Acer X213hbid Users Guide
Here you can view all the pages of manual Acer X213hbid Users Guide. The Acer manuals for Monitor are available online for free. You can easily download all the documents as PDF.
Page 11
EN-9PIN NO.DESCRIPTIONPIN NO.DESCRIPTION 1.Red9.+5V 2.Green10.Logic Ground 3.Blue11.Monitor Ground 4.Monitor Ground12.DDCSerial Data 5.DDC-return13.H-Sync 6.R-Ground14.V-Sync 7.G-Ground15.DDC-Serial Clock 8.B-GroundCONNECTOR PIN ASSIGNMENT 15-Pin Color Display Signal Cablej·w">·EV(VS)r·JS4E"uE>4·"“t·rDQ·JS4E"uE>s
Page 12
EN-1024-Pin Color Display Signal Cable PINMeaningPINMeaning 1.TMDS Data2-13.TMDS Data3+ 2.TMDS Data2+14.+5V Power 3. TMDS Data 2/4 Shield 15.GND(return for +5V hsync.vsync) 4.TMDS Data4-16.Hot Plug Detect 5.TMDS Data4+17.TMDS Data0- 6.DDC Clock18.TMDS Data0+ 7.DDC Data19. TMDS Data 0/5 Shield 8. Analogue Vertical Sync 20.TMDS Data5- 9.TMDS Data1-21.TMDS Data5+ 10.TMDS Data1+22.TMDS Clock Shield 11. TMDS Data 1/3 Shield 23.TMDS Clock+ 12.TMDS Data3-24.DDC TMDS...
Page 13
EN-11 Standard Timing Table ModeMode 1640 x 480 60Hz 2 3 4MAC640 x 480 66.66Hz 5VESA720x40070Hz 6SVGAHz 7SVGA800 x 600 800 x 600 60 56 Hz 8 9 XGA XGA 1024 x 76860Hz 1024 x 76870Hz VESA1152 x 86475Hz SXGA 1280 x 102460Hz 10 11 12 WXGA WXGA+ 1280 x 80060Hz 60 Hz1440 x 900 UXGA60 Hz 1920 x 1080
Page 14
EN-12INSTALLATION To install the monitor to your host system, please follow the steps as given below: Steps 1.1-1Connect Video Cable a. Make sure both the monitor and computer are powered-OFF. b. Connect the VGA video cable to the computer. 1-2Digital Cable (Only Dual-Input Model) a. Make sure both the monitor and computer are powered-OFF. b. Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer’s port. 2.Connect power cord Connect the power cord to...
Page 15
EN-13USER CONTROLS Front Panel Controls 1.Power Switch: To turn ON or OFF the power. 2.Power LED: Lights up to indicate the power is turned ON. 3.Empowering / Exit: 1) When OSD menu is in active status, this button will act as EXIT-KEY(EXIT OSD menu). 2) When OSD menu is in off status, press this button to select scenario mode. 4.Auto Adjust button / Exit: 1)When OSD menu is in active status, this button will act as EXIT-KEY (EXIT OSD menu). 2)When OSD menu is in off status, press this button for 2...
Page 16
EN-14 1.Acer eColor Management If selected to “Acer eColor Management “ item, will appear the Acer eColor” OSDHOW TO ADJUST A SETTING 1.Press the MENU-button to activate the OSD window. 2.Press < or > to select the desired function. 3.Press the MENU-button to select the function that you want to adjust. 4.Press < or > to change the settings of the current function. 5.To exit and save, select the exit function. If you want to adjust any other function, repeat steps 2-4. · P/X Series OSD behave When...
Page 17
EN-15· Acer eColor Management OSD Acer eColor Management Step 1: Press “ Key “ to open the Acer eColor Management OSD and access the scenario modes Step 2:Press “” to select the mode Step 3:Press “ Key “ to confirm the mode and run Auto Adjust Automatic Adjustment Step 1:Press “ Auto Key “to initial scenario mode Step 2:Press “ Auto Key “ again to perform an Auto Adjust · Operation instructionsj·w">·EV(VS)r·JS4E"uE>4·"“t·rDQ·JS4E"uE>s
Page 18
EN-16 I. Only Analog Input Model 2.USER If selected to “USER” item, will appear the Standard OSD · Features and Benefitsj·w">·EV(VS)r·JS4E"uE>4·"“t·rDQ·JS4E"uE>s
Page 19
EN-17· ADJUSTING THE PICTURE The descriptions for function control LEDS II. Only Dual Input ModelMain Menu icon Sub Menu icon Sub Menu item Description Contrast Adjusts the contrast between the foreground andbackground of the screen image. Brightness Adjusts the background brightness of the screenimage. ACM ACM (Adaptive Contrast Management): ACM ON/OFF Switch, default is "OFF" Focus Adjusts picture Focus.(available in Analog mode only) Clock Adjusts picture Clock.(available in Analog mode...
Page 20
EN-18Main Menu Icon Sub Menu Icon Sub Menu Item Description H. Position Adjust the horizontal position. (available in Analog mode only) V. Position Adjust the vertical position. (available in Analog mode only) N/AWarm Set the color temperature to warm white. N/ACool Set the color temperature to cool white. User /Red Adjusts Red/Green/Blue intensity. User /Green User /Blue N/AEnglish Multi-language selection. N/A N/ADeutsch N/AFrancais N/AEspanol N/AItaliano N/A N/A N/ASuomi EMEA version OSD only...