Acer X163w Users Guide

							EN-10S

tandard Timing TableX163W
ModeResolution
1280  x 960
1280  
x 720
1366  x
 768
V
ESA
VESA 6
0Hz
6 0Hz
60Hz
1
2
3
4
5
6
7
8
9
10
1
 1 6

40 x 480
640 x 480
720  
x 40 0
8

00 x 600
800 x 600
1024  
x7 68
1024  x768
1280  
x 800
V

ESA
MAC
SVGA
SVGA
XGA
XGA 60Hz
66.66Hz
70Hz
56Hz
60Hz
6
0Hz
7
 0Hz
60Hz
V

ESA
WXGA WXGA
 
						

							EN-11INSTALLATION
T
o install the monitor to your host system, please follow the steps as given
below:
Steps
1.Connect Video Cable a. Make sure both the monitor and computer are powered-OFF.
b. Connect the VGA video cable to the computer.
2.Connect power cord Connect the power cord to the monitor, then to a properly grounded AC
outlet.
3.Power-ON Monitor and Computer Power-ON the monitor first, then power-ON the computer.
This sequence is very important.
4.If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the problem.
X163W
 
						

							EN-12USER CONTROLS
Front
 Panel Controls
1.Power Switch:
To turn ON or OFF the power.
2.Power LED:
Lights up to indicate the power is turned ON.
3.Empowering / Exit:
1) When OSD menu is in active status, this button will act as EXIT-KEY(EXIT
OSD menu).
2) When OSD menu is in off status, press this button to select scenario
mode.
4.Auto Adjust button / Exit:
1)When OSD menu is in active status, this button will act as EXIT-KEY (EXIT
OSD menu).
2)When OSD menu is in off status, press this button for 2 seconds to
activate the AutoAdjustment function.The Auto Adjustment function is
used to set the HPos, VPos, Clock and Focus.
5.< / >
Press < or  > to select the desired function.Press < or  > to change the
settings of the current function.
6.MENU / ENTER:
Activate OSD menu when OSD is OFF or activate/de-activate adjustment
function whenOSD is ON or Exit OSD menu when in Volume Adjust OSD
status. 1
345 6 2
5
X163W
 
						

							EN-13
1.Acer eColor Management
If selected to “Acer eColor Management “ item, will appear the
Acer eColor” OSDHOW TO ADJUST A SETTING
1
 .Press the MENU-button  to activate the OSD window.
2.Press < or  > to select the desired function.
3.Press the MENU-button  to select the function that you want to adjust.
4.Press < or  > to change the settings of the current function.
5.To exit and save, select the exit function. If you want to adjust any other
function, repeat steps 2-4.
· P/X Series OSD behave
When user press “MENU” button on front bezel
· OSD and”  Key “ locations
Value LinePerformance Line and
Gamer Line
Value Line
w/speaker
Office Line 1
2
X163W
 
						

							EN-14·
Acer eColor Management  OSD
Acer eColor Management Step 1: Press “  Key “ to open the Acer eColor Management OSD and
access the scenario modes
Step 2:Press “” to select the mode
Step 3:Press “   Key “ to confirm the mode and run Auto Adjust
Automatic Adjustment Step 1:Press “ Auto Key “to initial scenario mode
Step 2:Press “ Auto Key “ again to perform an Auto Adjust ·
Operation instructionsX163W
 
						

							EN-15
I. Only Analog Input Model
2.USER
If selected to “USER” item, will appear the Standard OSD
·
Features and BenefitsX163W
 
						

							EN-16·
ADJUSTING THE PICTURE
The descriptions for function control LEDS II. Only Dual Input ModelMain
Menu icon Sub
Menu icon Sub
Menu item Description
Contrast Adjusts the contrast between the
foreground andbackground of the
screen image.
Brightness Adjusts the background brightness of
the screenimage.
ACM ACM (Adaptive Contrast Management):
ACM ON/OFF Switch, default  is "OFF"
Focus Adjusts picture Focus.(available in
Analog mode only)
Clock Adjusts picture Clock.(available in
Analog mode only)X163W
 
						

							EN-17Main
Menu Icon Sub Menu
Icon Sub Menu
Item Description
H. Position Adjust the horizontal position.
(available in Analog  mode only)
V. Position Adjust the vertical position.
(available in Analog  mode only)
N/AWarm Set the color temperature to warm
white.
N/ACool Set the color temperature to cool
white.
User /Red
Adjusts Red/Green/Blue intensity.
User /Green
User /Blue
N/AEnglish
Multi-language selection.
N/A
N/ADeutsch
N/AFrancais
N/AEspanol
N/AItaliano
N/A
N/A
N/ASuomi
EMEA version OSD only
N/ANederlands
N/APyccknnX163W
 
						

							X163W
EN-18
 
						

							EN-19
(VGA Mode)TROUBLESHOOTING
B
 efore sending your LCD monitor for servicing, please check the trouble-
shooting list below to see if you can self-diagnose the problem.
ProblemsCurrent StatusRemedy
No Picture LED ON·Using OSD, adjust brightness and contrast
to maximum or reset to their default
settings.
LED OFF·Check the power switch. ·Check if AC power cord is properlyconnected to the monitor.
LED displays
amber color ·Check if video signal cable is properly
connected at the back of monitor.
·Check if the power of computer system is ON.
Abnormal
Picture Unstable
Picture
·Check if the specification of graphics
adapter and monitor is in compliance
which may be causing the input signal
frequency mismatch.
Display is
missing, center shift, or too
small or too
large in display
size ·Using OSD, adjust RESOLUTION, CLOCK,
CLOCK-PHASE, H-POSITION and V-
POSITION with non-standard signals.
·Using OSD, in case of missing full-screen image, please select other resolution orother vertical refresh timing.
·Wait for a few seconds after adjusting the size of the image before changing or
disconnecting the signal cable or powering
OFF the monitor.
X163W