Acer X203hbd Users Guide

EnglishInstallation
To install the monitor on your host system, please follow the steps below:
Steps 
1 Connect the video cable
a Make sure both the monitor and computer are switched off.
b Connect the VGA video cable to the computer. 
c Connect the digital cable (only for dual-input models).
(1) Make sure both the monitor and computer are switched off.
(2) Connect one end of the 24-pin DVI cable to the back of the monitor and the other end to the computers port.
2 Connect the power cord Connect the...

English
User controls
Front panel controls
1     Power LED: Lights up to indicate the power is turned on. 
2     Power Switch : Turn the power on or off. 
3.4   < / >  : Press < or > to navigate to the desired function, press Enter to   
            select the function. Press < or > to change the settings of the   
           current function. 
5     Menu/Enter : Activate the OSD menu when the OSD is off or activate 
                  / deactivate the adjustment function when the OSD is on. 
6    Auto...

EnglishHow to adjust a setting
1 Press the Menu button to activate the OSD window. 
2 Press  < or  > to select the desired function. 
3 Press the  Menu button again to select the function that you want to 
adjust. 
4 Press  < or  > to change the settings  of the current function. 
5 To exit and save, select the exit function. If you want to adjust any other  function, repeat steps 2 to 4.
A.Acer eColor Management:  If Acer eColor Management is selected, 
the Acer eColor Management OSD will appear.
B....

English
Acer eColor Management
•Operation instructions
1 Press the  Empowering Key to open the Acer eColor Management 
OSD and access the scenario modes.
2 Press < or > to select the mode.
3 Press the Auto-adjust button to  confirm the mode and run Auto 
Adjust.
•Features and benefits
Main 
menu 
iconSub menu itemDescription
User mode User-defined. Settings can be fine-tuned to  suit any situation.
Text mode Optimal balance of brightness and contrast to  prevent eyestrain. The most comfortable way 
to...

EnglishUser
Main 
menu 
iconSub 
menu 
icon
Sub menu itemDescription
Contrast Adjusts the contrast between the  foreground and background of the 
screen image.
Brightness  Adjusts the backgr ound brightness of the 
screen image.
ACM ACM (Adaptive Contrast Management)  ACM On/Off switch, default  Off. 
Focus Adjusts picture focus (available in analog  mode only).
Clock Adjusts the picture clock (available in  analog mode only).
H. Position Adjusts the horizontal position (available  in analog mode...

EnglishTroubleshooting
Before sending your LCD monitor for servicing, please check the 
troubleshooting list below to see if you can self-diagnose the problem.
VGA mode
ProblemLED statusRemedy
No picture visible Blue Using  the OSD, adjust brightness and 
contrast to maximum or reset to their 
default settings.
Off Check the power switch.
Check if the power cord is properly 
connected to the monitor.
Amber Check if the video signal cable is  properly connected at the back of 
monitor.
Check if the...

English
DVI mode
ProblemLED statusRemedy
No picture visible Blue Using th e OSD, adjust brightness and 
contrast to maximum or reset to their 
default settings.
Off Check the power switch.
Check if the AC power cord is properly 
connected to the monitor.
Amber Check if the video signal cable is  properly connected at the back of 
monitor.
Check that the computer system is 
switched on and in power saving/
standby mode.