPINMeaning 1.TMDS Data2-13.TMDS Data3+
2.TMDS Data2+14.+5V Power
3. TMDS Data 2/4
Shield 15.GND(return for
+5V hsync.vsync)
4.TMDS Data4-16.Hot Plug Detect 5.TMDS Data4+17.TMDS Data0-
6.DDC Clock18.TMDS Data0+
7.DDC Data19. TMDS Data 0/5
Shield
8. Analogue Vertical
Sync 20.TMDS Data5-
9.TMDS Data1-21.TMDS Data5+
10.TMDS Data1+22.TMDS Clock Shield
11. TMDS Data 1/3
Shield 23.TMDS Clock+
12.TMDS Data3-24.DDC TMDS Clock-
j·w">·EV(VS)r·JS4E"uE>4·"“t·rDQ·JS4E"uE>s 
						

							EN-11
X223W
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
XGA
SXGA XGA  VGA
SVGA  WSXGA+
EGA  SXGA 
SXGA+ 
UXGA 
WXGA 
WXGA+  XGA SVGA VGA 640*480@60Hz
640*480@72Hz
640*480@75Hz
800*600@56Hz
800*600@60Hz
800*600@72Hz
800*600@75Hz
1024*768@60Hz
1024*768@70Hz
1024*768@75Hz
1152*864@75Hz
1280*960@60Hz
1152*720@60Hz
1280*1024@60Hz
1280*1024@75Hz
1400x1050@60Hz
1600*1200@60Hz
1360*768@60Hz
1440*900(Red)@60Hz
1440*900@75Hz
1680*1050@60Hz
640*350@70Hz
720x400@70Hz
640*[email protected]
832*624@75Hz
1024*768@75Hz
1152*870@75Hz
1024*768@72Hz
1280*1024@70Hz To reduce the need for adjustment for different modes, the monitor has
default setting modes that are most commonly used as given in the table
below. For optimum adjustment, the user is suggested to perform the
Auto Setup under Windows “Full Screen“ pattern or using the pattern in
the floppy disk provided. When none of the mode is matched, the user can
store their preferred modes in the user modes. The monitor is capable of
storing up to 9 user modes. The only condition to store as a user mode is
the new display information must have 1 KHz difference for horizontal
frequency or 1 Hz for vertical frequency or the sync signal polarities are
different from  the default modes.
Standard Timing Table
ModeResolution
j·w">·EV(VS)r·JS4E"uE>4·"“t·rDQ·JS4E"uE>s 
						

							X223WEN-12
INSTALLATION
T
o install the monitor to your host system, please follow the steps as given
below:
Steps
1.1-1Connect Video Cable a. Make sure both the monitor and computer are powered-OFF.
b. Connect the VGA video cable to the computer.
1-2Digital Cable (Only Dual-Input Model) a. Make sure both the monitor and computer are powered-OFF.
b. Connect one end of the 24-pin DVI cable to the back of the
monitor and connect the other end to the computer’s port.
2.Connect power cord Connect the power cord to the monitor, then to a properly grounded AC
outlet.
3.Power-ON Monitor and Computer Power-ON the monitor first, then power-ON the computer.
This sequence is very important.
4.If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the problem.j·w">·EV(VS)r·JS4E"uE>4·"“t·rDQ·JS4E"uE>s 
						

							EN-13X223W
USER CONTROLS
Front
  Panel Controls
1.Power Switch:
To turn ON or OFF the power.
2.Power LED:
Lights up to indicate the power is turned ON.
3.Empowering / Exit:
1) When OSD menu is in active status, this button will act as EXIT-KEY(EXIT
OSD menu).
2) When OSD menu is in off status, press this button to select scenario
mode.
4.Auto Adjust button / Exit:
1)When OSD menu is in active status, this button will act as EXIT-KEY (EXIT
OSD menu).
2)When OSD menu is in off status, press this button for 2 seconds to
activate the AutoAdjustment function.The Auto Adjustment function is
used to set the HPos, VPos, Clock and Focus.
5.< / >
Press < or  > to select the desired function.Press < or  > to change the
settings of the current function.
6.MENU / ENTER:
Activate OSD menu when OSD is OFF or activate/de-activate adjustment
function whenOSD is ON or Exit OSD menu when in Volume Adjust OSD
status. 1
345 6 2
5 
						

							X223WEN-14
1.Acer eColor Management
If selected to “Acer eColor Management “ item, will appear the
Acer eColor” OSD
HOW TO ADJUST A SETTING
1
 .Press the MENU-button  to activate the OSD window.
2.Press < or  > to select the desired function.
3.Press the MENU-button  to select the function that you want to adjust.
4.Press < or  > to change the settings of the current function.
5.To exit and save, select the exit function. If you want to adjust any other
function, repeat steps 2-4.
· P/X Series OSD behave
When user press “MENU” button on front bezel
· OSD and”  Key “ locations
Value LinePerformance Line and
Gamer Line
Value Line
w/speaker
Office Line 1
2j·w">·EV(VS)r·JS4E"uE>4·"“t·rDQ·JS4E"uE>s 
						

							EN-15X223W
·
A
 cer eColor Management 
OSD
Acer eColor Management Step 1: Press “  Key “ to open the Acer eColor Management OSD and
access the scenario modes
Step 2:Press “” to select the mode
Step 3:Press “   Key “ to confirm the mode and run Auto Adjust
Automatic Adjustment Step 1:Press “ Auto Key “to initial scenario mode
Step 2:Press “ Auto Key “ again to perform an Auto Adjust ·
Operation instructionsj·w">·EV(VS)r·JS4E"uE>4·"“t·rDQ·JS4E"uE>s 
						

							X223WEN-16
I. Only Analog Input Model
2.USER
If selected to “USER” item, will appear the Standard OSD
·
Features and Benefits
j·w">·EV(VS)r·JS4E"uE>4·"“t·rDQ·JS4E"uE>s 
						

							EN-17X223W
·
A
 DJUSTING THE PICTURE
The descriptions for function control LEDS II. Only Dual Input ModelMain
Menu icon Sub
Menu icon Sub
Menu item Description
Contrast Adjusts the contrast between the
foreground andbackground of the
screen image.
Brightness Adjusts the background brightness of
the screenimage.
ACM ACM (Adaptive Contrast Management):
ACM ON/OFF Switch, default  is "OFF"
Focus Adjusts picture Focus.(available in
Analog mode only)
Clock Adjusts picture Clock.(available in
Analog mode only)j·w">·EV(VS)r·JS4E"uE>4·"“t·rDQ·JS4E"uE>s 
						

							X223WEN-18Main
Menu Icon Sub Menu
Icon Sub Menu
Item Description
H. Position Adjust the horizontal position.
(available in Analog  mode only)
V. Position Adjust the vertical position.
(available in Analog  mode only)
N/AWarm Set the color temperature to warm
white.
N/ACool Set the color temperature to cool
white.
User /Red
Adjusts Red/Green/Blue intensity.
User /Green
User /Blue
N/AEnglish
Multi-language selection.
N/A
N/ADeutsch
N/AFrancais
N/AEspanol
N/AItaliano
N/A
N/A
N/ASuomi
EMEA version OSD only
N/ANederlands
N/APyccknn
j·w">·EV(VS)r·JS4E"uE>4·"“t·rDQ·JS4E"uE>s 
						

							X223W