Acer X183hb Users Guide

							EN-20
(VGA Mode)TROUBLESHOOTING
B
 efore sending your LCD monitor for servicing, please check the trouble-
shooting list below to see if you can self-diagnose the problem.
ProblemsCurrent StatusRemedy
No Picture LED ON·Using OSD, adjust brightness and contrast
to maximum or reset to their default
settings.
LED OFF·Check the power switch. ·Check if AC power cord is properlyconnected to the monitor.
LED displays
amber color ·Check if video signal cable is properly
connected at the back of monitor.
·Check if the power of computer system is ON.
Abnormal
Picture Unstable
Picture
·Check if the specification of graphics
adapter and monitor is in compliance
which may be causing the input signal
frequency mismatch.
Display is
missing, center shift, or too
small or too
large in display
size ·Using OSD, adjust RESOLUTION, CLOCK,
CLOCK-PHASE, H-POSITION and V-
POSITION with non-standard signals.
·Using OSD, in case of missing full-screen image, please select other resolution orother vertical refresh timing.
·Wait for a few seconds after adjusting the size of the image before changing or
disconnecting the signal cable or powering
OFF the monitor.j·w">·EV(VS)r·JS4E"uE>4·"“t·rDQ·JS4E"uE>s 
						

							EN-21(DVI Mode)
ProblemsCurrent StatusRemedy
No Picture LED ON·Using OSD, adjust brightness and
contrast to maximum or reset to their
default settings.
LED OFF·Check the power switch. ·Check if AC power cord is properlyconnected to the monitor.
LED displays
amber color ·Check if video signal cable is properly
connected at the back of monitor.
·Check if the power of computer system is ON.j·w">·EV(VS)r·JS4E"uE>4·"“t·rDQ·JS4E"uE>s 
						

							
Federal Communications CommissionDeclaration of Conformity
This  device  complies  with  Part  15  of  the  FCC  Rules.  Operation  is  subject  to  the
following  two  conditions:  (1)  this  device  may not  cause  harmful  interference,  and  (2)
this  device  must  accept  any  interference  received,  including  interference  that  may
cause undesired operation.
The following local Manufacturer /Importer is responsible for this declaration:
Product:  18.5” LCD Monitor
Model Number: X183H
SKU Numbe r: X183H xxx
(“x” = 0~9, a ~ z, or A ~ Z)
Name of Responsible Party:  Acer America Corporation
Address of Responsible Party:  333 West San Carlos St. San Jose, CA 95110
U. S. A.
Contact Person: Acer Representative
Phone No.: 254-298-4000
Fax No.: 254-298-4147 EN-22
 
						

							
EN-23  
                 Acer Incorporated8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih 
Taipei Hsien 221, Taiwan
Declaration of Conformity 
We,Acer Incorporated
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan 
Contact Person: Mr. Easy Lai 
Tel: 886-2-8691-3089 Fax: 886-2-8691-3120 
E-mail:  [email protected]
Hereby declare that: 
Product:   
Trade Name:   Acer or eMachines or Gateway or packard bell 
Model Number:  
SKU Number: 
Is compliant with the essential requirements and other  relevant provisions of the following EC directives, 
and  that  all  the  necessary  steps  have  been  taken  and  are  in  force  to  assure  that  production  units  of  the 
same product will continue comply with the requirements.
EMC Directive 2004/108/EC as attested by conformity with the following 
harmonized standards: 
-. EN55022:2006, AS/NZS CISPR22:2006, Class B 
-. EN55024:1998 + A1:2001 + A2:2003 
-. EN61000-3-2:2006, Class D 
-. EN61000-3-3:1995 + A1:2001+A2: 2005  
Low  Voltage  Directive  2006/95/EC  as  attested  by  conformity  with  the  following 
harmonized standard: 
-. EN60950-1:2001 + A11:2004 
RoHS Directive 2002/95/EC on the Restriction of the Use of certain Hazardous 
Substances in Electrical and Electronic Equipment 
Year to begin affixing CE marking 2009. 
_______________________________Feb. 27, 2009-Easy Lai /Manager                                   Date 
Regulation, Acer Inc. 18.5” LCD Monitor 
X
X    183H 
   183H xxx
(“x” = 0~9, a ~ z, A ~ Z or Blank)
 
						

							
EN-24
ENERGY STAR®
Acer’s ENERGY STAR qualified products save you money by reducing 
energy costs and helps  protect the environment without sacrificing features
 or performance. Acer is proud to offer our customers products with the 
What is ENERGY STAR?
Products that are ENERGY STAR qualified use less energy and prevent 
 greenhouse gas emissions by meeting strict energy efficiency guidelines
 set by the U.S. Environmental Protection Agency. Acer is committed to offer   products and services worldwide that help customers save money, conserve 
 energy and improve the quality of our environment. The more energy we can   save through energy efficiency, the more wereduce greenhouse gases and 
 
 the risks of climate change. More information refers to 
http://www.energystar.gov orhttp://www.energystar.gov/powermangement
Acer ENERGY STAR qualified products:
•Produce less heat and reduce cooling loads, and warmer climates.
•Automatically go into “display sleep” and “computer sleep” mode after 15
 and 30 minute of inactivity respectively.  
•Wake the monitor when it is in Active Off mode , move the mouse or press  any keyboard key. 
•Computers will save more than 80% energy at “sleep” mode.
ENERGY STAR and the ENERGY STAR mark are registered U.S.
ENERGY STAR mark. 
 marks